An On-line BIST RAM Architecture with Self Repair Capabilities

The emerging field of self-repair computing is expected to have a major impact on deployable systems for space missions and defense applications, where high reliability, availability, and serviceability are needed. In this context, RAM (random access memories) are among the most critical components. This paper proposes a built-in self-repair (BISR) approach for RAM cores. The proposed design, introducing minimal and technology-dependent overheads, can detect and repair a wide range of memory faults including: stuck-at, coupling, and address faults. The test and repair capabilities are used on-line, and are completely transparent to the external user, who can use the memory without any change in the memory-access protocol. Using a fault-injection environment that can emulate the occurrence of faults inside the module, the effectiveness of the proposed architecture in terms of both fault detection and repairing capability was verified. Memories of various sizes have been considered to evaluate the area-overhead introduced by this proposed architectur

A Control Framework for Autonomous Smart Grids for Space Power Applications

With the National Aeronautics and Space Administration's (NASA) rising interest in lunar surface operations and deep space exploration, there is a growing need to move from traditional ground-based mission operations to more autonomous vehicle level operations. In lunar surface operations, there are periods of time where communications with ground-based mission control could not occur, forcing vehicles and a lunar base to completely operate independent of the ground. For deep space exploration missions, communication latency times increase to greater than 15 minutes making real-time control of critical systems difficult, if not near impossible. These challenges are driving the need for an autonomous power control system that has the capability to manage power and energy. This will ensure that critical loads have the necessary power to support life systems and carry out critical mission objectives. This paper presents a flexible, hierarchical, distributed control methodology that enables autonomous operation of smart grids and can integrate into a higher level autonomous architecture

Fault-Tolerant FPGA-Based Systems

This paper presents a new approach to on-line fault tolerance via reconfiguration for the systems mapped onto field programmable gate arrays (FPGAs). The fault detection, based on self-checking technique, is introduced at application level; therefore our approach can detect the faults of configurable logic blocks (CLBs) and routing interconnections in the FPGAs concurrently with the normal system work. A grid of tiles is projected on the FPGA structure and a certain number of spare CLBs is reserved inside every tile. The number of spare CLBs per tile, which will be used as a backup upon detecting any faulty CLB, is estimated in accordance with the probability of failure. After locating the faulty CLBs, the faulty tile will be reconfigured with avoiding the faulty CLBs. Our proposed approach uses a combination of hardware and software redundancy. We assume that a module external to the FPGA controls automatically the reconfiguration process in addition to the diagnosis process (DIRC); typically this is an embedded microprocessor having some storage for the various tile configurations. We have implemented our approach using Xilinx Virtex FPGA. The DIRC code is written in JBits software tools. In response to a component failure this approach capitalizes on the unique reconfiguration capabilities of FPGAs and replaces the affected tile with a functionally equivalent one that does not rely on the faulty component. Unlike fixed structure fault-tolerance techniques for ASICs and microprocessors, this approach allows a single physical component to provide redundant backup for several types of components

Interconnect yield analysis and fault tolerance for field programmable gate arrays

Imperial Users onl

Prognostic Reasoner based adaptive power management system for a more electric aircraft

This research work presents a novel approach that addresses the concept of an adaptive power management system design and development framed in the Prognostics and Health Monitoring(PHM) perspective of an Electrical power Generation and distribution system(EPGS).PHM algorithms were developed to detect the health status of EPGS components which can accurately predict the failures and also able to calculate the Remaining Useful Life(RUL), and in many cases reconfigure for the identified system and subsystem faults. By introducing these approach on Electrical power Management system controller, we are gaining a few minutes lead time to failures with an accurate prediction horizon on critical systems and subsystems components that may introduce catastrophic secondary damages including loss of aircraft. The warning time on critical components and related system reconfiguration must permits safe return to landing as the minimum criteria and would enhance safety. A distributed architecture has been developed for the dynamic power management for electrical distribution system by which all the electrically supplied loads can be effectively controlled.A hybrid mathematical model based on the Direct-Quadrature (d-q) axis transformation of the generator have been formulated for studying various structural and parametric faults. The different failure modes were generated by injecting faults into the electrical power system using a fault injection mechanism. The data captured during these studies have been recorded to form a “Failure Database” for electrical system. A hardware in loop experimental study were carried out to validate the power management algorithm with FPGA-DSP controller. In order to meet the reliability requirements a Tri-redundant electrical power management system based on DSP and FPGA has been develope

Robust configurable system design with built-in self-healing

The new generations of SRAM-based FPGA (Field Programmable Gate Array) devices, built on nanometre technology, are the preferred choice for the implementation of reconfigurable computing platforms. However, their vulnerability to hard and soft errors is a major weakness to robust system design based on FPGAs. In this paper, a novel Built-In Self-Healing (BISH) methodology, based on modular redundancy and on selfreconfiguration, is proposed. A soft microprocessor core implemented in the FPGA is responsible for the management and execution of all the BISH procedures. Fault detection and diagnosis is followed by repairing actions, taking advantage of the self-configuration features. Meanwhile, modular redundancy assures that the system still works correctly. This approach leads to a robust system design able to assure high reliability, availability and data integrity

A Self Learning based Diagnosis of Faulty Configurable Logic Blocks (CLBs) in Field Programmable Gate Arrays (FPGA) Using Reconfiguration

In many areas of digital systems Field programmable gate arrays (FPGAs) are most important for designing. The main usesof FPGAs are, these are programmable, and faults can be easily diagnosed, once faulty locations are identified. The locationand identification of faults in FPGA has not yet been explored much. A methodology for the testing and diagnosis of faultsin FPGAs is presented based on automatic circuit reconfiguration. The proposed method imposes no hardware overhead.This method can also be used in fault-tolerant systems, in which a good functional circuit can be still mapped to a FPGAwith faulty elements, as long as the fault sites are known. The logic synthesis software assigns the Configurable Logic Block(CLB) resources without system designer intervention. It is very advantageous for the designer to understand certain CLBdetails, including the varying capabilities of the look-up tables (LUTs), the physical direction of the carry propagation, thenumber and distribution of the available flip-flops. FPGA consists of 25 Configurable Logic Blocks (CLB). Each CLB isassigned with an application. The inputs for CLB are applied from a file. There is also a fault file in which error CLBs arepresent. If there is error CLBs, those CLBs are replaced by the spare CLBs. Finally, the errors CLBs are corrected withproper inputs and modified bits are displayed. So efficiency is not reduced and configurability is done without replacing thefaulty components. This FPGA can tolerate not only single faults but also for multiple faults. The power analysis resultsprovided for fault free, stuck-at-1, stuck-at-0 faults in digital circuits validate the point that faulty circuits dissipates moreand hence draw more power.Key words: Configurable Logic Block (CLB), Power Dissipation, Fault Tolerance, Fault Diagnosis, Faults, Full adder (FA)

A Framework for implementing radiation-tolerant circuits on reconfigurable FPGAs

The outstanding versatility of SRAM-based FPGAs make them the preferred choice for implementing complex customizable circuits. To increase the amount of logic available, manufacturers are using nanometric technologies to boost logic density and reduce prices. However, the use of nanometric scales also makes FPGAs particularly vulnerable to radiation-induced faults, especially because of the increasing amount of configuration memory cells that are necessary to define their functionality. This paper describes a framework for implementing circuits immune to radiation-induced faults, based on a customized Triple Modular Redundancy (TMR) infrastructure and on a detection-and-fix controller. This controller is responsible for the detection of data incoherencies, location of the faulty module and restoration of the original configuration, without affecting the normal operation of the mission logic. A short survey of the most recent data published concerning the impact of radiation-induced faults in FPGAs is presented to support the assumptions underlying our proposed framework. A detailed explanation of the controller functionality is also provided, followed by an experimental case study

Restoring Reliability in Fault Tolerant Reconfigurable Systems

The new generations of SRAM-based FPGAdevices, built on nanometer technology, are thepreferred choice for the implementation ofreconfigurable computing platforms. However,smaller technological scales increase theirvulnerability to manufacturing imperfections andhence to the occurrence of electromigration.Moreover, the large internal RAM (for configurationpurposes or as embedded memory blocks) makesthem more prone to soft errors.The incorporation of self-reconfigurationcapabilities in recent FPGAs, allied to the use of softand hard microprocessor cores, facilitates the offsetof these vulnerabilities by enabling the developmentof self-restoring fault tolerant reconfigurablesystems. In the methodology presented in this paper,the embedded microprocessor is also responsible forthe implementation of online self-test-and-repairstrategies, based on modular redundancy and onself-reconfiguration. The detection of faults, causedby soft or hard errors, may be followed by repairingactions, depending on the fault type. This approachleads to smoother system degradation, extending itslifetime and improving its reliability