Broadband quadrature-squeezed vacuum and nonclassical photon number correlations from a nanophotonic device

We report the first demonstrations of both quadrature squeezed vacuum and photon number difference squeezing generated in an integrated nanophotonic device. Squeezed light is generated via strongly driven spontaneous four-wave mixing below threshold in silicon nitride microring resonators. The generated light is characterized with both homodyne detection and direct measurements of photon statistics using photon number-resolving transition edge sensors. We measure $1.0(1)$~dB of broadband quadrature squeezing (${\sim}4$~dB inferred on-chip) and $1.5(3)$~dB of photon number difference squeezing (${\sim}7$~dB inferred on-chip). Nearly-single temporal mode operation is achieved, with raw unheralded second-order correlations $g^{(2)}$ as high as $1.87(1)$ measured (${\sim}1.9$~when corrected for noise). Multi-photon events of over 10 photons are directly detected with rates exceeding any previous quantum optical demonstration using integrated nanophotonics. These results will have an enabling impact on scaling continuous variable quantum technology.Comment: Significant improvements and updates to photon number squeezing results and discussions, including results on single temporal mode operatio

Advances in Optical Amplifiers

Optical amplifiers play a central role in all categories of fibre communications systems and networks. By compensating for the losses exerted by the transmission medium and the components through which the signals pass, they reduce the need for expensive and slow optical-electrical-optical conversion. The photonic gain media, which are normally based on glass- or semiconductor-based waveguides, can amplify many high speed wavelength division multiplexed channels simultaneously. Recent research has also concentrated on wavelength conversion, switching, demultiplexing in the time domain and other enhanced functions. Advances in Optical Amplifiers presents up to date results on amplifier performance, along with explanations of their relevance, from leading researchers in the field. Its chapters cover amplifiers based on rare earth doped fibres and waveguides, stimulated Raman scattering, nonlinear parametric processes and semiconductor media. Wavelength conversion and other enhanced signal processing functions are also considered in depth. This book is targeted at research, development and design engineers from teams in manufacturing industry, academia and telecommunications service operators

Performance improvement of SS-WDM passive optical networks using semiconductor optical amplifiers: Modeling and experiment

Les sources incohérentes sont proposées comme alternatives aux lasers stabilisés en longueur d'onde pour réduire le coût des réseaux optiques passifs utilisant le multiplexage par longueur d'onde découpée dans le spectre (SS-WDM PONs). À cause de leur nature incohérente, ces sources génèrent au récepteur un large bruit d'intensité. Ce bruit limite l'efficacité spectrale et/ou le taux binaire pouvant être achevé. Cette thèse étudie l'utilisation des amplificateurs optique à semi-conducteur SOAs pour nettoyer le bruit d'intensité. De plus, lors de cette thèse, nous explorons les outils numériques et expérimentaux qui nous permettent d'analyser les performances des SOAs dans le cadre de systèmes de communication multi-canaux, incluant le SS-WDM. Nous présentons des modèles mathématiques pour le bruit d'intensité, ce bruit étant celui qui limite les performances des systèmes de communication utilisant des sources incohérentes. Nous discutons les dynamiques complexes des SOAs et présentons les équations qui gouvernent l'évolution des porteurs de charges dans ces amplificateurs. Nous identifions et soulignons l'effet des paramètres les plus importants, qui affectent le processus ainsi que la dynamique de nettoyage du bruit d'intensité. Nous passons en revue, les différentes techniques de nettoyage de bruit avec les SOAs, qui ont démontré les meilleurs résultats connus. De plus, nous effectuons une revue de littérature poussée pour ce qui a attrait au problème de post-filtrage lorsque le SOA est placé au transmetteur, avant la modulation. Notre première contribution pendant ce travail de recherche est de démontrer, en utilisant l'intermodulation de gain d'un SOA au récepteur pour convertir le signal incohérent en laser cohérent, une amélioration significative du taux d'erreur binaire BER. Cette méthode est spectralement efficace, d'autant plus qu'elle ne souffre point la limitation occasionnée par le post-filtrage au récepteur. En contre partie elle nécessite un ample budget de puissance qui doit assurer une saturation suffisante de l'amplificateur au récepteur. Une source laser est aussi nécessaire au récepteur. Ceci est un inconvénient, même si une telle source n'ait pas besoin d'une quelconque stabilisation. Pour contourner le problème causé par le post-filtrage quand le SOA est au transmetteur, nous proposons un nouveau récepteur pour les systèmes de communication WDM, qui permet de mieux garder le nettoyage de bruit, et ce malgré le filtrage optique au récepteur. La nouvelle méthode consiste en un détecteur balancé utilisé au récepteur: d'un bord, tous les canaux sont détectés sans distinction. De l'autre, le signal désiré est bloqué pendant que tous les autres canaux sont détectés. Avec cette méthode, il est facile de saturer l'amplificateur pour une meilleure suppression de bruit tout en évitant en grande partie la dégradation causé par le post-filtrage. Nous avons expérimentalement démontré un système WDM dense de 8 x 10 Gbps avec une source incohérente et un SOA en saturation. Une autre contribution originale de ce travail est le développement d'un outil de simulation pour les SOAs qui est numériquement plus efficace et léger que les modèles connus à ce jour. Nous avons donc développé un modèle théorique simple, pouvant être implémenté par diagramme block, dans le but de simuler les performances des hens de communications WDM. Notre modèle démontre une bonne concordance avec les résultats expérimentaux ainsi qu'une diminution de temps de calcul de l'ordre de 20 fois. Finalement, lors de la dernière partie de ces travaux, nous nous sommes occupés de mesurer, de façon précise, le temps de recouvrement du gain dans un SOA. Le temps de recouvrement des porteurs dans un SOA est un des paramètres les plus importants qui sont à l'origine du phénomène de nettoyage de bruit et qui régissent le comportement ainsi que les dynamiques de l'amplificateur. Nous avons étudié en particulier, la dépendance de ce temps de recouvrement r de la longueur d'onde. Pour le SOA utilisé lors de notre étude expérimentale, nous avons démontré que r dépendait de la longueur d'onde de façon similaire au spectre de gain. Ces mesures ont été possibles grâce au développement d'un nouveau dispositif de mesure pompe/sonde, qui permettait de mesurer le recouvrement du gain pour une pompe et une sonde à la même longueur d'onde et ayant le même état de polarisation

Fiber amplifiers, directly modulated transmitters and a ring network structure for optical communications

The three technologies that are considered the key elements in building a metropolitan area optical network are studied in this thesis. They are optical amplification, high-speed low cost transmitters and ring network structures. These studies concentrate on cost reduction of these three technologies thus enabling the use of optical networks in small customer base metropolitan areas. The research on optical amplification concentrated first on the solution doping process, at present the most used method for producing erbium doped fiber. It was found that separationing the soot growth and the sintering improved the uniformity of the porous layer. This made the homogeneity of the doping concentration in the fiber core better. The effects of index profile variations that arise from the non-ideal solution doping process were also simulated. In the search for a better doping method a new nanoparticle glass-forming process, the direct nanoparticle deposition, was developed. In this process the doping is done simultaneously with glass formation. Utilizing this new process it was possible to improve the uniformity of the doping resulting in higher usable doping levels and shorter erbium doped fiber lengths in the amplifiers. There were fewer limitations in the amplifier caused by optical non-linearities and polarization mode dispersion since shorter fiber lengths were needed. The double cladding fiber, which avoids the costly coupling of the pump laser into a single mode waveguide, was also studied. This pumping scheme was found to improve the inversion uniformity in the erbium doped fiber core thereby enhancing the power conversion efficiency for the long wavelength band amplifier. In characterizing the erbium doped fiber amplifier the gain and noise figure was measured with a temporal filter setup. It was made of simple, low cost components but yielded accurate measurements since the noise originating from the amplified spontaneous emission was measured at the signal wavelength. In the study of fiber amplifier controlling schemes the input power of the fiber amplifier was successfully used to regulate the pump laser. This feed-forward control scheme provides a simple, low cost control and managment system for the erbium doped fiber amplifier in metropolitan area network applications that require flexible adding and dropping of wavelength channels. The transmitter research focused on the DFB laser due to its simplicity and low cost structure. A solid state Fabry-Perot etalon made from double polished silicon chip was used as a frequency discriminator in the chirp analyser developed for the DFB lasers. This wavelength discriminator did not require repeated calibration or active stabilisation and was controled electrically enabling automatic measurements. The silicon Fabry-Perot etalon was also used for simultaneous spectral filtering and wavelength control of the laser. The usable dispersion limited transmission length was increased when the filter was used in conjunction with the directly modulated distributed feedback laser transmitter. The combination of spatial multiplexing and dense wavelength division multiplexing in ring topology was investigated in the course of the research on the ring network as the feeder part of the metropolitan network. A new way to organize different wavelengths and fibers was developed. This ring network structure was simulated and an experimental ring network built. The results of the studies demonstrated that the same limitations effecting uni-directional ring structures also are the main limitations on the scalability of the spatial and wavelength division multiplexed ring networks based on bi-directional transmission when the node spacing is short. The developed ring network structure demonstrated major cost reductions when compared with the heavy use of wavelength division multiplexing. The node structure was also greatly simplified resulting in less need for different wavelength transmitters in each node. Furthermore the node generated only minor losses for the passing signals thus reducing the need for optical amplification.reviewe

Devices and Fibers for Ultrawideband Optical Communications

Wavelength-division multiplexing (WDM) has historically enabled the increase in the capacity of optical systems by progressively populating the existing optical bandwidth of erbium-doped fiber amplifiers (EDFAs) in the C-band. Nowadays, the number of channels—needed in optical systems—is approaching the maximum capacity of standard C-band EDFAs. As a result, the industry worked on novel approaches, such as the use of multicore fibers, the extension of the available spectrum of the C-band EDFAs, and the development of transmission systems covering C- and L-bands and beyond. In the context of continuous traffic growth, ultrawideband (UWB) WDM transmission systems appear as a promising technology to leverage the bandwidth of already deployed optical fiber infrastructure and sustain the traffic demand for the years to come. Since the pioneering demonstrations of UWB transmission a few years ago, long strides have been taken toward UWB technologies. In this review article, we discuss how the most recent advances in the design and fabrication of enabling devices, such as lasers, amplifiers, optical switches, and modulators, have improved the performance of UWB systems, paving the way to turn research demonstrations into future products. In addition, we also report on the advances in UWB optical fibers, such as the recently introduced nested antiresonant nodeless fibers (NANFs), whose future implementations could potentially provide up to 300-nm-wide bandwidth at less than 0.2 dB/km loss

Novel approaches to power scaling of single-frequency photonic crystal fiber amplifiers

This dissertation presents experimental and theoretical studies of high power, single-frequency, ytterbium-doped photonic crystal fiber amplifiers. The objective of this effort is to identify issues which limit power scaling and develop novel techniques to overcome these limitations. Historically, stimulated Brillouin scattering (SBS) has been the primary obstacle in the realization of high power single-frequency fiber amplifiers. A novel acoustically tailored photonic crystal fiber design, having a reduced Brillouin gain coefficient of 1.2x10-11 m/W, is demonstrated. The fiber design is such that it may be used in conjunction with other SBS mitigation techniques, which increases the nonlinear threshold beyond the current state of the art. In the successful suppression of SBS, a new regime of single-frequency photonic crystal fiber amplifier power scaling is explored. Instabilities in the transverse mode is observed at increasing output powers. Mitigation of this effect is demonstrated experimentally. This empirical data is used as the basis for a theoretical treatment of the problem, which provides direction for future fiber amplifier designs. The culmination of this work results in the successful utilization of the acoustically tailored photonic crystal fiber in a single-frequency counter-pumped amplifier configuration, yielding close to 500 W output power and near diffraction-limited beam quality

Wavelength Tunable Monolithic InP Receivers and Switches for Optical Communication Systems

Demand for information technology continues to grow, and with it the need for continuous improvement in telecommunication infrastructure. Recent interest in coherent modulation schemes, wavelength conversion, and large scale photonic integration for feasible, cost-effective scaling of existing network infrastructure has generated an intriguing area idea in which several technologies are combined at once to create a solution more capable than any individual approach. By leveraging these technologies together, a scalable path capable of providing sustainable growth in the telecommunication field may be realized. This dissertation explores this concept by the applying principles of monolithic integration to coherent receiver and optical switch technology with the goal of improving the size, cost, and performance of existing communication components as well as drive forward the state of the art in photonic integration. To this end, a monolithic coherent receiver was developed by integrating local oscillator, mixer, and high speed detection functions together on a single chip in an architecture capable of supporting polarization multiplexing and phase shift keying modulation formats. With an integrated local oscillator, the receiver’s capability is scalable, supporting higher capacity modulation formats through the use of more advanced feedback electronics and digital signal processing.In addition, a monolithic all-optical switch was developed by integrating both wavelength conversion and wavelength filtering functions onto a single chip. The architecture is capable of high speed switching of optical signals without costly optical-electrical conversion by utilizing an array of optical-optical modulators with scalable channel capacity and a static arrayed-waveguide grating router. By integrating these functions on the same chip, costly packaging issues may be avoided, greatly reducing development and production costs.By moving an increased number of components onto single die while maintaining similar performance to discrete solutions, the coherent receiver and all-optical switch devices presented in this work advance the state of the art by improving the cost and manufacturability of optical communication devices. Even more, these technologies represent a path toward manageable growth of optical communication systems for long haul, datacenter, and short reach solutions by demonstrating scalable architectures for each application. Development of such technology is not only vital but essential for the continued growth of the telecommunications industry. The novel application of photonic integration, coherent modulation, and optical switching technologies are a viable solution to maintaining sustainable growth in the telecommunications field

Third-order Optical Nonlinearities for Integrated Microwave Photonics Applications

The field of integrated photonics aims at compressing large and environmentally-sensitive optical systems to micron-sized circuits that can be mass-produced through existing semiconductor fabrication facilities. The integration of optical components on single chips is pivotal to the realization of miniature systems with high degree of complexity. Such novel photonic chips find abundant applications in optical communication, spectroscopy and signal processing. This work concentrates on harnessing nonlinear phenomena to this avail. The first part of this dissertation discusses, both from component and system level, the development of a frequency comb source with a semiconductor mode-locked laser at its heart. New nonlinear devices for supercontinuum and second-harmonic generations are developed and their performance is assessed inside the system. Theoretical analysis of a hybrid approach with synchronously-pumped Kerr cavity is also provided. The second part of the dissertation investigates stimulated Brillouin scattering (SBS) in integrated photonics. A fully-tensorial open-source numerical tool is developed to study SBS in optical waveguides composed of crystalline materials, particularly silicon. SBS is demonstrated in an all-silicon optical platform

Observing and Modeling the Physical Layer Phenomena in Open Optical Systems for Network planning and management

L'abstract è presente nell'allegato / the abstract is in the attachmen