9,986 research outputs found
Passive-performance, analysis, and upgrades of a 1-ton seismic attenuation system
The 10m Prototype facility at the Albert-Einstein-Institute (AEI) in Hanover,
Germany, employs three large seismic attenuation systems to reduce mechanical
motion. The AEI Seismic-Attenuation-System (AEI-SAS) uses mechanical
anti-springs in order to achieve resonance frequencies below 0.5Hz. This system
provides passive isolation from ground motion by a factor of about 400 in the
horizontal direction at 4Hz and in the vertical direction at 9Hz. The presented
isolation performance is measured under vacuum conditions using a combination
of commercial and custom-made inertial sensors. Detailed analysis of this
performance led to the design and implementation of tuned dampers to mitigate
the effect of the unavoidable higher order modes of the system. These dampers
reduce RMS motion substantially in the frequency range between 10 and 100Hz in
6 degrees of freedom. The results presented here demonstrate that the AEI-SAS
provides substantial passive isolation at all the fundamental mirror-suspension
resonances
Recommended from our members
Developing and evaluating a hybrid wind instrument
A hybrid wind instrument generates self-sustained sounds via a real-time interaction between a computed excitation model (such as the physical model of human lips interacting with a mouthpiece) and a real acoustic resonator. Attempts to produce a hybrid instrument have so far fallen short, in terms of both the accuracy and the variation in the sound produced. The principal reason for the failings of previous hybrid instruments is the actuator which, controlled by the excitation model, introduces a fluctuating component into the air flow injected into the resonator. In the present paper, the possibility of using a loudspeaker to supply the calculated excitation signal is evaluated. A theoretical study has facilitated the modeling of the loudspeaker-resonator system and the design of a feedback and feedforward filter to successfully compensate for the presence of the loudspeaker. The resulting self-sustained sounds are evaluated by a mapping of their sound descriptors to the input parameters of the physical model of the embouchure, both for sustained and attack sounds. Results are compared with simulations. The largely coherent functioning confirms the usefulness of the device in both musical and research contexts
Wobbling of a liquid column between unequal discs
One of the most puzzling results of an experiment on the stability of long liquid columns under microgravity, performed aboard Spacelab-D2 in 1993 and named STACO, aiming at the analysis of deformations of nearly cylindrical liquid columns under several mechanical disturbances, is revisited here. It corresponds to the unexplained breakage of an 85 mm long liquid bridge of low viscosity silicone oil, established between unequal discs of 30 and 28 mm, intended to counterbalance the expected deformation by residual acceleration found in previous flights, and left idle because the vibrations and oscillations to be applied afterwards were not started, for fear of premature breakage. A detailed image analysis is performed to extract the maximum amount of data, to be able to check against available theories for axisymmetric and non-axisymmetric deformations of a liquid column
Polar communications: Status and recommendations. Report of the Science Working Group
The capabilities of the existing communication links within the polar regions, as well as between the polar regions and the continental United States, are summarized. These capabilities are placed in the context of the principal scientific disciplines that are active in polar research, and in the context of how scientists both utilize and are limited by present technologies. Based on an assessment of the scientific objectives potentially achievable with improved communication capabilities, a list of requirements on and recommendations for communication capabilities necessary to support polar science over the next ten years is given
Design, fabrication, and operation of two broadband force balance seismometers
The measurement of ground motion is important for a wide range of fields. In physics, advanced experiments can involve precise positioning of components. In civil engineering, engineers need to know the characteristics of ground motion to better design large scale structures, and the study of ground motion form distant earth quakes help geologists understand the structure and dynamics of the earth. Each application requires instruments of different specifications. In this thesis I describe the design, fabrication, assembly, and operation of two broad band force balance seismometers and the associated control software. The design, control elements, and methods used in this project can be extended to other applications were specific criteria are needed in the development of custom seismic sensors. A proportional, integral, and derivative (PID) control scheme was written for the negative feedback loop. Along with the control software, I include a user interface to control the feedback and assist in loop tuning. Closed loop operation of each seismometer was successfully accomplished and the step responses were compared to the step response of an ideal model of the seismometers developed in software. Three parameters are useful in the description of a step response: the settling time, overshoot, and deadtime. The ideal model step response has a settling time of 0.09 seconds and an overshoot of less than 30%. The seismometers exhibit settling times of 1 second and 0.5 seconds and overshoots of 20% and 10%. The ideal model does not exhibit a deadtime but the actual seismometer deadtime was just 30 ms
A preliminary study of asymmetric vocal fold vibrations: modeling and "in-vitro" validation
This paper deals with some of aspects of the influence of asymmetry on vocal
folds vibrations. A theoretical model of vocal fold asymmetry is presented. The
influence of asymmetry is quantitatively examined in terms of oscillation
frequency and pressure threshold. The theoretical model is compared to
"in-vitro" experiment on a deformable replica of vocal folds. It is found that
asymmetry strongly influences the oscillation subglottal pressure threshold.
Moreover, the vocal fold with the highest mechanical resonance frequency
imposes the oscillation fundamental frequency. The influence of geometrical
asymmetry instead of purely mechanical asymmetry is show
Multisensory causal inference in the brain
At any given moment, our brain processes multiple inputs from its different sensory modalities (vision, hearing, touch, etc.). In deciphering this array of sensory information, the brain has to solve two problems: (1) which of the inputs originate from the same object and should be integrated and (2) for the sensations originating from the same object, how best to integrate them. Recent behavioural studies suggest that the human brain solves these problems using optimal probabilistic inference, known as Bayesian causal inference. However, how and where the underlying computations are carried out in the brain have remained unknown. By combining neuroimaging-based decoding techniques and computational modelling of behavioural data, a new study now sheds light on how multisensory causal inference maps onto specific brain areas. The results suggest that the complexity of neural computations increases along the visual hierarchy and link specific components of the causal inference process with specific visual and parietal regions
- …