Unsupervised Contact Learning for Humanoid Estimation and Control

This work presents a method for contact state estimation using fuzzy clustering to learn contact probability for full, six-dimensional humanoid contacts. The data required for training is solely from proprioceptive sensors - endeffector contact wrench sensors and inertial measurement units (IMUs) - and the method is completely unsupervised. The resulting cluster means are used to efficiently compute the probability of contact in each of the six endeffector degrees of freedom (DoFs) independently. This clustering-based contact probability estimator is validated in a kinematics-based base state estimator in a simulation environment with realistic added sensor noise for locomotion over rough, low-friction terrain on which the robot is subject to foot slip and rotation. The proposed base state estimator which utilizes these six DoF contact probability estimates is shown to perform considerably better than that which determines kinematic contact constraints purely based on measured normal force.Comment: Submitted to the IEEE International Conference on Robotics and Automation (ICRA) 201

Unsupervised Contact Learning for Humanoid Estimation and Control

This work presents a method for contact state estimation using fuzzy clustering to learn contact probability for full, six-dimensional humanoid contacts. The data required for training is solely from proprioceptive sensors - endeffector contact wrench sensors and inertial measurement units (IMUs) - and the method is completely unsupervised. The resulting cluster means are used to efficiently compute the probability of contact in each of the six endeffector degrees of freedom (DoFs) independently. This clustering-based contact probability estimator is validated in a kinematics-based base state estimator in a simulation environment with realistic added sensor noise for locomotion over rough, low-friction terrain on which the robot is subject to foot slip and rotation. The proposed base state estimator which utilizes these six DoF contact probability estimates is shown to perform considerably better than that which determines kinematic contact constraints purely based on measured normal force.Comment: Submitted to the IEEE International Conference on Robotics and Automation (ICRA) 201

Versatile Multi-Contact Planning and Control for Legged Loco-Manipulation

Loco-manipulation planning skills are pivotal for expanding the utility of robots in everyday environments. These skills can be assessed based on a system's ability to coordinate complex holistic movements and multiple contact interactions when solving different tasks. However, existing approaches have been merely able to shape such behaviors with hand-crafted state machines, densely engineered rewards, or pre-recorded expert demonstrations. Here, we propose a minimally-guided framework that automatically discovers whole-body trajectories jointly with contact schedules for solving general loco-manipulation tasks in pre-modeled environments. The key insight is that multi-modal problems of this nature can be formulated and treated within the context of integrated Task and Motion Planning (TAMP). An effective bilevel search strategy is achieved by incorporating domain-specific rules and adequately combining the strengths of different planning techniques: trajectory optimization and informed graph search coupled with sampling-based planning. We showcase emergent behaviors for a quadrupedal mobile manipulator exploiting both prehensile and non-prehensile interactions to perform real-world tasks such as opening/closing heavy dishwashers and traversing spring-loaded doors. These behaviors are also deployed on the real system using a two-layer whole-body tracking controller

Navigation Among Movable Obstacles via Multi-Object Pushing Into Storage Zones

With the majority of mobile robot path planning methods being focused on obstacle avoidance, this paper, studies the problem of Navigation Among Movable Obstacles (NAMO) in an unknown environment, with static (i.e., that cannot be moved by a robot) and movable (i.e., that can be moved by a robot) objects. In particular, we focus on a specific instance of the NAMO problem in which the obstacles have to be moved to predefined storage zones. To tackle this problem, we propose an online planning algorithm that allows the robot to reach the desired goal position while detecting movable objects with the objective to push them towards storage zones to shorten the planned path. Moreover, we tackle the challenging problem where an obstacle might block the movability of another one, and thus, a combined displacement plan needs to be applied. To demonstrate the new algorithm's correctness and efficiency, we report experimental results on various challenging path planning scenarios. The presented method has significantly better time performance than the baseline, while also introducing multiple novel functionalities for the NAMO problem

Cognitive Task Planning for Smart Industrial Robots

This research work presents a novel Cognitive Task Planning framework for Smart Industrial Robots. The framework makes an industrial mobile manipulator robot Cognitive by applying Semantic Web Technologies. It also introduces a novel Navigation Among Movable Obstacles algorithm for robots navigating and manipulating inside a firm. The objective of Industrie 4.0 is the creation of Smart Factories: modular firms provided with cyber-physical systems able to strong customize products under the condition of highly flexible mass-production. Such systems should real-time communicate and cooperate with each other and with humans via the Internet of Things. They should intelligently adapt to the changing surroundings and autonomously navigate inside a firm while moving obstacles that occlude free paths, even if seen for the first time. At the end, in order to accomplish all these tasks while being efficient, they should learn from their actions and from that of other agents. Most of existing industrial mobile robots navigate along pre-generated trajectories. They follow ectrified wires embedded in the ground or lines painted on th efloor. When there is no expectation of environment changes and cycle times are critical, this planning is functional. When workspaces and tasks change frequently, it is better to plan dynamically: robots should autonomously navigate without relying on modifications of their environments. Consider the human behavior: humans reason about the environment and consider the possibility of moving obstacles if a certain goal cannot be reached or if moving objects may significantly shorten the path to it. This problem is named Navigation Among Movable Obstacles and is mostly known in rescue robotics. This work transposes the problem on an industrial scenario and tries to deal with its two challenges: the high dimensionality of the state space and the treatment of uncertainty. The proposed NAMO algorithm aims to focus exploration on less explored areas. For this reason it extends the Kinodynamic Motion Planning by Interior-Exterior Cell Exploration algorithm. The extension does not impose obstacles avoidance: it assigns an importance to each cell by combining the efforts necessary to reach it and that needed to free it from obstacles. The obtained algorithm is scalable because of its independence from the size of the map and from the number, shape, and pose of obstacles. It does not impose restrictions on actions to be performed: the robot can both push and grasp every object. Currently, the algorithm assumes full world knowledge but the environment is reconfigurable and the algorithm can be easily extended in order to solve NAMO problems in unknown environments. The algorithm handles sensor feedbacks and corrects uncertainties. Usually Robotics separates Motion Planning and Manipulation problems. NAMO forces their combined processing by introducing the need of manipulating multiple objects, often unknown, while navigating. Adopting standard precomputed grasps is not sufficient to deal with the big amount of existing different objects. A Semantic Knowledge Framework is proposed in support of the proposed algorithm by giving robots the ability to learn to manipulate objects and disseminate the information gained during the fulfillment of tasks. The Framework is composed by an Ontology and an Engine. The Ontology extends the IEEE Standard Ontologies for Robotics and Automation and contains descriptions of learned manipulation tasks and detected objects. It is accessible from any robot connected to the Cloud. It can be considered a data store for the efficient and reliable execution of repetitive tasks; and a Web-based repository for the exchange of information between robots and for the speed up of the learning phase. No other manipulation ontology exists respecting the IEEE Standard and, regardless the standard, the proposed ontology differs from the existing ones because of the type of features saved and the efficient way in which they can be accessed: through a super fast Cascade Hashing algorithm. The Engine lets compute and store the manipulation actions when not present in the Ontology. It is based on Reinforcement Learning techniques that avoid massive trainings on large-scale databases and favors human-robot interactions. The overall system is flexible and easily adaptable to different robots operating in different industrial environments. It is characterized by a modular structure where each software block is completely reusable. Every block is based on the open-source Robot Operating System. Not all industrial robot controllers are designed to be ROS-compliant. This thesis presents the method adopted during this research in order to Open Industrial Robot Controllers and create a ROS-Industrial interface for them

Humanoid Robots

For many years, the human being has been trying, in all ways, to recreate the complex mechanisms that form the human body. Such task is extremely complicated and the results are not totally satisfactory. However, with increasing technological advances based on theoretical and experimental researches, man gets, in a way, to copy or to imitate some systems of the human body. These researches not only intended to create humanoid robots, great part of them constituting autonomous systems, but also, in some way, to offer a higher knowledge of the systems that form the human body, objectifying possible applications in the technology of rehabilitation of human beings, gathering in a whole studies related not only to Robotics, but also to Biomechanics, Biomimmetics, Cybernetics, among other areas. This book presents a series of researches inspired by this ideal, carried through by various researchers worldwide, looking for to analyze and to discuss diverse subjects related to humanoid robots. The presented contributions explore aspects about robotic hands, learning, language, vision and locomotion