Performance Analysis and Design of Mobile Ad-Hoc Networks

We focus on the performance analysis and design of a wireless ad-hoc network using a virtual-circuit or reservation based medium access layer. In a reservation based MAC network, source nodes reserve a session's link capacity end-to-end over the entire path before sending traffic over the established path. An example of a generic reservation based MAC protocol is Unifying Slot Assignment Protocol (USAP). Any reservation based medium access protocol (including USAP) uses a simple set of rules to determine the cells or timeslots available at a node to reserve link capacity along the path to the next node. Given inputs of node locations, traffic pattern between nodes and link propagation matrices, we develop models to estimate blocking probability and throughput for reservation based wireless ad-hoc networks. These models are based on extending reduced load loss network models for a wireless network. For generic USAP with multiple frequency channels, the key effect of multiuser interference on a link is modeled via reduced available link capacity where the effects of transmissions and receptions in the link neighborhood are modeled using USAP reservation rules. We compare our results with simulation and obtain good results using our extended reduced load loss network models but with reduced available link capacity distribution obtained by simulation. For the case of generic USAP using a single frequency channel, we develop models for unicast traffic using reduced load loss network models but with the sharing of the wireless medium between a node and its neighbors modeled by considering cliques of neighboring interfering links around a particular link. We compare results of this model with simulation and show good match. We also develop models to calculate source-destination throughput for the reservation MAC as used in the Joint Tactical Radio System to support both unicast and multicast traffic. These models are based on extending reduced load loss network models for wireless multicast traffic with the sharing of the wireless medium between a node and its (upto 2 hop) neighbors modeled by considering cliques of interfering nodes around a particular node. We compare results of this model with simulation and show good match with simulation. Once we have developed models to estimate throughput and blocking probabilities, we use these models to optimize total network throughput. In order to optimize total throughput, we compute throughput sensitivities of the reduced load loss network model using an implied cost formulation and use these sensitivities to choose the routing probabilities among multiple paths so that total network throughput is maximized. In any network scenario, MANETs can get disconnected into clusters. As part of the MANET design problem, we look at the problem of establishing network connectivity and satisfying required traffic capacity between disconnected clusters by placing a minimum number of advantaged high flying Aerial Platforms (APs) as relay nodes at appropriate places. We also extend the connectivity solution in order to make the network single AP survivable. The problem of providing both connectivity and required capacity between disconnected ground clusters (which contain nodes that can communicate directly with each other) is formulated as a summation-form clustering problem of the ground clusters with the APs along with inter-AP distance constraints that make the AP network connected and with complexity costs that take care of ground cluster to AP capacity constraints. The resultant clustering problem is solved using Deterministic Annealing to find (near) globally optimal solutions for the minimum number and locations of the APs to establish connectivity and provide required traffic capacity between disconnected clusters. The basic connectivity constraints are extended to include conditions that make the resultant network survivable to a single AP failure. In order to make the network single AP survivable, we extend the basic connectivity solution by adding another summation form constraint so that the AP network forms a biconnected network and also by making sure that each ground cluster is connected to atleast two APs. We establish the validity of our algorithms by comparing them with optimal exhaustive search algorithms and show that our algorithms are near-optimal for the problem of establishing connectivity between disconnected clusters

Distributed synchronization algorithms for wireless sensor networks

The ability to distribute time and frequency among a large population of interacting agents is of interest for diverse disciplines, inasmuch as it enables to carry out complex cooperative tasks. In a wireless sensor network (WSN), time/frequency synchronization allows the implementation of distributed signal processing and coding techniques, and the realization of coordinated access to the shared wireless medium. Large multi-hop WSN\u27s constitute a new regime for network synchronization, as they call for the development of scalable, fully distributed synchronization algorithms. While most of previous research focused on synchronization at the application layer, this thesis considers synchronization at the lowest layers of the communication protocol stack of a WSN, namely the physical and the medium access control (MAC) layer. At the physical layer, the focus is on the compensation of carrier frequency offsets (CFO), while time synchronization is studied for application at the MAC layer. In both cases, the problem of realizing network-wide synchronization is approached by employing distributed clock control algorithms based on the classical concept of coupled phase and frequency locked loops (PLL and FLL). The analysis takes into account communication, signaling and energy consumption constraints arising in the novel context of multi-hop WSN\u27s. In particular, the robustness of the algorithms is checked against packet collision events, infrequent sync updates, and errors introduced by different noise sources, such as transmission delays and clock frequency instabilities. By observing that WSN\u27s allow for greater flexibility in the design of the synchronization network architecture, this work examines also the relative merits of both peer-to-peer (mutually coupled - MC) and hierarchical (master-slave - MS) architectures. With both MC and MS architectures, synchronization accuracy degrades smoothly with the network size, provided that loop parameters are conveniently chosen. In particular, MS topologies guarantee faster synchronization, but they are hindered by higher noise accumulation, while MC topologies allow for an almost uniform error distribution at the price of much slower convergence. For all the considered cases, synchronization algorithms based on adaptive PLL and FLL designs are shown to provide robust and scalable network-wide time and frequency distribution in a WSN

Design and Implementation of Large-Scale Wireless Sensor Networks for Environmental Monitoring Applications

Environmental monitoring represents a major application domain for wireless sensor networks (WSN). However, despite significant advances in recent years, there are still many challenging issues to be addressed to exploit the full potential of the emerging WSN technology. In this dissertation, we introduce the design and implementation of low-power wireless sensor networks for long-term, autonomous, and near-real-time environmental monitoring applications. We have developed an out-of-box solution consisting of a suite of software, protocols and algorithms to provide reliable data collection with extremely low power consumption. Two wireless sensor networks based on the proposed solution have been deployed in remote field stations to monitor soil moisture along with other environmental parameters. As parts of the ever-growing environmental monitoring cyberinfrastructure, these networks have been integrated into the Texas Environmental Observatory system for long-term operation. Environmental measurement and network performance results are presented to demonstrate the capability, reliability and energy-efficiency of the network

Performance Optimization in Wireless Local Area Networks

Wireless Local Area Networks (WLAN) are becoming more and more important for providing wireless broadband access. Applications and networking scenarios evolve continuously and in an unpredictable way, attracting the attention of academic institutions, research centers and industry. For designing an e cient WLAN is necessary to carefully plan coverage and to optimize the network design parameters, such as AP locations, channel assignment, power allocation, MAC protocol, routing algorithm, etc... In this thesis we approach performance optimization in WLAN at di erent layer of the OSI model. Our rst approach is at Network layer. Starting from a Hybrid System modeling the ow of tra c in the network, we propose a Hybrid Linear Varying Parameter algorithm for identifying the link quality that could be used as metric in routing algorithms. Go down to Data Link, it is well known that CSMA (Carrier Sense Multiple Access) protocols exhibit very poor performance in case of multi-hop transmissions, because of inter-link interference due to imperfect carrier sensing. We propose two novel algorithms, that are combining Time Division Multiple Access for grouping contending nodes in non-interfering sets with Carrier Sense Multiple Access for managing the channel access behind a set. In the rst solution, a game theoretical study of intra slot contention is introduced, in the second solution we apply an optimization algorithm to nd the optimal degree between contention and scheduling. Both the presented solutions improve the network performance with respect to CSMA and TDMA algorithms. Finally we analyze the network performance at Physical Layer. In case of WLAN, we can only use three orthogonal channels in an unlicensed spectrum, so the frequency assignments should be subject to frequent adjustments, according to the time-varying amount of interference which is not under the control of the provider. This problem make necessary the introduction of an automatic network planning solution, since a network administrator cannot continuously monitor and correct the interference conditions su ered in the network. We propose a novel protocol based on a distributed machine learning mechanism in which the nodes choose, automatically and autonomously in each time slot, the optimal channel for transmitting through a weighted combination of protocols