33,560 research outputs found
Characterisation of periodically poled materials using nonlinear microscopy
Periodically poled crystalline materials are extremely attractive for processes such as second harmonic generation and optical parametric generation due to their very high conversion efficiency. For optimal performance, fabrication of poled regions with sub-micron tolerance is required. In this paper we introduce multi-photon laser scanning luminescence microscopy as a powerful minimally-invasive measurement technique which provides information about internal device structure with high spatial resolution that cannot be easily obtained with existing methods. A comparative study of confocal and multi-photon imaging of periodically poled crystalline materials is also performed
Temporal phase unwrapping using deep learning
The multi-frequency temporal phase unwrapping (MF-TPU) method, as a classical
phase unwrapping algorithm for fringe projection profilometry (FPP), is capable
of eliminating the phase ambiguities even in the presence of surface
discontinuities or spatially isolated objects. For the simplest and most
efficient case, two sets of 3-step phase-shifting fringe patterns are used: the
high-frequency one is for 3D measurement and the unit-frequency one is for
unwrapping the phase obtained from the high-frequency pattern set. The final
measurement precision or sensitivity is determined by the number of fringes
used within the high-frequency pattern, under the precondition that the phase
can be successfully unwrapped without triggering the fringe order error.
Consequently, in order to guarantee a reasonable unwrapping success rate, the
fringe number (or period number) of the high-frequency fringe patterns is
generally restricted to about 16, resulting in limited measurement accuracy. On
the other hand, using additional intermediate sets of fringe patterns can
unwrap the phase with higher frequency, but at the expense of a prolonged
pattern sequence. Inspired by recent successes of deep learning techniques for
computer vision and computational imaging, in this work, we report that the
deep neural networks can learn to perform TPU after appropriate training, as
called deep-learning based temporal phase unwrapping (DL-TPU), which can
substantially improve the unwrapping reliability compared with MF-TPU even in
the presence of different types of error sources, e.g., intensity noise, low
fringe modulation, and projector nonlinearity. We further experimentally
demonstrate for the first time, to our knowledge, that the high-frequency phase
obtained from 64-period 3-step phase-shifting fringe patterns can be directly
and reliably unwrapped from one unit-frequency phase using DL-TPU
Optical techniques for 3D surface reconstruction in computer-assisted laparoscopic surgery
One of the main challenges for computer-assisted surgery (CAS) is to determine the intra-opera- tive morphology and motion of soft-tissues. This information is prerequisite to the registration of multi-modal patient-specific data for enhancing the surgeon’s navigation capabilites by observ- ing beyond exposed tissue surfaces and for providing intelligent control of robotic-assisted in- struments. In minimally invasive surgery (MIS), optical techniques are an increasingly attractive approach for in vivo 3D reconstruction of the soft-tissue surface geometry. This paper reviews the state-of-the-art methods for optical intra-operative 3D reconstruction in laparoscopic surgery and discusses the technical challenges and future perspectives towards clinical translation. With the recent paradigm shift of surgical practice towards MIS and new developments in 3D opti- cal imaging, this is a timely discussion about technologies that could facilitate complex CAS procedures in dynamic and deformable anatomical regions
Micro Fourier Transform Profilometry (FTP): 3D shape measurement at 10,000 frames per second
Recent advances in imaging sensors and digital light projection technology
have facilitated a rapid progress in 3D optical sensing, enabling 3D surfaces
of complex-shaped objects to be captured with improved resolution and accuracy.
However, due to the large number of projection patterns required for phase
recovery and disambiguation, the maximum fame rates of current 3D shape
measurement techniques are still limited to the range of hundreds of frames per
second (fps). Here, we demonstrate a new 3D dynamic imaging technique, Micro
Fourier Transform Profilometry (FTP), which can capture 3D surfaces of
transient events at up to 10,000 fps based on our newly developed high-speed
fringe projection system. Compared with existing techniques, FTP has the
prominent advantage of recovering an accurate, unambiguous, and dense 3D point
cloud with only two projected patterns. Furthermore, the phase information is
encoded within a single high-frequency fringe image, thereby allowing
motion-artifact-free reconstruction of transient events with temporal
resolution of 50 microseconds. To show FTP's broad utility, we use it to
reconstruct 3D videos of 4 transient scenes: vibrating cantilevers, rotating
fan blades, bullet fired from a toy gun, and balloon's explosion triggered by a
flying dart, which were previously difficult or even unable to be captured with
conventional approaches.Comment: This manuscript was originally submitted on 30th January 1
Three-dimensional fluorescent microscopy via simultaneous illumination and detection at multiple planes.
The conventional optical microscope is an inherently two-dimensional (2D) imaging tool. The objective lens, eyepiece and image sensor are all designed to capture light emitted from a 2D 'object plane'. Existing technologies, such as confocal or light sheet fluorescence microscopy have to utilize mechanical scanning, a time-multiplexing process, to capture a 3D image. In this paper, we present a 3D optical microscopy method based upon simultaneously illuminating and detecting multiple focal planes. This is implemented by adding two diffractive optical elements to modify the illumination and detection optics. We demonstrate that the image quality of this technique is comparable to conventional light sheet fluorescent microscopy with the advantage of the simultaneous imaging of multiple axial planes and reduced number of scans required to image the whole sample volume
Attosecond Streaking in the Water Window: A New Regime of Attosecond Pulse Characterization
We report on the first streaking measurement of water-window attosecond
pulses generated via high harmonic generation, driven by sub-2-cycle,
CEP-stable, 1850 nm laser pulses. Both the central photon energy and the energy
bandwidth far exceed what has been demonstrated thus far, warranting the
investigation of the attosecond streaking technique for the soft X-ray regime
and the limits of the FROGCRAB retrieval algorithm under such conditions. We
also discuss the problem of attochirp compensation and issues regarding much
lower photo-ionization cross sections compared with the XUV in addition to the
fact that several shells of target gases are accessed simultaneously. Based on
our investigation, we caution that the vastly different conditions in the soft
X-ray regime warrant a diligent examination of the fidelity of the measurement
and the retrieval procedure.Comment: 14 Pages, 12 figure
Tackling 3D ToF Artifacts Through Learning and the FLAT Dataset
Scene motion, multiple reflections, and sensor noise introduce artifacts in
the depth reconstruction performed by time-of-flight cameras. We propose a
two-stage, deep-learning approach to address all of these sources of artifacts
simultaneously. We also introduce FLAT, a synthetic dataset of 2000 ToF
measurements that capture all of these nonidealities, and allows to simulate
different camera hardware. Using the Kinect 2 camera as a baseline, we show
improved reconstruction errors over state-of-the-art methods, on both simulated
and real data.Comment: ECCV 201
- …