934 research outputs found
Low Power Processor Architectures and Contemporary Techniques for Power Optimization – A Review
The technological evolution has increased the number of transistors for a given die area significantly and increased the switching speed from few MHz to GHz range. Such inversely proportional decline in size and boost in performance consequently demands shrinking of supply voltage and effective power dissipation in chips with millions of transistors. This has triggered substantial amount of research in power reduction techniques into almost every aspect of the chip and particularly the processor cores contained in the chip. This paper presents an overview of techniques for achieving the power efficiency mainly at the processor core level but also visits related domains such as buses and memories. There are various processor parameters and features such as supply voltage, clock frequency, cache and pipelining which can be optimized to reduce the power consumption of the processor. This paper discusses various ways in which these parameters can be optimized. Also, emerging power efficient processor architectures are overviewed and research activities are discussed which should help reader identify how these factors in a processor contribute to power consumption. Some of these concepts have been already established whereas others are still active research areas. © 2009 ACADEMY PUBLISHER
High level synthesis of RDF queries for graph analytics
In this paper we present a set of techniques that enable the synthesis of efficient custom accelerators for memory intensive, irregular applications. To address the challenges of irregular applications (large memory footprint, unpredictable fine-grained data accesses, and high synchronization intensity), and exploit their opportunities (thread level parallelism, memory level parallelism), we propose a novel accelerator design that employs an adaptive and Distributed Controller (DC) architecture, and a Memory Interface Controller (MIC) that supports concurrent and atomic memory operations on a multi-ported/multi-banked shared memory. Among the multitude of algorithms that may benefit from our solution, we focus on the acceleration of graph analytics applications and, in particular, on the synthesis of SPARQL queries on Resource Description Framework (RDF) databases. We achieve this objective by incorporating the synthesis techniques into Bambu, an Open Source high-level synthesis tools, and interfacing it with GEMS, the Graph database Engine for Multithreaded Systems. The GEMS' front-end generates optimized C implementations of the input queries, modeled as graph pattern matching algorithms, which are then automatically synthesized by Bambu. We validate our approach by synthesizing several SPARQL queries from the Lehigh University Benchmark (LUBM)
Proceedings of the Second International Workshop on HyperTransport Research and Applications (WHTRA2011)
Proceedings of the Second International Workshop on HyperTransport Research and Applications (WHTRA2011) which was held Feb. 9th 2011 in Mannheim, Germany. The Second International Workshop for Research on HyperTransport is an international high quality forum for scientists, researches and developers working in the area of HyperTransport. This includes not only developments and research in HyperTransport itself, but also work which is based on or enabled by HyperTransport. HyperTransport (HT) is an interconnection technology which is typically used as system interconnect in modern computer systems, connecting the CPUs among each other and with the I/O bridges. Primarily designed as interconnect between high performance CPUs it provides an extremely low latency, high bandwidth and excellent scalability. The definition of the HTX connector allows the use of HT even for add-in cards. In opposition to other peripheral interconnect technologies like PCI-Express no protocol conversion or intermediate bridging is necessary. HT is a direct connection between device and CPU with minimal latency. Another advantage is the possibility of cache coherent devices. Because of these properties HT is of high interest for high performance I/O like networking and storage, but also for co-processing and acceleration based on ASIC or FPGA technologies. In particular acceleration sees a resurgence of interest today. One reason is the possibility to reduce power consumption by the use of accelerators. In the area of parallel computing the low latency communication allows for fine grain communication schemes and is perfectly suited for scalable systems. Summing up, HT technology offers key advantages and great performance to any research aspect related to or based on interconnects. For more information please consult the workshop website (http://whtra.uni-hd.de)
BRAHMS: Novel middleware for integrated systems computation
Biological computational modellers are becoming increasingly interested in building large, eclectic models, including components on many different computational substrates, both biological and non-biological. At the same time, the rise of the philosophy of embodied modelling is generating a need to deploy biological models as controllers for robots in real-world environments. Finally, robotics engineers are beginning to find value in seconding biomimetic control strategies for use on practical robots. Together with the ubiquitous desire to make good on past software development effort, these trends are throwing up new challenges of intellectual and technological integration (for example across scales, across disciplines, and even across time) - challenges that are unmet by existing software frameworks. Here, we outline these challenges in detail, and go on to describe a newly developed software framework, BRAHMS. that meets them. BRAHMS is a tool for integrating computational process modules into a viable, computable system: its generality and flexibility facilitate integration across barriers, such as those described above, in a coherent and effective way. We go on to describe several cases where BRAHMS has been successfully deployed in practical situations. We also show excellent performance in comparison with a monolithic development approach. Additional benefits of developing in the framework include source code self-documentation, automatic coarse-grained parallelisation, cross-language integration, data logging, performance monitoring, and will include dynamic load-balancing and 'pause and continue' execution. BRAHMS is built on the nascent, and similarly general purpose, model markup language, SystemML. This will, in future, also facilitate repeatability and accountability (same answers ten years from now), transparent automatic software distribution, and interfacing with other SystemML tools. (C) 2009 Elsevier Ltd. All rights reserved
A Survey and Evaluation of FPGA High-Level Synthesis Tools
High-level synthesis (HLS) is increasingly popular for the design of high-performance and energy-efficient heterogeneous systems, shortening time-to-market and addressing today's system complexity. HLS allows designers to work at a higher-level of abstraction by using a software program to specify the hardware functionality. Additionally, HLS is particularly interesting for designing field-programmable gate array circuits, where hardware implementations can be easily refined and replaced in the target device. Recent years have seen much activity in the HLS research community, with a plethora of HLS tool offerings, from both industry and academia. All these tools may have different input languages, perform different internal optimizations, and produce results of different quality, even for the very same input description. Hence, it is challenging to compare their performance and understand which is the best for the hardware to be implemented. We present a comprehensive analysis of recent HLS tools, as well as overview the areas of active interest in the HLS research community. We also present a first-published methodology to evaluate different HLS tools. We use our methodology to compare one commercial and three academic tools on a common set of C benchmarks, aiming at performing an in-depth evaluation in terms of performance and the use of resources
High-Level Annotation of Routing Congestion for Xilinx Vivado HLS Designs
Ever since transistor cost stopped decreasing, customized programmable platforms, such as field-programmable gate arrays (FPGAs), became a major way to improve software execution performance and energy consumption. While software developers can use high-level synthesis (HLS) to speed up register-transfer level (RTL) code generation from C++ or OpenCL source code, placement and routing issues, such as congestion, can still prevent achieving an FPGA programming bitstream or dramatically reduce the FPGA implementation performance. Congestion reports from physical design tools refer to thousands of RTL signal names instead of developer-accessible identifiers and statements, considerably complicating the developer understanding and resolution of the issues at the source level. We propose a high-level back-annotation flow that summarizes the routing congestion issues at the source level by analyzing the reports from the FPGA physical design tools and the internal debugging files of the HLS tools. Our flow describes congestion using comments back-annotated on the source code and identifies if the congestion causes are the on-chip memories or the DSP units (multipliers/adders), which are the shared resources very often associated with routing problems on FPGAs. We demonstrate on realistic large designs how the information provided by our flow helps to quickly spot congestion causes at the source level and to solve them using appropriate HLS directives
High-level synthesis of triple modular redundant FPGA circuits with energy efficient error recovery mechanisms
There is a growing interest in deploying commercial SRAM-based Field Programmable Gate Array (FPGA) circuits in space due to their low cost, reconfigurability, high logic capacity and rich I/O interfaces. However, their configuration memory (CM) is vulnerable to ionising radiation which raises the need for effective fault-tolerant design techniques. This thesis provides the following contributions to mitigate the negative effects of soft errors in SRAM FPGA circuits.
Triple Modular Redundancy (TMR) with periodic CM scrubbing or Module-based CM error recovery (MER) are popular techniques for mitigating soft errors in FPGA circuits. However, this thesis shows that MER does not recover CM soft errors in logic instantiated outside the reconfigurable regions of TMR modules. To address this limitation, a hybrid error recovery mechanism, namely FMER, is proposed. FMER uses selective periodic scrubbing and MER to recover CM soft errors inside and outside the reconfigurable regions of TMR modules, respectively. Experimental results indicate that TMR circuits with FMER achieve higher dependability with less energy consumption than those using periodic scrubbing or MER alone.
An imperative component of MER and FMER is the reconfiguration control network (RCN) that transfers the minority reports of TMR components, i.e., which, if any, TMR module needs recovery, to the FPGA's reconfiguration controller (RC). Although several reliable RCs have been proposed, a study of reliable RCNs has not been previously reported. This thesis fills this research gap, by proposing a technique that transfers the circuit's minority reports to the RC via the configuration-layer of the FPGA. This reduces the resource utilisation of the RCN and therefore its failure rate. Results show that the proposed RCN achieves higher reliability than alternative RCN architectures reported in the literature.
The last contribution of this thesis is a high-level synthesis (HLS) tool, namely TLegUp, developed within the LegUp HLS framework. TLegUp triplicates Xilinx 7-series FPGA circuits during HLS rather than during the register-transfer level pre- or post-synthesis flow stage, as existing computer-aided design tools do. Results show that TLegUp can generate non-partitioned TMR circuits with 500x less soft error sensitivity than non-triplicated functional equivalent baseline circuits, while utilising 3-4x more resources and having 11% lower frequency
Recommended from our members
Machine Learning for AI-Augmented Design Space Exploration of Computer Systems
Advanced and emerging computer systems, ranging from supercomputers to embedded systems, feature high performance, energy efficiency, acceleration, and specialization. Design of such systems involves ever-increasing circuit complexity and architectural diversity. Commercial high-end processors, realized as very-large-scale integration circuits, have integrated exponentially increasing number of transistors on a chip over many decades. Along with the evolution of semiconductor manufacturing technology, another driving force behind the progress of processors has been the development of computer-aided design (CAD) software tools. Logic synthesis and physical design (LSPD) tool-chains allow designers to describe the computer system at the register-transfer level of abstraction and automatically convert the description into an integration circuit layout. The slowdown of technology scaling, on the other hand, has motivated the emergence of dark silicon and heterogeneous architectures with application-specific hardware accelerators. Design of various accelerators is facilitated by high-level synthesis (HLS) tools that translate a behavioral description of a computer system into a structural register-transfer level one. CAD approaches have evolved towards raising the level of design abstraction and providing more options to optimize the architecture.
For each system synthesized via advanced CAD tools, designers explore the design space in search of optimal configurations of the tool options and architectural choices, also called . These knobs affect the execution of CAD algorithms and eventually impact the multi-dimensional -- () of the final implementation. During design-space exploration (DSE), designers leverage their experience and expertise pertaining to determining the relationship between knobs and QoR. To further reduce the number of time and resource consuming CAD runs during DSE, a large number of heuristic and model-based approaches have been proposed. More recently, the rise of machine learning (ML) and artificial intelligence (AI) has prompted the possibility of AI-augmented DSE which exploits ML techniques to predict the knobs-QoR relationship. Yet, existing heuristic and ML-based approaches still require a sufficient number of CAD runs for each system because they do not accumulate and exploit experiential knowledge across the systems as designers would do.
To expand the potential of AI-augmented DSE and push the frontier forward, multiple challenges arise due to the characteristics of CAD flows. 1) Whereas many ML applications utilize data obtained from huge collections of users' input and public databases for a single problem, the QoR-prediction problem for each system suffers from limited availability of data obtained from expensive CAD runs. Especially, an industrial LSPD tool-chain specifies hundreds of separate knobs, resulting in an extreme curse of dimensionality. 2) Different systems exhibit different knobs-QoR relationship. Hence, learning from previously explored systems needs to be preceded by identifying distinct systems and relating them to one another. Often, it is difficult to obtain an efficient representation of a system. 3) Designers often apply different sets of knob configurations to different systems, which makes it harder to learn from previous DSE results. Especially in HLS, the heterogeneity of various systems leads to broad knob heterogeneity across them. To address these challenges and boost the ML performance, I propose to flexibly connect the elements of the many QoR-prediction problems with one another. My thesis is that .
For LSPD of industrial high-performance processors, I propose a novel collaborative recommender system approach that learns hidden features from the interactions (CAD runs) of many \textit{users} (systems) and \textit{items} (knob configurations). To cope with the curse of dimensionality, the item features are decomposed into features of item attributes (knobs). The combined model predicts QoR for each user-item pair. For HLS of application-specific accelerators, I present a series of neural network models in the order of evolution towards the proposed mixed-sharing \textit{transfer learning} model. Transfer learning aims at leveraging knowledge gained from previous problems; however, due to the system and knob heterogeneities, the model needs to distinguish which piece of that knowledge should be transferred. The proposed ML approaches aim to not only use experiential knowledge as designers do but also to ultimately assist designers by providing alternative insights and suggesting optimization possibilities for new systems. As an effort in this direction, I develop an AI-augmented DSE tool that exploits the aforementioned models and \textit{generates} recommended knob configurations for new target systems. Through this research, I investigate the potential of next-level AI-augmented DSE with the goal of promoting secure collaborative engineering in the CAD community without the need of sharing confidential information and intellectual properties
- …