Advanced optical modulation and fast reconfigurable en/decoding techniques for OCDMA application

With the explosive growth of bandwidth requirement in optical fiber communication networks, optical code division multiple access (OCDMA) has witnessed tremendous achievements as one of the promising technologies for optical access networks over the past decades. In an OCDMA system, optical code processing is one of the key techniques. Rapid optical code reconfiguration can improve flexibility and security of the OCDMA system. This thesis focuses on advanced optical modulations and en/decoding techniques for applications in fast reconfigurable OCDMA systems and secure optical communications. A novel time domain spectral phase encoding (SPE) scheme which can rapidly reconfigure the optical code and is compatible with conventional spectral domain phase en/decoding by using a pair of dispersive devices and a high speed phase modulator is proposed. Based on this scheme, a novel advanced modulation technique that can simultaneously generate both the optical code and the differential-phase-shift-keying (DPSK) data using a single phase modulator is experimentally demonstrated. A symmetric time domain spectral phase encoding and decoding (SPE/SPD) scheme using a similar setup for both the transmitter and receiver is further proposed, based on which a bit-by-bit optical code scrambling and DPSK data modulation technique for secure optical communications has been successfully demonstrated. By combining optical encoding and optical steganography, a novel approach for secure transmission of time domain spectral phase encoded on-off-keying (OOK)/DPSK-OCDMA signal over public wavelength-division multiplexing (WDM) network has also been proposed and demonstrated. To enable high speed operation of the time domain SPE/SPD scheme and enhance the system security, a rapid programmable, code-length variable bit-by-bit optical code shifting technique is proposed. Based on this technique, security improvements for OOK/DPSK OCDMA systems at data rates of 10Gb/s and 40Gb/s using reconfigurable optical codes of up to 1024-chip have been achieved. Finally, a novel tunable two-dimensional coherent optical en/decoder which can simultaneously perform wavelength hopping and spectral phase encoding based on coupled micro-ring resonator is proposed and theoretically investigated. The techniques included in this thesis could be potentially used for future fast reconfigurable and secure optical code based communication systems

Security performance and protocol consideration in optical communication system with optical layer security enabled by optical coding techniques

With the fast development of communication systems, network security issues have more and more impact on daily life. It is essential to construct a high degree of optical layer security to resolve the security problem once and for all. Three different techniques which can provide optical layer security are introduced and compared. Optical chaos can be used for fast random number generation. Quantum cryptography is the most promising technique for key distribution. And the optical coding techniques can be deployed to encrypt the modulated signal in the optical layer. A mathematical equation has been derived from information theory to evaluate the information-theoretic security level of the wiretap channel in optical coding schemes. And the merits and limitation of two coherent optical coding schemes, temporal phase coding and spectral phase coding, have been analysed. The security scheme based on a reconfigurable optical coding device has been introduced, and the corresponding security protocol has been developed. By moving the encryption operation from the electronic layer to the optical layer, the modulated signals become opaque to the unauthorised users. Optical code distribution and authentication is the one of the major challenges for our proposed scheme. In our proposed protocol, both of the operations are covered and defined in detail. As a preliminary draft of the optical code security protocol, it could be a useful guidance for further research

Noise Suppression in OCDMA Networks using Nonlinear Optical Devices

Optical code division multiple access (OCDMA) is a multiplexing technique that has a number of inherent advantages that make it suitable for use in passive optical networks, such as allowing subscribers to transmit information in an asynchronous fashion over a single optical fibre. This form of multiplexing can provide a higher degree of flexibility and simplicity in comparison to other techniques. However, due to the asynchronous nature of transmission, OCDMA networks suffer from multiple access interference (MAI) and optical beat noise which severely impairs system performance. A number of solutions have been proposed to mitigate these noise sources. Increasing the optical code lengths used can reduce the level of optical beat noise, however this is generally at the expense of transmission speed and increased transmitter complexity. MAI suppression can be achieved through the use fibre-based nonlinear thresholders or optical time-gating. One problem with these solutions is the requirement of long lengths of nonlinear fibre that are susceptible to changes in environmental conditions. Therefore, this thesis focuses on the development and testing of a nonlinear optical receiver based on semiconductor devices for the suppression of noise in OCDMA systems. The nonlinear optical process of two-photon absorption (TPA) in a commercially available 1.3 micron Fabry-P´erot laser is investigated as a method for optical thresholding in an OCDMA system. It is shown that the use of a saturable absorber (SA) directly before the TPA-based detector can provide additional suppression of MAI noise. However, the level of beat noise that is present on the optical signal can be increased due to the nonlinear responses of both devices. As a result, a gain-saturated semiconductor optical amplifier (SOA) is demonstrated as a method for the reduction of optical beat noise. It is shown that error-free performance can be achieved in an optical testbed designed to simulate an OCDMA system using an SA-SOA-TPA-based receiver. The performance improvement due to the suppression of MAI and beat noise using an SA-SOA receiver is examined in relation to a current fibre-based thresholding technique; a Mamyshev filter. It is shown that the SA-SOA receiver can offer a similar level of improvement when compared to the performance of a Mamyshev filter

Performance improvement of SS-WDM passive optical networks using semiconductor optical amplifiers: Modeling and experiment

Les sources incohérentes sont proposées comme alternatives aux lasers stabilisés en longueur d'onde pour réduire le coût des réseaux optiques passifs utilisant le multiplexage par longueur d'onde découpée dans le spectre (SS-WDM PONs). À cause de leur nature incohérente, ces sources génèrent au récepteur un large bruit d'intensité. Ce bruit limite l'efficacité spectrale et/ou le taux binaire pouvant être achevé. Cette thèse étudie l'utilisation des amplificateurs optique à semi-conducteur SOAs pour nettoyer le bruit d'intensité. De plus, lors de cette thèse, nous explorons les outils numériques et expérimentaux qui nous permettent d'analyser les performances des SOAs dans le cadre de systèmes de communication multi-canaux, incluant le SS-WDM. Nous présentons des modèles mathématiques pour le bruit d'intensité, ce bruit étant celui qui limite les performances des systèmes de communication utilisant des sources incohérentes. Nous discutons les dynamiques complexes des SOAs et présentons les équations qui gouvernent l'évolution des porteurs de charges dans ces amplificateurs. Nous identifions et soulignons l'effet des paramètres les plus importants, qui affectent le processus ainsi que la dynamique de nettoyage du bruit d'intensité. Nous passons en revue, les différentes techniques de nettoyage de bruit avec les SOAs, qui ont démontré les meilleurs résultats connus. De plus, nous effectuons une revue de littérature poussée pour ce qui a attrait au problème de post-filtrage lorsque le SOA est placé au transmetteur, avant la modulation. Notre première contribution pendant ce travail de recherche est de démontrer, en utilisant l'intermodulation de gain d'un SOA au récepteur pour convertir le signal incohérent en laser cohérent, une amélioration significative du taux d'erreur binaire BER. Cette méthode est spectralement efficace, d'autant plus qu'elle ne souffre point la limitation occasionnée par le post-filtrage au récepteur. En contre partie elle nécessite un ample budget de puissance qui doit assurer une saturation suffisante de l'amplificateur au récepteur. Une source laser est aussi nécessaire au récepteur. Ceci est un inconvénient, même si une telle source n'ait pas besoin d'une quelconque stabilisation. Pour contourner le problème causé par le post-filtrage quand le SOA est au transmetteur, nous proposons un nouveau récepteur pour les systèmes de communication WDM, qui permet de mieux garder le nettoyage de bruit, et ce malgré le filtrage optique au récepteur. La nouvelle méthode consiste en un détecteur balancé utilisé au récepteur: d'un bord, tous les canaux sont détectés sans distinction. De l'autre, le signal désiré est bloqué pendant que tous les autres canaux sont détectés. Avec cette méthode, il est facile de saturer l'amplificateur pour une meilleure suppression de bruit tout en évitant en grande partie la dégradation causé par le post-filtrage. Nous avons expérimentalement démontré un système WDM dense de 8 x 10 Gbps avec une source incohérente et un SOA en saturation. Une autre contribution originale de ce travail est le développement d'un outil de simulation pour les SOAs qui est numériquement plus efficace et léger que les modèles connus à ce jour. Nous avons donc développé un modèle théorique simple, pouvant être implémenté par diagramme block, dans le but de simuler les performances des hens de communications WDM. Notre modèle démontre une bonne concordance avec les résultats expérimentaux ainsi qu'une diminution de temps de calcul de l'ordre de 20 fois. Finalement, lors de la dernière partie de ces travaux, nous nous sommes occupés de mesurer, de façon précise, le temps de recouvrement du gain dans un SOA. Le temps de recouvrement des porteurs dans un SOA est un des paramètres les plus importants qui sont à l'origine du phénomène de nettoyage de bruit et qui régissent le comportement ainsi que les dynamiques de l'amplificateur. Nous avons étudié en particulier, la dépendance de ce temps de recouvrement r de la longueur d'onde. Pour le SOA utilisé lors de notre étude expérimentale, nous avons démontré que r dépendait de la longueur d'onde de façon similaire au spectre de gain. Ces mesures ont été possibles grâce au développement d'un nouveau dispositif de mesure pompe/sonde, qui permettait de mesurer le recouvrement du gain pour une pompe et une sonde à la même longueur d'onde et ayant le même état de polarisation

Real-time imaging systems for superconducting nanowire single-photon detector arrays

Superconducting nanowire singe-photon detectors (SNSPD) are promising detectors in the field of applications, where single-photon resolution is required like in quantum optics, spectroscopy or astronomy. These cryogenic detectors gain from a broad spectrum in the optical and infrared range and deliver low dark count rates and low jitter times. This thesis improves the understanding of the detection mechanism of SNSPDs and intodruces new and promising multi-pixel readout concepts

Ultra Wideband

Ultra wideband (UWB) has advanced and merged as a technology, and many more people are aware of the potential for this exciting technology. The current UWB field is changing rapidly with new techniques and ideas where several issues are involved in developing the systems. Among UWB system design, the UWB RF transceiver and UWB antenna are the key components. Recently, a considerable amount of researches has been devoted to the development of the UWB RF transceiver and antenna for its enabling high data transmission rates and low power consumption. Our book attempts to present current and emerging trends in-research and development of UWB systems as well as future expectations

Optical Communication

Optical communication is very much useful in telecommunication systems, data processing and networking. It consists of a transmitter that encodes a message into an optical signal, a channel that carries the signal to its desired destination, and a receiver that reproduces the message from the received optical signal. It presents up to date results on communication systems, along with the explanations of their relevance, from leading researchers in this field. The chapters cover general concepts of optical communication, components, systems, networks, signal processing and MIMO systems. In recent years, optical components and other enhanced signal processing functions are also considered in depth for optical communications systems. The researcher has also concentrated on optical devices, networking, signal processing, and MIMO systems and other enhanced functions for optical communication. This book is targeted at research, development and design engineers from the teams in manufacturing industry, academia and telecommunication industries

Proceedings of the Second International Mobile Satellite Conference (IMSC 1990)

Presented here are the proceedings of the Second International Mobile Satellite Conference (IMSC), held June 17-20, 1990 in Ottawa, Canada. Topics covered include future mobile satellite communications concepts, aeronautical applications, modulation and coding, propagation and experimental systems, mobile terminal equipment, network architecture and control, regulatory and policy considerations, vehicle antennas, and speech compression