Parameterizable network-on-chip emulation framework

Networks-on-Chip (NoCs) have been proposed as a promising solution to complex on-chip communication problems. But there is no public accessible HDL synthesizable NoC framework which connects industrial level cores and runs real applications on them. Moreover, many challenging research problems remain unsolved at all levels of design abstraction; design exploration of NoC architecture for applications, scheduling and mapping algorithms, evaluation of switching, topology or routing algorithm for efficient execution of application and optimizing communication cost, area, energy etc Solution to solve the above problem calls for the development of synthesizable, parameterizable NoC Framework that would evaluate and implement the above outstanding research problems and algorithms with minimum ease and flexibility. The proposed NoC Framework has been used to specifically evaluate the following algorithms or variations in architecture: i) Evaluate Switching Algorithms compare latency, congestion, area and power of Wormhole (WH) and Store and Forward (SF) switching, ii) Efficient Router Architecture: Proposed an efficient Virtual Channel architecture with loopback for SF routing is introduced to improve throughput, latency and area, iii) Static routing algorithm: Proposed a simple and efficient routing algorithm called “Mirror Routing” for Torus architectures. This helps in reducing congestion and the routing algorithm is also deadlock free, iv) Adaptive Routing Algorithm: Proposed and evaluated an adaptive routing algorithm for WK topology. The simulation results show Wormhole Routing with better latency than Store and Forward. Area and Power usage is also relatively less for Wormhole Routing. Study on different traffic scenarios with different Virtual Channel architectures in Store and Forward routing shows considerable improvement in latency in Virtual Channel architecture with loopback. Also it is proved that the proposed Mirror Routing algorithm is able to handle a single congestion or fault in routing path. The latency increases with increase in size of Torus structure. The Adaptive routing algorithm proposed for WK Topology results in increase in latency but can be considered in scenarios where the receiver node at the congested link is comparatively slow or when the fault in link is permanent

Design and Implementation of A Debugging System for OpenRISC Processor

A gdb-based debugging system for OpenRISC1200 Processor based on IEEE1149.1 JTAG interface is developed. Unlike usual gdb-based embedded debugging systems, this system uses the hardware debugging modules in OpenRISC1200 Processor to extend GDB. Its debugging agent doesn't work on the target but on the host computer, so it can work well without any target operating system support. In this paper, the system's general frame design and realization of the main modules are explained in detail. It is verified by both FPGA prototype emulation and software simulation. It establishes a good foundation for further development on OpenRISC

Methodology to accelerate diagnostic coverage assessment: MADC

Tese (doutorado) - Universidade Federal de Santa Catarina, Centro Tecnológico, Programa de Pós-Graduação em Engenharia Elétrica, Florianópolis, 2016.Os veículos da atualidade vêm integrando um número crescente de eletrônica embarcada, com o objetivo de permitir uma experiência mais segura aos motoristas. Logo, a garantia da segurança física é um requisito que precisa ser observada por completo durante o processo de desenvolvimento. O padrão ISO 26262 provê medidas para garantir que esses requisitos não sejam negligenciados. Injeção de falhas é fortemente recomendada quando da verificação do funcionamento dos mecanismos de segurança implementados, assim como sua capacidade de cobertura associada ao diagnóstico de falhas existentes. A análise exaustiva não é obrigatória, mas evidências de que o máximo esforço foi feito para acurar a cobertura de diagnóstico precisam ser apresentadas, principalmente durante a avalição dos níveis de segurança associados a arquitetura implementada em hardware. Estes níveis dão suporte às alegações de que o projeto obedece às métricas de segurança da integridade física exigida em aplicações automotivas. Os níveis de integridade variam de A à D, sendo este último o mais rigoroso. Essa Tese explora o estado-da-arte em soluções de verificação, e tem por objetivo construir uma metodologia que permita acelerar a verificação da cobertura de diagnóstico alcançado. Diferentemente de outras técnicas voltadas à aceleração de injeção de falhas, a metodologia proposta utiliza uma plataforma de hardware dedicada à verificação, com o intuito de maximizar o desempenho relativo a simulação de falhas. Muitos aspectos relativos a ISO 26262 são observados de forma que a presente contribuição possa ser apreciada no segmento automotivo. Por fim, uma arquitetura OpenRISC é utilizada para confirmar os resultados alcançados com essa solução proposta pertencente ao estado-da-arte.Abstract : Modern vehicles are integrating a growing number of electronics to provide a safer experience for the driver. Therefore, safety is a non-negotiable requirement that must be considered through the vehicle development process. The ISO 26262 standard provides guidance to ensure that such requirements are implemented. Fault injection is highly recommended for the functional verification of safety mechanisms or to evaluate their diagnostic coverage capability. An exhaustive analysis is not required, but evidence of best effort through the diagnostic coverage assessment needs to be provided when performing quantitative evaluation of hardware architectural metrics. These metrics support that the automotive safety integrity level ? ranging from A (lowest) to D (strictest) levels ? was obeyed. This thesis explores the most advanced verification solutions in order to build a methodology to accelerate the diagnostic coverage assessment. Different from similar techniques for fault injection acceleration, the proposed methodology does not require any modification of the design model to enable acceleration. Many functional safety requisites in the ISO 26262 are considered thus allowing the contribution presented to be a suitable solution for the automotive segment. An OpenRISC architecture is used to confirm the results achieved by this state-of-the-art solution

Fast Simulation of Programmable Network Forwarding Plane Devices

With the evolution of the Internet, the processing of packets at the routers while providing flexibility in deploying new protocols and services at the same time has become a major concern. Programmable forwarding elements with high processing capability have emerged as a solution. But the main challenge is to find the optimal hardware architecture while taking into account constraints such as different packet processing functions, task scheduling options, electrical power consumption and providing quality-of-service (QoS) guarantees. Therefore, it is essential to investigate methods that help in identifying limitations and bottlenecks before physical fabrication. Having an appropriate model provides designers a progressive path to narrow the design space and establish credible and feasible alternatives before deciding on an implementation. In this thesis, we propose a flexible and fast instruction accurate host-compiled simulator to make it possible to explore wide ranges of architectures and application scenarios to find the optimal configuration that meets given performance, throughput and latency for programmable forwarding elements. Application developers can use the simulator as a virtual prototype to simulate and debug their applications before hardware availability. Moreover, forwarding device architects can use simulator to evaluate the trade-offs between different hardware/software design decisions

Cross-Layer Rapid Prototyping and Synthesis of Application-Specific and Reconfigurable Many-accelerator Platforms

Technological advances of recent years laid the foundation consolidation of informatisationof society, impacting on economic, political, cultural and socialdimensions. At the peak of this realization, today, more and more everydaydevices are connected to the web, giving the term ”Internet of Things”. The futureholds the full connection and interaction of IT and communications systemsto the natural world, delimiting the transition to natural cyber systems and offeringmeta-services in the physical world, such as personalized medical care, autonomoustransportation, smart energy cities etc. . Outlining the necessities of this dynamicallyevolving market, computer engineers are required to implement computingplatforms that incorporate both increased systemic complexity and also cover awide range of meta-characteristics, such as the cost and design time, reliabilityand reuse, which are prescribed by a conflicting set of functional, technical andconstruction constraints. This thesis aims to address these design challenges bydeveloping methodologies and hardware/software co-design tools that enable therapid implementation and efficient synthesis of architectural solutions, which specifyoperating meta-features required by the modern market. Specifically, this thesispresents a) methodologies to accelerate the design flow for both reconfigurableand application-specific architectures, b) coarse-grain heterogeneous architecturaltemplates for processing and communication acceleration and c) efficient multiobjectivesynthesis techniques both at high abstraction level of programming andphysical silicon level.Regarding to the acceleration of the design flow, the proposed methodologyemploys virtual platforms in order to hide architectural details and drastically reducesimulation time. An extension of this framework introduces the systemicco-simulation using reconfigurable acceleration platforms as co-emulation intermediateplatforms. Thus, the development cycle of a hardware/software productis accelerated by moving from a vertical serial flow to a circular interactive loop.Moreover the simulation capabilities are enriched with efficient detection and correctiontechniques of design errors, as well as control methods of performancemetrics of the system according to the desired specifications, during all phasesof the system development. In orthogonal correlation with the aforementionedmethodological framework, a new architectural template is proposed, aiming atbridging the gap between design complexity and technological productivity usingspecialized hardware accelerators in heterogeneous systems-on-chip and networkon-chip platforms. It is presented a novel co-design methodology for the hardwareaccelerators and their respective programming software, including the tasks allocationto the available resources of the system/network. The introduced frameworkprovides implementation techniques for the accelerators, using either conventionalprogramming flows with hardware description language or abstract programmingmodel flows, using techniques from high-level synthesis. In any case, it is providedthe option of systemic measures optimization, such as the processing speed,the throughput, the reliability, the power consumption and the design silicon area.Finally, on addressing the increased complexity in design tools of reconfigurablesystems, there are proposed novel multi-objective optimization evolutionary algo-rithms which exploit the modern multicore processors and the coarse-grain natureof multithreaded programming environments (e.g. OpenMP) in order to reduce theplacement time, while by simultaneously grouping the applications based on theirintrinsic characteristics, the effectively explore the design space effectively.The efficiency of the proposed architectural templates, design tools and methodologyflows is evaluated in relation to the existing edge solutions with applicationsfrom typical computing domains, such as digital signal processing, multimedia andarithmetic complexity, as well as from systemic heterogeneous environments, suchas a computer vision system for autonomous robotic space navigation and manyacceleratorsystems for HPC and workstations/datacenters. The results strengthenthe belief of the author, that this thesis provides competitive expertise to addresscomplex modern - and projected future - design challenges.Οι τεχνολογικές εξελίξεις των τελευταίων ετών έθεσαν τα θεμέλια εδραίωσης της πληροφοριοποίησης της κοινωνίας, επιδρώντας σε οικονομικές,πολιτικές, πολιτιστικές και κοινωνικές διαστάσεις. Στο απόγειο αυτής τη ςπραγμάτωσης, σήμερα, ολοένα και περισσότερες καθημερινές συσκευές συνδέονται στο παγκόσμιο ιστό, αποδίδοντας τον όρο «Ίντερνετ των πραγμάτων».Το μέλλον επιφυλάσσει την πλήρη σύνδεση και αλληλεπίδραση των συστημάτων πληροφορικής και επικοινωνιών με τον φυσικό κόσμο, οριοθετώντας τη μετάβαση στα συστήματα φυσικού κυβερνοχώρου και προσφέροντας μεταυπηρεσίες στον φυσικό κόσμο όπως προσωποποιημένη ιατρική περίθαλψη, αυτόνομες μετακινήσεις, έξυπνες ενεργειακά πόλεις κ.α. . Σκιαγραφώντας τις ανάγκες αυτής της δυναμικά εξελισσόμενης αγοράς, οι μηχανικοί υπολογιστών καλούνται να υλοποιήσουν υπολογιστικές πλατφόρμες που αφενός ενσωματώνουν αυξημένη συστημική πολυπλοκότητα και αφετέρου καλύπτουν ένα ευρύ φάσμα μεταχαρακτηριστικών, όπως λ.χ. το κόστος σχεδιασμού, ο χρόνος σχεδιασμού, η αξιοπιστία και η επαναχρησιμοποίηση, τα οποία προδιαγράφονται από ένα αντικρουόμενο σύνολο λειτουργικών, τεχνολογικών και κατασκευαστικών περιορισμών. Η παρούσα διατριβή στοχεύει στην αντιμετώπιση των παραπάνω σχεδιαστικών προκλήσεων, μέσω της ανάπτυξης μεθοδολογιών και εργαλείων συνσχεδίασης υλικού/λογισμικού που επιτρέπουν την ταχεία υλοποίηση καθώς και την αποδοτική σύνθεση αρχιτεκτονικών λύσεων, οι οποίες προδιαγράφουν τα μετα-χαρακτηριστικά λειτουργίας που απαιτεί η σύγχρονη αγορά. Συγκεκριμένα, στα πλαίσια αυτής της διατριβής, παρουσιάζονται α) μεθοδολογίες επιτάχυνσης της ροής σχεδιασμού τόσο για επαναδιαμορφούμενες όσο και για εξειδικευμένες αρχιτεκτονικές, β) ετερογενή αδρομερή αρχιτεκτονικά πρότυπα επιτάχυνσης επεξεργασίας και επικοινωνίας και γ) αποδοτικές τεχνικές πολυκριτηριακής σύνθεσης τόσο σε υψηλό αφαιρετικό επίπεδο προγραμματισμού,όσο και σε φυσικό επίπεδο πυριτίου.Αναφορικά προς την επιτάχυνση της ροής σχεδιασμού, προτείνεται μια μεθοδολογία που χρησιμοποιεί εικονικές πλατφόρμες, οι οποίες αφαιρώντας τις αρχιτεκτονικές λεπτομέρειες καταφέρνουν να μειώσουν σημαντικά το χρόνο εξομοίωσης. Παράλληλα, εισηγείται η συστημική συν-εξομοίωση με τη χρήση επαναδιαμορφούμενων πλατφορμών, ως μέσων επιτάχυνσης. Με αυτόν τον τρόπο, ο κύκλος ανάπτυξης ενός προϊόντος υλικού, μετατεθειμένος από την κάθετη σειριακή ροή σε έναν κυκλικό αλληλεπιδραστικό βρόγχο, καθίσταται ταχύτερος, ενώ οι δυνατότητες προσομοίωσης εμπλουτίζονται με αποδοτικότερες μεθόδους εντοπισμού και διόρθωσης σχεδιαστικών σφαλμάτων, καθώς και μεθόδους ελέγχου των μετρικών απόδοσης του συστήματος σε σχέση με τις επιθυμητές προδιαγραφές, σε όλες τις φάσεις ανάπτυξης του συστήματος. Σε ορθογώνια συνάφεια με το προαναφερθέν μεθοδολογικό πλαίσιο, προτείνονται νέα αρχιτεκτονικά πρότυπα που στοχεύουν στη γεφύρωση του χάσματος μεταξύ της σχεδιαστικής πολυπλοκότητας και της τεχνολογικής παραγωγικότητας, με τη χρήση συστημάτων εξειδικευμένων επιταχυντών υλικού σε ετερογενή συστήματα-σε-ψηφίδα καθώς και δίκτυα-σε-ψηφίδα. Παρουσιάζεται κατάλληλη μεθοδολογία συν-σχεδίασης των επιταχυντών υλικού και του λογισμικού προκειμένου να αποφασισθεί η κατανομή των εργασιών στους διαθέσιμους πόρους του συστήματος/δικτύου. Το μεθοδολογικό πλαίσιο προβλέπει την υλοποίηση των επιταχυντών είτε με συμβατικές μεθόδους προγραμματισμού σε γλώσσα περιγραφής υλικού είτε με αφαιρετικό προγραμματιστικό μοντέλο με τη χρήση τεχνικών υψηλού επιπέδου σύνθεσης. Σε κάθε περίπτωση, δίδεται η δυνατότητα στο σχεδιαστή για βελτιστοποίηση συστημικών μετρικών, όπως η ταχύτητα επεξεργασίας, η ρυθμαπόδοση, η αξιοπιστία, η κατανάλωση ενέργειας και η επιφάνεια πυριτίου του σχεδιασμού. Τέλος, προκειμένου να αντιμετωπισθεί η αυξημένη πολυπλοκότητα στα σχεδιαστικά εργαλεία επαναδιαμορφούμενων συστημάτων, προτείνονται νέοι εξελικτικοί αλγόριθμοι πολυκριτηριακής βελτιστοποίησης, οι οποίοι εκμεταλλευόμενοι τους σύγχρονους πολυπύρηνους επεξεργαστές και την αδρομερή φύση των πολυνηματικών περιβαλλόντων προγραμματισμού (π.χ. OpenMP), μειώνουν το χρόνο επίλυσης του προβλήματος της τοποθέτησης των λογικών πόρων σε φυσικούς,ενώ ταυτόχρονα, ομαδοποιώντας τις εφαρμογές βάση των εγγενών χαρακτηριστικών τους, διερευνούν αποτελεσματικότερα το χώρο σχεδίασης.Η αποδοτικότητά των προτεινόμενων αρχιτεκτονικών προτύπων και μεθοδολογιών επαληθεύτηκε σε σχέση με τις υφιστάμενες λύσεις αιχμής τόσο σε αυτοτελής εφαρμογές, όπως η ψηφιακή επεξεργασία σήματος, τα πολυμέσα και τα προβλήματα αριθμητικής πολυπλοκότητας, καθώς και σε συστημικά ετερογενή περιβάλλοντα, όπως ένα σύστημα όρασης υπολογιστών για αυτόνομα διαστημικά ρομποτικά οχήματα και ένα σύστημα πολλαπλών επιταχυντών υλικού για σταθμούς εργασίας και κέντρα δεδομένων, στοχεύοντας εφαρμογές υψηλής υπολογιστικής απόδοσης (HPC). Τα αποτελέσματα ενισχύουν την πεποίθηση του γράφοντα, ότι η παρούσα διατριβή παρέχει ανταγωνιστική τεχνογνωσία για την αντιμετώπιση των πολύπλοκων σύγχρονων και προβλεπόμενα μελλοντικών σχεδιαστικών προκλήσεων

Understanding Soft Errors in Uncore Components

The effects of soft errors in processor cores have been widely studied. However, little has been published about soft errors in uncore components, such as memory subsystem and I/O controllers, of a System-on-a-Chip (SoC). In this work, we study how soft errors in uncore components affect system-level behaviors. We have created a new mixed-mode simulation platform that combines simulators at two different levels of abstraction, and achieves 20,000x speedup over RTL-only simulation. Using this platform, we present the first study of the system-level impact of soft errors inside various uncore components of a large-scale, multi-core SoC using the industrial-grade, open-source OpenSPARC T2 SoC design. Our results show that soft errors in uncore components can significantly impact system-level reliability. We also demonstrate that uncore soft errors can create major challenges for traditional system-level checkpoint recovery techniques. To overcome such recovery challenges, we present a new replay recovery technique for uncore components belonging to the memory subsystem. For the L2 cache controller and the DRAM controller components of OpenSPARC T2, our new technique reduces the probability that an application run fails to produce correct results due to soft errors by more than 100x with 3.32% and 6.09% chip-level area and power impact, respectively.Comment: to be published in Proceedings of the 52nd Annual Design Automation Conferenc