Delta-connected cascaded H-bridge multilevel photovoltaic converters

© 2015 IEEE. Multilevel cascaded H-bridge converters are becoming popular for next generation large-scale photovoltaic power converters. However, the power generation levels in the three phases can be significantly unequal, especially in a large plant, owing to the non-uniform irradiance levels and/or ambient temperatures. This paper proposes the delta-connected cascaded H-bridge converter for large-scale photovoltaic farms. Compared to the existing star connection, the delta connection reduces the converter overrating required. Experimental results obtained from a 430 V, 10 kW, three-phase, seven-level, delta connected cascaded H-bridge converter prototype are provided to demonstrate the superiority of the delta connection

Novel three-phase topology for cascaded multilevel medium-voltage conversion systems in large-scale PV plants

Solar photovoltaic renewable energy systems are expanding in the power sector thanks to its increasingly competitive prices. Traditionally, large-scale PV plants have reduced their cost by increasing the power ratings of the inverters and the line-frequency transformers. However, cost-reduction limits of large-scale PV plants are being reached. Cascaded converters have appeared as a solution to continue reducing the cost of large PV plants as they reduce the wiring cost. In this paper, a novel three-phase topology for cascaded conversion structures is proposed. It only has 2 conversion steps, one without switching losses. Hence, it increases the efficiency and reduces the cost of the previously proposed cascaded conversion systems. The topology is patent pending.The authors acknowledge the financial and continuous support of INGETEAM POWER TECHNOLOGY

Medium-voltage cascaded sequential topology for large-scale PV plants

Photovoltaic (PV) conversion systems are in continuous development due to their increasingly competitive prices. The traditional configuration of large-scale PV plants is based on high-power central inverters, which have reduced their cost by increasing their power rating. However, this cost reduction is expected to saturate in the near future, mainly due to an increase in the cost of the dc wiring. Cascaded conversion systems have appeared as potential solutions to continue reducing the PV plant cost. They consist of several conversion units whose ac outputs are connected in series. This enables the power-rating reduction of each individual conversion unit, while maintaining the power rating of the conversion structure. Thus, the conversion units are placed closer to the PV panels, reducing the dc wiring cost. In this paper, a novel three-phase topology for medium-voltage cascaded conversion systems is presented. The proposed topology is formed of several conversion units, each one with a reduced number of conversion stages, namely, dc/ac, medium-frequency isolation and ac/ac. Moreover, thanks to its sequential operation and modulation technique, zero-voltage switching and zero-current switching are achieved in all conversion stages. In this way, with respect to the configuration with central inverters, the proposed topology has the advantages of cascaded conversion systems. In comparison to previously investigated cascaded topologies, the proposed topology also presents promising characteristics, representing a potential cost reduction and efficiency increase. An experimental validation of the topology is carried out in a laboratory prototype consisting of three conversion units.This work was supported in part by the Spanish State Research Agency (AEI) under Grant PID2019-110956RB-I00 /AEI/10.13039/501100011033, and in part by the Public University of Navarre through a Ph.D. Scholarship

Harmonics Mitigation in Cascaded Multilevel PV Inverters During Power Imbalance Between Cells

This paper presents a grid connected multilevel topology for photovoltaic (PV) systems. Usually, multilevel converters for PV application suffer from a distorted output current and voltage when the submodules are not subjected to an even solar irradiance. The difference in submodules irradiance results in different submodules duty cycles when maintaining the maximum power point tracking (MPPT). The distortion of the output current is proportional with the difference of the cells duty cycles. To this regard, a multilevel topology for PV applications is proposed along with a control and modulation strategy. In this proposed topology, H6 bridge-based cell is used instead of an H-bridge one. In case of solar irradiance mismatch, the proposed converter injects power with less voltage from the shaded cells without altering the PV voltage, and hence, the MPPT. This modification allows retaining a tantamount duty cycle in all cells whatever the meteorological conditions are present. To test the effectiveness of the proposed idea, a detailed simulation model was set up. The results show that the proposed concept provides a significantly improved output current quality compared to the cascaded H-bridge topology

Energy balancing with wide range of operation in the isolated multi-modular converter

The series-connection of modules in multilevel converters are prone to energy imbalances in the dc capacitor due to the differences between the power absorbed and consumed. In renewable energy applications where the primary source is directly connected to each module, energy imbalances can be even worse if the primary sources are affected by unpredictable weather conditions. Therefore, control strategies are required to compensate such energy imbalances, while maintaining the correct converter operation. Focusing our attention on a cascaded transformer multilevel inverter called Isolated MultiModular Converter, this paper introduces the combination of two control strategies aimed at providing a wide range of operation under imbalanced energy states. A general analytical model, including the regulation capability and differences with an existing strategy are presented to demonstrate the performance of the control proposed. The effectiveness of the proposal is validated through experimental results based on a three-phase multilevel prototype.This work was supported in part by the European Commission under Project FLEXITRANSTORE—H2020-LCE-2016-2017-SGS-774407 and Project INTERRFACE—H2020-LC-SC3-2018-ES-SCC-824330, and in part by the Spanish Ministry of Science under Project ENE2017-88889-C2-1-R.Peer ReviewedPostprint (published version

Cascaded Converters For Integration And Management Of Grid Level Energy Storage Systems

ABSTRACT CASCADED CONVERTERS FOR INTEGRATION AND MANAGEMENT OF GRID-LEVEL ENERGY STORAGE SYSTEMS by ZUHAIR ALAAS December 2017 Advisor: Dr. Caisheng Wang Major: ELECTRICAL ENGINEERING Degree: Doctor of Philosophy This research work proposes two cascaded multilevel inverter structures for BESS. The gating and switching control of switching devices in both inverter typologies are done by using a phase-shifted PWM scheme. The first proposed isolated multilevel inverter is made up of three-phase six-switch inverter blocks with a reduced number of power components compared with traditional isolated CHB. The suggested isolated converter has only one battery string for three-phase system that can be used for high voltage and high power applications such as grid connected BESS and alternative energy systems. The isolated inverter enables dq frame based simple control and eliminates the issues of single-phase pulsating power, which can cause detrimental impacts on certain dc sources. Simulation studies have been carried out to compare the proposed isolated multi-level inverter with an H-bridge cascaded transformer inverter. The simulation results verified the performance of the isolated inverter. The second proposed topology is a Hierarchal Cascaded Multilevel Converter (HCMC) with phase to phase SOC balancing capability which also for high voltage and high power battery energy storage systems. The HCMC has a hybrid structure of half-bridge converters and H-bridge inverters and the voltage can be hierarchically cascaded to reach the desired value at the half-bridge and the H-bridge levels. The uniform SOC battery management is achieved by controlling the half-bridge converters that are connected to individual battery modules/cells. Simulation studies and experimental results have been carried on a large scale battery system under different operating conditions to verify the effectiveness of the proposed inverters. Moreover, this dissertation presents a new three-phase SOC equalizing circuit, called six-switch energy-level balancing circuit (SSBC), which can be used to realize uniform SOC operation for full utilization of the battery capacity in proposed HCMC or any CMI inverter while keeping balanced three-phase operation. A sinusoidal PWM modulation technique is used to control power transferring between phases. Simulation results have been carried out to verify the performance of the proposed SSBC circuit of uniform three-phase SOC balancing

Cascaded Multilevel PV Inverter with Improved Harmonic Performance During Power Imbalance Between Power Cells

The difference in power cell irradiances in cascaded multilevel converters results in different duty cycles among those cells when maintaining the maximum power point tracking (MPPT). However, the difference in cell duty cycles is undesired since it is proportional to the output voltage and current distortions. To this regard, a multilevel topology for photovoltaic (PV) applications is proposed, where an H6 bridge power cell is used instead of an H-bridge one. In case of solar irradiance mismatch among the power cells, the proposed converter injects power with lower voltage from the shaded cells without altering the PV voltage; hence maintaining the MPPT operation. This modification allows us to retain an equal duty cycle in all the power cells whatever the meteorological conditions are present; consequently, maintaining good output voltage and current waveform qualities. To test the effectiveness of the proposed solution, a detailed simulation model as well as an experimental prototype is built. The obtained results show that the proposed topology provides significantly improved output voltage and current qualities compared to the cascaded H-bridge one. The performance of the proposed topology compared to one offering improved harmonics performance, according to the European efficiency, has been also compared, where an enhancement of 2.64% has been registered.</p

A comprehensive review on modular multilevel converters, submodule topologies, and modulation techniques

The concept of the modular multilevel converter (MLC) has been raising interest in research in order to improve their performance and applicability. The potential of an MLC is enormous, with a great focus on medium- and high-voltage applications, such as solar photovoltaic and wind farms, electrified railway systems, or power distribution systems. This concept makes it possible to overcome the limitation of the semiconductors blocking voltages, presenting advantageous characteristics. However, the complexity of implementation and control presents added challenges. Thus, this paper aims to contribute with a critical and comparative analysis of the state-of-the-art aspects of this concept in order to maximize its potential. In this paper, different power electronics converter topologies that can be integrated into the MLC concept are presented, highlighting the advantages and disadvantages of each topology. Nevertheless, different modulation techniques used in an MLC are also presented and analyzed. Computational simulations of all the modulation techniques under analysis were developed, based on four cascaded full-bridge topologies. Considering the simulation results, a comparative analysis was possible to make regarding the symmetry of the synthesized waveforms, the harmonic content, and the power distribution in each submodule constituting the MLC.This work has been supported by FCT—Fundação para a Ciência e Tecnologia, within the R&D Units Project Scope UIDB/00319/2020. Mr. Luis A. M. Barros is supported by the doctoral scholarship PD/BD/143006/2018, granted by the Portuguese FCT foundation