Power efficient approaches to redundant multithreading

Journal ArticleNoise and radiation-induced soft errors (transient faults) in computer systems have increased significantly over the last few years and are expected to increase even more as we move toward smaller transistor sizes and lower supply voltages. Fault detection and recovery can be achieved through redundancy. The emergence of chip multiprocessors (CMPs) makes it possible to execute redundant threads on a chip and provide relatively low-cost reliability. State-of-the-art implementations execute two copies of the same program as two threads (redundant multithreading), either on the same or on separate processor cores in a CMP, and periodically check results. Although this solution has favorable performance and reliability properties, every redundant instruction flows through a high-frequency complex out-of-order pipeline, thereby incurring a high power consumption penalty. This paper proposes mechanisms that attempt to provide reliability at a modest power and complexity cost. When executing a redundant thread, the trailing thread benefits from the information produced by the leading thread. We take advantage of this property and comprehensively study different strategies to reduce the power overhead of the trailing core in a CMP. These strategies include dynamic frequency scaling, in-order execution, and parallelization of the trailing thread

Harnessing Checker Hierarchy for Reliable Microprocessors

Traditional fault-tolerant multi-threading architectures provide good fault tolerance by re-executing all the computations. However, such a full re-execution significantly increases the demand on the processor resources, resulting in severe performance degradation. To address this problem, this dissertation presents Active Verification Management (AVM) approaches that utilize a checker hierarchy to increase its performance with a minimal effect on the overall reliability. Based on a simplified queueing model, AVM employs a filter checker which prioritizes the verification candidates to selectively do verification. This dissertation proposes three filter checkers - based on (1) result usage, (2) result bitwidth, and (3) result anomaly - that exploit correctness-criticality metrics and anomaly speculation. Binary Correctness Criticality (BCC) and Likelihood of Correctness Criticality (LoCC) are metrics that quantify whether an instruction is important for reliability or how likely an instruction is correctness-critical, respectively. Based on the BCC, a result-usage-based filter checker mitigates the verification workload by bypassing instructions that are unnecessary for correct execution. Computing the LoCC is accomplished by exploiting information redundancy of compressing computationally useful data bits. Numerical significance hints let the result-bitwidth-based filter checker guide a verification priority effectively before the re-execution process starts. A result-anomaly-based filter checker exploits a value similarity property, which is defined by a frequent occurrence of partially identical values. Based on the biased distribution of similarity distance measure, this dissertation further investigates another application to exploit similar values for soft error tolerance with anomaly speculation. Extensive measurements show that the majority of instructions produce values that are different from the previous result value only in a few bits. Experimental results show that the proposed schemes accelerate the processor to be 180% faster than traditional fully-fault-tolerant processor, with a minimal impact on the overall soft error rate. With no AVM, congestion at the checker badly affects performance, to the tune of 57%, when compared to that of a non-fault-tolerant processor. These results explain that the proposed AVM has the potential to solve the verification congestion problem when perfect fault coverage is not needed

Classification of Resilience Techniques Against Functional Errors at Higher Abstraction Layers of Digital Systems

Nanoscale technology nodes bring reliability concerns back to the center stage of digital system design. A systematic classification of approaches that increase system resilience in the presence of functional hardware (HW)-induced errors is presented, dealing with higher system abstractions, such as the (micro) architecture, the mapping, and platform software (SW). The field is surveyed in a systematic way based on nonoverlapping categories, which add insight into the ongoing work by exposing similarities and differences. HW and SW solutions are discussed in a similar fashion so that interrelationships become apparent. The presented categories are illustrated by representative literature examples to illustrate their properties. Moreover, it is demonstrated how hybrid schemes can be decomposed into their primitive components

Predictive Reliability and Fault Management in Exascale Systems: State of the Art and Perspectives

© ACM, 2020. This is the author's version of the work. It is posted here by permission of ACM for your personal use. Not for redistribution. The definitive version was published in ACM Computing Surveys, Vol. 53, No. 5, Article 95. Publication date: September 2020. https://doi.org/10.1145/3403956[EN] Performance and power constraints come together with Complementary Metal Oxide Semiconductor technology scaling in future Exascale systems. Technology scaling makes each individual transistor more prone to faults and, due to the exponential increase in the number of devices per chip, to higher system fault rates. Consequently, High-performance Computing (HPC) systems need to integrate prediction, detection, and recovery mechanisms to cope with faults efficiently. This article reviews fault detection, fault prediction, and recovery techniques in HPC systems, from electronics to system level. We analyze their strengths and limitations. Finally, we identify the promising paths to meet the reliability levels of Exascale systems.This work has received funding from the European Union's Horizon 2020 (H2020) research and innovation program under the FET-HPC Grant Agreement No. 801137 (RECIPE). Jaume Abella was also partially supported by the Ministry of Economy and Competitiveness of Spain under Contract No. TIN2015-65316-P and under Ramon y Cajal Postdoctoral Fellowship No. RYC-2013-14717, as well as by the HiPEAC Network of Excellence. Ramon Canal is partially supported by the Generalitat de Catalunya under Contract No. 2017SGR0962.Canal, R.; Hernández Luz, C.; Tornero-Gavilá, R.; Cilardo, A.; Massari, G.; Reghenzani, F.; Fornaciari, W.... (2020). Predictive Reliability and Fault Management in Exascale Systems: State of the Art and Perspectives. ACM Computing Surveys. 53(5):1-32. https://doi.org/10.1145/3403956S132535Abella, J., Hernandez, C., Quinones, E., Cazorla, F. J., Conmy, P. R., Azkarate-askasua, M., … Vardanega, T. (2015). WCET analysis methods: Pitfalls and challenges on their trustworthiness. 10th IEEE International Symposium on Industrial Embedded Systems (SIES). doi:10.1109/sies.2015.7185039E. Agullo L. Giraud A. Guermouche J. Roman and M. Zounon. 2013. Towards resilient parallel linear Krylov solvers: Recover-restart strategies. INRIA Research Report RR-8324. E. Agullo L. Giraud A. Guermouche J. Roman and M. Zounon. 2013. Towards resilient parallel linear Krylov solvers: Recover-restart strategies. INRIA Research Report RR-8324.Agullo, E., Giraud, L., Salas, P., & Zounon, M. (2016). Interpolation-Restart Strategies for Resilient Eigensolvers. SIAM Journal on Scientific Computing, 38(5), C560-C583. doi:10.1137/15m1042115Al-Qawasmeh, A. M., Pasricha, S., Maciejewski, A. A., & Siegel, H. J. (2015). Power and Thermal-Aware Workload Allocation in Heterogeneous Data Centers. IEEE Transactions on Computers, 64(2), 477-491. doi:10.1109/tc.2013.116ARM. 2017. ARM Reliability Availability and Serviceability (RAS) Specification—ARMv8 for the ARMv8-A Architecture Profile. White paper. Retrieved from https://developer.arm.com/docs/ddi0587/latest. ARM. 2017. ARM Reliability Availability and Serviceability (RAS) Specification—ARMv8 for the ARMv8-A Architecture Profile. White paper. Retrieved from https://developer.arm.com/docs/ddi0587/latest.Avizienis, A., Laprie, J.-C., Randell, B., & Landwehr, C. (2004). Basic concepts and taxonomy of dependable and secure computing. IEEE Transactions on Dependable and Secure Computing, 1(1), 11-33. doi:10.1109/tdsc.2004.2Bautista-Gomez, L., Zyulkyarov, F., Unsal, O., & McIntosh-Smith, S. (2016). Unprotected Computing: A Large-Scale Study of DRAM Raw Error Rate on a Supercomputer. SC16: International Conference for High Performance Computing, Networking, Storage and Analysis. doi:10.1109/sc.2016.54Berrocal, E., Bautista-Gomez, L., Di, S., Lan, Z., & Cappello, F. (2017). Toward General Software Level Silent Data Corruption Detection for Parallel Applications. IEEE Transactions on Parallel and Distributed Systems, 28(12), 3642-3655. doi:10.1109/tpds.2017.2735971M.-A. Breuer and A. D. Friedman. 1976. Diagnosis 8 Reliable Design of Digital Systems. Springer. M.-A. Breuer and A. D. Friedman. 1976. Diagnosis 8 Reliable Design of Digital Systems. Springer.P. Bridges K. Ferreira M. Heroux and M. Hoemmen. 2012. Fault-tolerant linear solvers via selective reliability. ArXiv e-prints June 2012. arXiv:1206.1390 [math.NA]. P. Bridges K. Ferreira M. Heroux and M. Hoemmen. 2012. Fault-tolerant linear solvers via selective reliability. ArXiv e-prints June 2012. arXiv:1206.1390 [math.NA].F. Cappello A. Geist W. Gropp S. Kale B. Kramer and M. Snir. 2014. Toward exascale resilience: 2014 update. Supercomput. Front. Innovat. 1 1 (2014). http://superfri.org/superfri/article/view/14. F. Cappello A. Geist W. Gropp S. Kale B. Kramer and M. Snir. 2014. Toward exascale resilience: 2014 update. Supercomput. Front. Innovat. 1 1 (2014). http://superfri.org/superfri/article/view/14.F. J. Cazorla L. Kosmidis E. Mezzetti C. Hernandez J. Abella and T. Vardanega. 2019. Probabilistic worst-case timing analysis: Taxonomy and comprehensive survey. ACM Comput. Surv. 52 1 Article 14 (Feb. 2019) 35 pages. DOI:https://doi.org/10.1145/3301283 F. J. Cazorla L. Kosmidis E. Mezzetti C. Hernandez J. Abella and T. Vardanega. 2019. Probabilistic worst-case timing analysis: Taxonomy and comprehensive survey. ACM Comput. Surv. 52 1 Article 14 (Feb. 2019) 35 pages. DOI:https://doi.org/10.1145/3301283Chan, C. S., Pan, B., Gross, K., Vaidyanathan, K., & Rosing, T. Š. (2014). Correcting vibration-induced performance degradation in enterprise servers. ACM SIGMETRICS Performance Evaluation Review, 41(3), 83-88. doi:10.1145/2567529.2567555Chantem, T., Hu, X. S., & Dick, R. P. (2011). Temperature-Aware Scheduling and Assignment for Hard Real-Time Applications on MPSoCs. IEEE Transactions on Very Large Scale Integration (VLSI) Systems, 19(10), 1884-1897. doi:10.1109/tvlsi.2010.2058873Chen, M. Y., Kiciman, E., Fratkin, E., Fox, A., & Brewer, E. (s. f.). Pinpoint: problem determination in large, dynamic Internet services. Proceedings International Conference on Dependable Systems and Networks. doi:10.1109/dsn.2002.1029005Chen, Z. (2011). Algorithm-based recovery for iterative methods without checkpointing. Proceedings of the 20th international symposium on High performance distributed computing - HPDC ’11. doi:10.1145/1996130.1996142Chen, Z. (2013). Online-ABFT. Proceedings of the 18th ACM SIGPLAN symposium on Principles and practice of parallel programming - PPoPP ’13. doi:10.1145/2442516.2442533Coskun, A. K., Rosing, T. S., Mihic, K., De Micheli, G., & Leblebici, Y. (2006). Analysis and Optimization of MPSoC Reliability. Journal of Low Power Electronics, 2(1), 56-69. doi:10.1166/jolpe.2006.007G. Da Costa A. Oleksiak W. Piatek J. Salom and L. Sisó. 2015. Minimization of costs and energy consumption in a data center by a workload-based capacity management. In Energy Efficient Data Centers S. Klingert M. Chinnici and M. Rey Porto (Eds.). Springer International Publishing Cham 102--119. G. Da Costa A. Oleksiak W. Piatek J. Salom and L. Sisó. 2015. Minimization of costs and energy consumption in a data center by a workload-based capacity management. In Energy Efficient Data Centers S. Klingert M. Chinnici and M. Rey Porto (Eds.). Springer International Publishing Cham 102--119.Cupertino, L., Da Costa, G., Oleksiak, A., Pia¸tek, W., Pierson, J.-M., Salom, J., … Zilio, T. (2015). Energy-efficient, thermal-aware modeling and simulation of data centers: The CoolEmAll approach and evaluation results. Ad Hoc Networks, 25, 535-553. doi:10.1016/j.adhoc.2014.11.002Dally, W. J. (1991). Express cubes: improving the performance of k-ary n-cube interconnection networks. IEEE Transactions on Computers, 40(9), 1016-1023. doi:10.1109/12.83652Dauwe, D., Pasricha, S., Maciejewski, A. A., & Siegel, H. J. (2018). Resilience-Aware Resource Management for Exascale Computing Systems. IEEE Transactions on Sustainable Computing, 3(4), 332-345. doi:10.1109/tsusc.2018.2797890R. I. Davis and A. Burns. 2011. A survey of hard real-time scheduling for multiprocessor systems. ACM Comput. Surv. 43 4 Article 35 (Oct. 2011) 44 pages. DOI:https://doi.org/10.1145/1978802.1978814 R. I. Davis and A. Burns. 2011. A survey of hard real-time scheduling for multiprocessor systems. ACM Comput. Surv. 43 4 Article 35 (Oct. 2011) 44 pages. DOI:https://doi.org/10.1145/1978802.1978814Di, S., & Cappello, F. (2016). Adaptive Impact-Driven Detection of Silent Data Corruption for HPC Applications. IEEE Transactions on Parallel and Distributed Systems, 27(10), 2809-2823. doi:10.1109/tpds.2016.2517639Di, S., Guo, H., Gupta, R., Pershey, E. R., Snir, M., & Cappello, F. (2019). Exploring Properties and Correlations of Fatal Events in a Large-Scale HPC System. IEEE Transactions on Parallel and Distributed Systems, 30(2), 361-374. doi:10.1109/tpds.2018.2864184Di, S., Robert, Y., Vivien, F., & Cappello, F. (2017). Toward an Optimal Online Checkpoint Solution under a Two-Level HPC Checkpoint Model. IEEE Transactions on Parallel and Distributed Systems, 28(1), 244-259. doi:10.1109/tpds.2016.2546248J. Dongarra T. Herault and Y. Robert. 2015. Fault Tolerance Techniques for High-Performance Computing. Springer. J. Dongarra T. Herault and Y. Robert. 2015. Fault Tolerance Techniques for High-Performance Computing. Springer.DOWNING, S., & SOCIE, D. (1982). Simple rainflow counting algorithms. International Journal of Fatigue, 4(1), 31-40. doi:10.1016/0142-1123(82)90018-4Eghbalkhah, B., Kamal, M., Afzali-Kusha, H., Afzali-Kusha, A., Ghaznavi-Ghoushchi, M. B., & Pedram, M. (2015). Workload and temperature dependent evaluation of BTI-induced lifetime degradation in digital circuits. Microelectronics Reliability, 55(8), 1152-1162. doi:10.1016/j.microrel.2015.06.004Gottscho, M., Shoaib, M., Govindan, S., Sharma, B., Wang, D., & Gupta, P. (2017). Measuring the Impact of Memory Errors on Application  Performance. IEEE Computer Architecture Letters, 16(1), 51-55. doi:10.1109/lca.2016.2599513Greenberg, A., Hamilton, J. R., Jain, N., Kandula, S., Kim, C., Lahiri, P., … Sengupta, S. (2011). VL2. Communications of the ACM, 54(3), 95-104. doi:10.1145/1897852.1897877Heroux, M. A., Bartlett, R. A., Howle, V. E., Hoekstra, R. J., Hu, J. J., Kolda, T. G., … Stanley, K. S. (2005). An overview of the Trilinos project. ACM Transactions on Mathematical Software, 31(3), 397-423. doi:10.1145/1089014.1089021Hoffmann, G. A., Trivedi, K. S., & Malek, M. (2007). A Best Practice Guide to Resource Forecasting for Computing Systems. IEEE Transactions on Reliability, 56(4), 615-628. doi:10.1109/tr.2007.909764Hsiao, M. Y., Carter, W. C., Thomas, J. W., & Stringfellow, W. R. (1981). Reliability, Availability, and Serviceability of IBM Computer Systems: A Quarter Century of Progress. IBM Journal of Research and Development, 25(5), 453-468. doi:10.1147/rd.255.0453Hughes, G. F., Murray, J. F., Kreutz-Delgado, K., & Elkan, C. (2002). Improved disk-drive failure warnings. IEEE Transactions on Reliability, 51(3), 350-357. doi:10.1109/tr.2002.802886S. Hukerikar and C. Engelmann. 2017. Resilience design patterns: A structured approach to resilience at extreme scale. Supercomput. Front. Innov. 4 3 (2017). DOI:https://doi.org/10.14529/jsfi170301 S. Hukerikar and C. Engelmann. 2017. Resilience design patterns: A structured approach to resilience at extreme scale. Supercomput. Front. Innov. 4 3 (2017). DOI:https://doi.org/10.14529/jsfi170301Hussain, H., Malik, S. U. R., Hameed, A., Khan, S. U., Bickler, G., Min-Allah, N., … Rayes, A. (2013). A survey on resource allocation in high performance distributed computing systems. Parallel Computing, 39(11), 709-736. doi:10.1016/j.parco.2013.09.009Intel Corporation. [n.d.]. Intel Xeon Processor E7 Family: Reliability Availability and Serviceability. White paper. https://www.intel.com/content/www/us/en/processors/xeon/xeon-e7-family-ras-server-paper.html. Intel Corporation. [n.d.]. Intel Xeon Processor E7 Family: Reliability Availability and Serviceability. White paper. https://www.intel.com/content/www/us/en/processors/xeon/xeon-e7-family-ras-server-paper.html.Jha, S., Formicola, V., Martino, C. D., Dalton, M., Kramer, W. T., Kalbarczyk, Z., & Iyer, R. K. (2018). Resiliency of HPC Interconnects: A Case Study of Interconnect Failures and Recovery in Blue Waters. IEEE Transactions on Dependable and Secure Computing, 15(6), 915-930. doi:10.1109/tdsc.2017.2737537Kiciman, E., & Fox, A. (2005). Detecting Application-Level Failures in Component-Based Internet Services. IEEE Transactions on Neural Networks, 16(5), 1027-1041. doi:10.1109/tnn.2005.853411Kim, T., Sun, Z., Cook, C., Zhao, H., Li, R., Wong, D., & Tan, S. X.-D. (2016). Invited - Cross-layer modeling and optimization for electromigration induced reliability. Proceedings of the 53rd Annual Design Automation Conference. doi:10.1145/2897937.2905010Kurowski, K., Oleksiak, A., Piątek, W., Piontek, T., Przybyszewski, A., & Węglarz, J. (2013). DCworms – A tool for simulation of energy efficiency in distributed computing infrastructures. Simulation Modelling Practice and Theory, 39, 135-151. doi:10.1016/j.simpat.2013.08.007Langou, J., Chen, Z., Bosilca, G., & Dongarra, J. (2008). Recovery Patterns for Iterative Methods in a Parallel Unstable Environment. SIAM Journal on Scientific Computing, 30(1), 102-116. doi:10.1137/040620394J. C. Laprie (Ed.). 1995. Dependability—Its Attributes Impairments and Means. Springer-Verlag Berlin. J. C. Laprie (Ed.). 1995. Dependability—Its Attributes Impairments and Means. Springer-Verlag Berlin.Laprie, J.-C. (s. f.). DEPENDABLE COMPUTING AND FAULT TOLERANCE : CONCEPTS AND TERMINOLOGY. Twenty-Fifth International Symposium on Fault-Tolerant Computing, 1995, ’ Highlights from Twenty-Five Years’. doi:10.1109/ftcsh.1995.532603Lasance, C. J. M. (2003). Thermally driven reliability issues in microelectronic systems: status-quo and challenges. Microelectronics Reliability, 43(12), 1969-1974. doi:10.1016/s0026-2714(03)00183-5Yinglung Liang, Yanyong Zhang, Sivasubramaniam, A., Jette, M., & Sahoo, R. (s. f.). BlueGene/L Failure Analysis and Prediction Models. International Conference on Dependable Systems and Networks (DSN’06). doi:10.1109/dsn.2006.18Lin, T.-T. Y., & Siewiorek, D. P. (1990). Error log analysis: statistical modeling and heuristic trend analysis. IEEE Transactions on Reliability, 39(4), 419-432. doi:10.1109/24.58720Losada, N., González, P., Martín, M. J., Bosilca, G., Bouteiller, A., & Teranishi, K. (2020). Fault tolerance of MPI applications in exascale systems: The ULFM solution. Future Generation Computer Systems, 106, 467-481. doi:10.1016/j.future.2020.01.026Lyons, R. E., & Vanderkulk, W. (1962). The Use of Triple-Modular Redundancy to Improve Computer Reliability. IBM Journal of Research and Development, 6(2), 200-209. doi:10.1147/rd.62.0200M. Médard and S. S. Lumetta. 2003. Network Reliability and Fault Tolerance. American Cancer Society. Retrieved from arXiv:https://onlinelibrary.wiley.com/doi/pdf/10.1002/0471219282.eot281. M. Médard and S. S. Lumetta. 2003. Network Reliability and Fault Tolerance. American Cancer Society. Retrieved from arXiv:https://onlinelibrary.wiley.com/doi/pdf/10.1002/0471219282.eot281.Moody, A., Bronevetsky, G., Mohror, K., & de Supinski, B. (2010). Detailed Modeling, Design, and Evaluation of a Scalable Multi-level Checkpointing System. doi:10.2172/984082Moor Insights 8 Strategy. 2017. AMD EPYC Brings New RAS Capability. White paper. Retrieved from https://www.amd.com/system/files/2017-06/AMD-EPYC-Brings-New-RAS-Capability.pdf. Moor Insights 8 Strategy. 2017. AMD EPYC Brings New RAS Capability. White paper. Retrieved from https://www.amd.com/system/files/2017-06/AMD-EPYC-Brings-New-RAS-Capability.pdf.Mulas, F., Atienza, D., Acquaviva, A., Carta, S., Benini, L., & De Micheli, G. (2009). Thermal Balancing Policy for Multiprocessor Stream Computing Platforms. IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems, 28(12), 1870-1882. doi:10.1109/tcad.2009.2032372Oleksiak, A., Kierzynka, M., Piatek, W., Agosta, G., Barenghi, A., Brandolese, C., … Janssen, U. (2017). M2DC – Modular Microserver DataCentre with heterogeneous hardware. Microprocessors and Microsystems, 52, 117-130. doi:10.1016/j.micpro.2017.05.019Oxley, M. A., Jonardi, E., Pasricha, S., Maciejewski, A. A., Siegel, H. J., Burns, P. J., & Koenig, G. A. (2018). Rate-based thermal, power, and co-location aware resource management for heterogeneous data centers. Journal of Parallel and Distributed Computing, 112, 126-139. doi:10.1016/j.jpdc.2017.04.015K. O’brien I. Pietri R. Reddy A. Lastovetsky and R. Sakellariou. 2017. A survey of power and energy predictive models in HPC systems and applications. ACM Comput. Surv. 50 3 Article 37 (June 2017) 38 pages. DOI:https://doi.org/10.1145/3078811 K. O’brien I. Pietri R. Reddy A. Lastovetsky and R. Sakellariou. 2017. A survey of power and energy predictive models in HPC systems and applications. ACM Comput. Surv. 50 3 Article 37 (June 2017) 38 pages. DOI:https://doi.org/10.1145/3078811Park, S.-M., & Humphrey, M. (2011). Predictable High-Performance Computing Using Feedback Control and Admission Control. IEEE Transactions on Parallel and Distributed Systems, 22(3), 396-411. doi:10.1109/tpds.2010.100Pfefferman, J. D., & Cernuschi-Frias, B. (2002). A nonparametric nonstationary procedure for failure prediction. IEEE Transactions on Reliability, 51(4), 434-442. doi:10.1109/tr.2002.804733Rangan, K. K., Wei, G.-Y., & Brooks, D. (2009). Thread motion. ACM SIGARCH Computer Architecture News, 37(3), 302-313. doi:10.1145/1555815.1555793Paolo Rech. [n.d.]. Reliability Issues in Current and Future Supercomputers. Retrieved from http://energysfe.ufsc.br/slides/Paolo-Rech-260917.pdf. Paolo Rech. [n.d.]. Reliability Issues in Current and Future Supercomputers. Retrieved from http://energysfe.ufsc.br/slides/Paolo-Rech-260917.pdf.F. Reghenzani G. Massari and W. Fornaciari. 2019. The real-time Linux kernel: A survey on PREEMPT_RT. Comput. Surveys 52 1 Article 18 (Feb. 2019) 36 pages. DOI:https://doi.org/10.1145/3297714 F. Reghenzani G. Massari and W. Fornaciari. 2019. The real-time Linux kernel: A survey on PREEMPT_RT. Comput. Surveys 52 1 Article 18 (Feb. 2019) 36 pages. DOI:https://doi.org/10.1145/3297714F. Salfner M. Lenk and M. Malek. 2010. A survey of online failure prediction methods. ACM Comput. Surv. 42 3 Article 10 (March 2010) 42 pages. DOI:https://doi.org/10.1145/1670679.1670680 F. Salfner M. Lenk and M. Malek. 2010. A survey of online failure prediction methods. ACM Comput. Surv. 42 3 Article 10 (March 2010) 42 pages. DOI:https://doi.org/10.1145/1670679.1670680Salfner, F., Schieschke, M., & Malek, M. (2006). Predicting failures of computer systems: a case study for a telecommunication system. Proceedings 20th IEEE International Parallel & Distributed Processing Symposium. doi:10.1109/ipdps.2006.1639672Shi, L., Chen, H., Sun, J., & Li, K. (2012). vCUDA: GPU-Accelerated High-Performance Computing in Virtual Machines. IEEE Transactions on Computers, 61(6), 804-816. doi:10.1109/tc.2011.112D. P. Siewiorek and R. S. Swarz. 1998. Reliable Computer Systems 3rd ed. A. K. Peters Ltd. D. P. Siewiorek and R. S. Swarz. 1998. Reliable Computer Systems 3rd ed. A. K. Peters Ltd.Singh, S., & Chana, I. (2016). A Survey on Resource Scheduling in Cloud Computing: Issues and Challenges. Journal of Grid Computing, 14(2), 217-264. doi:10.1007/s10723-015-9359-2Slegel, T. J., Averill, R. M., Check, M. A., Giamei, B. C., Krumm, B. W., Krygowski, C. A., … Webb, C. F. (1999). IBM’s S/390 G5 microprocessor design. IEEE Micro, 19(2), 12-23. doi:10.1109/40.755464Sridhar, A., Sabry, M. M., & Atienza, D. (2014). A Semi-Analytical Thermal Modeling Framework for Liquid-Cooled ICs. IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems, 33(8), 1145-1158. doi:10.1109/tcad.2014.2323194Sridharan, V., DeBardeleben, N., Blanchard, S., Ferreira, K. B., Stearley, J., Shalf, J., & Gurumurthi, S. (2015). Memory Errors in Modern Systems. ACM SIGARCH Computer Architecture News, 43(1), 297-310. doi:10.1145/2786763.2694348Stathis, J. H. (2018). The physics of NBTI: What do we really know? 2018 IEEE International Reliability Physics Symposium (IRPS). doi:10.1109/irps.2018.8353539Stellner, G. (s. f.). CoCheck: checkpointing and process migration for MPI. Proceedings of International Conference on Parallel Processing. doi:10.1109/ipps.1996.508106Stone, J. E., Gohara, D., & Shi, G. (2010). OpenCL: A Parallel Programming Standard for Heterogeneous Computing Systems. Computing in Science & Engineering, 12(3), 66-73. doi:10.1109/mcse.2010.69Subasi, O., Di, S., Bautista-Gomez, L., Balaprakash, P., Unsal, O., Labarta, J., … Cappello, F. (2018). Exploring the capabilities of support vector machines in detecting silent data corruptions. Sustainable Computing: Informatics and Systems, 19, 277-290. doi:10.1016/j.suscom.2018.01.004Tang, D., & Iyer, R. K. (1993). Dependability measurement and modeling of a multicomputer system. IEEE Transactions on Computers, 42(1), 62-75. doi:10.1109/12.192214D. Turnbull and N. Alldrin. 2003. Failure Prediction in Hardware Systems. Tech. rep. University of California San Diego CA. Retrieved from http://www.cs.ucsd.edu/ dturnbul/Papers/ServerPrediction.pdf. D. Turnbull and N. Alldrin. 2003. Failure Prediction in Hardware Systems. Tech. rep. University of California San Diego CA. Retrieved from http://www.cs.ucsd.edu/ dturnbul/Papers/ServerPrediction.pdf.Vilalta, R., Apte, C. V., Hellerstein, J. L., Ma, S., & Weiss, S. M. (2002). Predictive algorithms in the management of computer systems. IBM Systems Journal, 41(3), 461-474. doi:10.1147/sj.413.0461Vinoski, S. (2007). Reliability with Erlang. IEEE Internet Com

Low-cost and efficient fault detection and diagnosis schemes for modern cores

Continuous improvements in transistor scaling together with microarchitectural advances have made possible the widespread adoption of high-performance processors across all market segments. However, the growing reliability threats induced by technology scaling and by the complexity of designs are challenging the production of cheap yet robust systems. Soft error trends are haunting, especially for combinational logic, and parity and ECC codes are therefore becoming insufficient as combinational logic turns into the dominant source of soft errors. Furthermore, experts are warning about the need to also address intermittent and permanent faults during processor runtime, as increasing temperatures and device variations will accelerate inherent aging phenomena. These challenges specially threaten the commodity segments, which impose requirements that existing fault tolerance mechanisms cannot offer. Current techniques based on redundant execution were devised in a time when high penalties were assumed for the sake of high reliability levels. Novel light-weight techniques are therefore needed to enable fault protection in the mass market segments. The complexity of designs is making post-silicon validation extremely expensive. Validation costs exceed design costs, and the number of discovered bugs is growing, both during validation and once products hit the market. Fault localization and diagnosis are the biggest bottlenecks, magnified by huge detection latencies, limited internal observability, and costly server farms to generate test outputs. This thesis explores two directions to address some of the critical challenges introduced by unreliable technologies and by the limitations of current validation approaches. We first explore mechanisms for comprehensively detecting multiple sources of failures in modern processors during their lifetime (including transient, intermittent, permanent and also design bugs). Our solutions embrace a paradigm where fault tolerance is built based on exploiting high-level microarchitectural invariants that are reusable across designs, rather than relying on re-execution or ad-hoc block-level protection. To do so, we decompose the basic functionalities of processors into high-level tasks and propose three novel runtime verification solutions that combined enable global error detection: a computation/register dataflow checker, a memory dataflow checker, and a control flow checker. The techniques use the concept of end-to-end signatures and allow designers to adjust the fault coverage to their needs, by trading-off area, power and performance. Our fault injection studies reveal that our methods provide high coverage levels while causing significantly lower performance, power and area costs than existing techniques. Then, this thesis extends the applicability of the proposed error detection schemes to the validation phases. We present a fault localization and diagnosis solution for the memory dataflow by combining our error detection mechanism, a new low-cost logging mechanism and a diagnosis program. Selected internal activity is continuously traced and kept in a memory-resident log whose capacity can be expanded to suite validation needs. The solution can catch undiscovered bugs, reducing the dependence on simulation farms that compute golden outputs. Upon error detection, the diagnosis algorithm analyzes the log to automatically locate the bug, and also to determine its root cause. Our evaluations show that very high localization coverage and diagnosis accuracy can be obtained at very low performance and area costs. The net result is a simplification of current debugging practices, which are extremely manual, time consuming and cumbersome. Altogether, the integrated solutions proposed in this thesis capacitate the industry to deliver more reliable and correct processors as technology evolves into more complex designs and more vulnerable transistors.El continuo escalado de los transistores junto con los avances microarquitectónicos han posibilitado la presencia de potentes procesadores en todos los segmentos de mercado. Sin embargo, varios problemas de fiabilidad están desafiando la producción de sistemas robustos. Las predicciones de "soft errors" son inquietantes, especialmente para la lógica combinacional: soluciones como ECC o paridad se están volviendo insuficientes a medida que dicha lógica se convierte en la fuente predominante de soft errors. Además, los expertos están alertando acerca de la necesidad de detectar otras fuentes de fallos (causantes de errores permanentes e intermitentes) durante el tiempo de vida de los procesadores. Los segmentos "commodity" son los más vulnerables, ya que imponen unos requisitos que las técnicas actuales de fiabilidad no ofrecen. Estas soluciones (generalmente basadas en re-ejecución) fueron ideadas en un tiempo en el que con tal de alcanzar altos nivel de fiabilidad se asumían grandes costes. Son por tanto necesarias nuevas técnicas que permitan la protección contra fallos en los segmentos más populares. La complejidad de los diseños está encareciendo la validación "post-silicon". Su coste excede el de diseño, y el número de errores descubiertos está aumentando durante la validación y ya en manos de los clientes. La localización y el diagnóstico de errores son los mayores problemas, empeorados por las altas latencias en la manifestación de errores, por la poca observabilidad interna y por el coste de generar las señales esperadas. Esta tesis explora dos direcciones para tratar algunos de los retos causados por la creciente vulnerabilidad hardware y por las limitaciones de los enfoques de validación. Primero exploramos mecanismos para detectar múltiples fuentes de fallos durante el tiempo de vida de los procesadores (errores transitorios, intermitentes, permanentes y de diseño). Nuestras soluciones son de un paradigma donde la fiabilidad se construye explotando invariantes microarquitectónicos genéricos, en lugar de basarse en re-ejecución o en protección ad-hoc. Para ello descomponemos las funcionalidades básicas de un procesador y proponemos tres soluciones de `runtime verification' que combinadas permiten una detección de errores a nivel global. Estas tres soluciones son: un verificador de flujo de datos de registro y de computación, un verificador de flujo de datos de memoria y un verificador de flujo de control. Nuestras técnicas usan el concepto de firmas y permiten a los diseñadores ajustar los niveles de protección a sus necesidades, mediante compensaciones en área, consumo energético y rendimiento. Nuestros estudios de inyección de errores revelan que los métodos propuestos obtienen altos niveles de protección, a la vez que causan menos costes que las soluciones existentes. A continuación, esta tesis explora la aplicabilidad de estos esquemas a las fases de validación. Proponemos una solución de localización y diagnóstico de errores para el flujo de datos de memoria que combina nuestro mecanismo de detección de errores, junto con un mecanismo de logging de bajo coste y un programa de diagnóstico. Cierta actividad interna es continuamente registrada en una zona de memoria cuya capacidad puede ser expandida para satisfacer las necesidades de validación. La solución permite descubrir bugs, reduciendo la necesidad de calcular los resultados esperados. Al detectar un error, el algoritmo de diagnóstico analiza el registro para automáticamente localizar el bug y determinar su causa. Nuestros estudios muestran un alto grado de localización y de precisión de diagnóstico a un coste muy bajo de rendimiento y área. El resultado es una simplificación de las prácticas actuales de depuración, que son enormemente manuales, incómodas y largas. En conjunto, las soluciones de esta tesis capacitan a la industria a producir procesadores más fiables, a medida que la tecnología evoluciona hacia diseños más complejos y más vulnerables

Decompose and Conquer: Addressing Evasive Errors in Systems on Chip

Modern computer chips comprise many components, including microprocessor cores, memory modules, on-chip networks, and accelerators. Such system-on-chip (SoC) designs are deployed in a variety of computing devices: from internet-of-things, to smartphones, to personal computers, to data centers. In this dissertation, we discuss evasive errors in SoC designs and how these errors can be addressed efficiently. In particular, we focus on two types of errors: design bugs and permanent faults. Design bugs originate from the limited amount of time allowed for design verification and validation. Thus, they are often found in functional features that are rarely activated. Complete functional verification, which can eliminate design bugs, is extremely time-consuming, thus impractical in modern complex SoC designs. Permanent faults are caused by failures of fragile transistors in nano-scale semiconductor manufacturing processes. Indeed, weak transistors may wear out unexpectedly within the lifespan of the design. Hardware structures that reduce the occurrence of permanent faults incur significant silicon area or performance overheads, thus they are infeasible for most cost-sensitive SoC designs. To tackle and overcome these evasive errors efficiently, we propose to leverage the principle of decomposition to lower the complexity of the software analysis or the hardware structures involved. To this end, we present several decomposition techniques, specific to major SoC components. We first focus on microprocessor cores, by presenting a lightweight bug-masking analysis that decomposes a program into individual instructions to identify if a design bug would be masked by the program's execution. We then move to memory subsystems: there, we offer an efficient memory consistency testing framework to detect buggy memory-ordering behaviors, which decomposes the memory-ordering graph into small components based on incremental differences. We also propose a microarchitectural patching solution for memory subsystem bugs, which augments each core node with a small distributed programmable logic, instead of including a global patching module. In the context of on-chip networks, we propose two routing reconfiguration algorithms that bypass faulty network resources. The first computes short-term routes in a distributed fashion, localized to the fault region. The second decomposes application-aware routing computation into simple routing rules so to quickly find deadlock-free, application-optimized routes in a fault-ridden network. Finally, we consider general accelerator modules in SoC designs. When a system includes many accelerators, there are a variety of interactions among them that must be verified to catch buggy interactions. To this end, we decompose such inter-module communication into basic interaction elements, which can be reassembled into new, interesting tests. Overall, we show that the decomposition of complex software algorithms and hardware structures can significantly reduce overheads: up to three orders of magnitude in the bug-masking analysis and the application-aware routing, approximately 50 times in the routing reconfiguration latency, and 5 times on average in the memory-ordering graph checking. These overhead reductions come with losses in error coverage: 23% undetected bug-masking incidents, 39% non-patchable memory bugs, and occasionally we overlook rare patterns of multiple faults. In this dissertation, we discuss the ideas and their trade-offs, and present future research directions.PHDComputer Science & EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttps://deepblue.lib.umich.edu/bitstream/2027.42/147637/1/doowon_1.pd

A critical analysis of research potential, challenges and future directives in industrial wireless sensor networks

In recent years, Industrial Wireless Sensor Networks (IWSNs) have emerged as an important research theme with applications spanning a wide range of industries including automation, monitoring, process control, feedback systems and automotive. Wide scope of IWSNs applications ranging from small production units, large oil and gas industries to nuclear fission control, enables a fast-paced research in this field. Though IWSNs offer advantages of low cost, flexibility, scalability, self-healing, easy deployment and reformation, yet they pose certain limitations on available potential and introduce challenges on multiple fronts due to their susceptibility to highly complex and uncertain industrial environments. In this paper a detailed discussion on design objectives, challenges and solutions, for IWSNs, are presented. A careful evaluation of industrial systems, deadlines and possible hazards in industrial atmosphere are discussed. The paper also presents a thorough review of the existing standards and industrial protocols and gives a critical evaluation of potential of these standards and protocols along with a detailed discussion on available hardware platforms, specific industrial energy harvesting techniques and their capabilities. The paper lists main service providers for IWSNs solutions and gives insight of future trends and research gaps in the field of IWSNs

An adaptive communication model for mobile agents in highly dynamic networks based on forming flexible regions via swarming behabiour

Im letzten Jahrzehnt gilt die mobile Agententechnologie als eines der wichtigsten Forschungsgebiete der Informatik. Mobile Agenten sind Software, die Aufträge im Namen ihrer Besitzer erfüllen können (ZK02). Mobile Agenten können selbstbestimmend von Server zu Server migrieren, sie können ihren Arbeitsstand speichern und dann ihre Arbeit am neuen Aufenthaltsort fortsetzen. Ihre wichtigsten Merkmale sind: autonom, reaktiv, opportunistisch und zielgerichtet. Diese genannten Merkmale sind für verteilte Anwendungen geeignet, z. B: Ressourcenverteilung (TYI99), Netzwerkmanagement (MT99), E-Commerce (BGP05), Fernüberwachung CMCV02), Gesundheitssysteme (Mor06), um nur einige zu nennen. Es ist die Mobilität der Agenten, die mobile Agenten zu einer guten Computing Technologie macht (Pau02). Kommunikation ist wesentlich in verteilten Systemen, und dies gilt auch für mobile Agentensysteme (LHL02). Neben den eher technischen Aspekten mobiler Agententechnologien, wie Migration (Bra03) und Kontrollmechanismen (Bau00), wurde die Kommunikation zwischen den Agenten als eine der wichtigsten Komponenten in der mobilen Agententechnologie identifiziert (FLP98). Es ist diskutiert worden, ob Agentenkommunikation ausschließlich lokal sein sollte, angesichts der Tatsache, dass mobile Agenten erfunden wurden, weil man die Verarbeitung zu den Daten tragen möchte, anstatt umgekehrt (SS97). Allerdings hat es sich gezeigt, dass es in vielen Fällen lohnt, wenn die mobilen Agenten kommunizieren anstatt migrieren (BHR+97),(FLP98),(ea02). Kommunikation hilft mobilen Agenten, eine bessere Leistung zu erreichen (Erf04). Kommunikation ist daher aus unserer Sicht die Basis mobiler Agentensysteme. An der Friedrich-Schiller-Universität Jena ist das interdisziplinäre Projekt SpeedUp seit April 2009 durchgeführt worden (FSU11). Das Projekt entwickelt ein Unterstützungssystem für Rettungs- und Einsatzkräfte bei einem Massenanfall von Verletzten (MANV). Im Projekt ist das Konzept mobiler Agenten als eine der Basistechnologien ausgesucht worden. Die hohe Netzwerkdynamik stellt neue Herausforderungen für mobile Agentensysteme dar, die in MANV Rettungsszenarien arbeiten. Es wird erwartet, dass die Kommunikation sich an die dynamische Umgebung zur Ausführungszeit anpassen kann. Dazu fehlen heute tragfähige Konzepte. In dieser Arbeit wird daher ein Ansatz zur adaptiven Kommunikation mobiler Agenten in hochdynamischen Netzwerken des SpeedUp-Typs vorgestellt. Nach unserer Beurteilung sollte die Kommunikation zwischen den mobilen Agenten nicht nur Interoperabilität und Standortunabhängigkeit, sondern auch Anpassungsfähigkeit aufweisen. Wir schlagen ein Kommunikationsmodell vor, das sich auf den koordinierenden Aspekt und das Zusammenspiel der Agenten konzentriert, sowie die Zuverlässigkeit und die Fehlertoleranz unterstützt. Um die Netzwerkdynamik zu managen, planen wir einen selbstorganisierten Mechanismus zu verwenden, der sich ”honey bee” inspiriertes Verfahren nennt. Wir werden dazu eine Software für ein adaptives Kommunikationsmodell mobiler Agenten, basierend auf das mobile Agentensystem Ellipsis gestalten, implementieren, und evaluieren.In the last decade, mobile agent technology has been considered as one of the most active research fields in computer science. Mobile agents are software agents which run on behalf of their owner to fulfil jobs that have been ordered (ZK02). They have the ability to migrate from location to location in the network, they can temporarily save their work state at the time of migrating and then restore their tasks when arriving at the new location. Their outstanding characteristics are to be autonomous, reactive, opportunistic, and goal-oriented. Those characteristics are suitable for distributed applications, such as resource allocation (TYI99), network management (MT99), remote supervision (CMCV02), e-commerce (BGP05), health care systems (Mor06), to name but a few. It is the mobility of mobile agents that makes them to be a powerful computing technique, especially for pervasive computing (Pau02). Communication is an essential component of distributed systems and this is no exception for multiagent systems (LHL02). Besides technical aspects of mobile agent technology, such as migrations (Bra03) and control mechanisms (Bau00), communication between mobile agents has been identified as an important issue in mobile agent technology (FLP98). It has been argued whether agent communication should be remote or restricted to local, considering that the main reason for the birth of mobile agents was to move computation to the data instead of moving the data to the computation. Therefore, remote communication could be avoided completely (SS97). However, it has been shown that in many cases mobile agent systems can benefit from performing communication instead of sending agents to remote platforms (BHR+97),(FLP98),(ea02). The communication between agents helps to increase the chance that an agent attains its objectives (Erf04). Communication is one of the bases of multi-agent systems; it is difficult, if not impossible for a group of agents to solve tasks without communication (Hel03). At Friedrich Schiller University Jena, an interdisciplinary project, named SpeedUp, for the support of handling mass casualty incidents (MCI) has been in development since April 2009 (FSU11). In the project the mobile agent concept has been selected as one of the main technologies on the communication infrastructure level. The dynamic nature of MCI networks poses new challenges to mobile systems working in a rescue scenario. For mobile agent systems working in highly dynamic networks, communication between mobile agents is expected to adapt easily to environmental stimuli which occur at execution time. Much research has been done into the design of an appropriate, highly flexible model for mobile agent communication in dynamic networks. However, to the best of our knowledge none of the suggested solutions has been able to achieve the necessary performance and quality attributes to count as a practical solution. In most cases, these existing approaches seem to neglect the inherent dynamics of modern networks. In this dissertation, we present our approach for an adaptive communication model for mobile agent systems in highly dynamic networks of the SpeedUp type. In our opinion, communication in mobile agent systems should deal not only with interoperability and location-transparency, but also with adaptability. To achieve industrial strength, we propose a model for agent communication that focuses on the cooperation aspect of agent interaction and supports reliability and fault tolerance as the key qualities, while keeping up an acceptable overall performance at the same time. For the management of highly dynamic communication domains we use a self-organizing mechanism, a so-called honey bee inspired algorithm. In order to ensure message delivery, we propose a resilient mechanism for the management of a mobile agent’s location. Based on this thesis, we will design, implement and evaluate a software prototype for an adaptive model for mobile agent communication based on the Ellipsis mobile agent system