On-board electric vehicle battery charger with enhanced V2H operation mode

This paper proposes an on-board Electric Vehicle (EV) battery charger with enhanced Vehicle-to-Home (V2H) operation mode. For such purpose was adapted an on-board bidirectional battery charger prototype to allow the Grid-to-Vehicle (G2V), Vehicle-to-Grid (V2G) and V2H operation modes. Along the paper are presented the hardware topology and the control algorithms of this battery charger. The idea underlying to this paper is the operation of the on-board bidirectional battery charger as an energy backup system when occurs a power outages. For detecting the power outage were compared two strategies, one based on the half-cycle rms calculation of the power grid voltage, and another in the determination of the rms value based in a Kalman filter. The experimental results were obtained considering the on-board EV battery charger under the G2V, V2G, and V2H operation modes. The results show that the power outage detection is faster using a Kalman filter, up to 90% than the other strategy. This also enables a faster transition between operation modes when a power outage occurs.Fundação para a Ciência e Tecnologia (FCT), Project Scope: Pest OE/EEI/UI0319/20

Operation modes for the electric vehicle in smart grids and smart homes: present and proposed modes

This paper presents the main operation modes for an electric vehicle (EV) battery charger framed in smart grids and smart homes, i.e., are discussed the present-day and are proposed new operation modes that can represent an asset towards EV adoption. Besides the well-known grid to vehicle (G2V) and vehicle to grid (V2G), this paper proposes two new operation modes: Home-to-vehicle (H2V), where the EV battery charger current is controlled according to the current consumption of the electrical appliances of the home (this operation mode is combined with the G2V and V2G); Vehicle-for-grid (V4G), where the EV battery charger is used for compensating current harmonics or reactive power, simultaneously with the G2V and V2G operation modes. The vehicle-to-home (V2H) operation mode, where the EV can operate as a power source in isolated systems or as an off-line uninterruptible power supply to feed priority appliances of the home during power outages of the electrical grid is presented in this paper framed with the other operation modes. These five operation modes were validated through experimental results using a developed 3.6 kW bidirectional EV battery charger prototype, which was specially designed for these operation modes. The paper describes the developed EV battery charger prototype, detailing the power theory and the voltage and current control strategies used in the control system. The paper presents experimental results for the various operation modes, both in steady-state and during transients

Improved voltage control for the electric vehicle operation in V2H mode as an off-line UPS in the context of smart homes

As a contribution for sustainability, electric vehicles (EVs) are seen as one of the most effective influences in the transport sector. This paper proposes an improved voltage control of the EV operating as uninterruptible power supply (UPS) in smart homes. With the EV plugged-in into the smart home, it can act as an off-line UPS protecting the electrical appliances from power grid outages. The foremost advantages of the proposed voltage control strategy are comprehensively emphasized, establishing a comparison with the classical approach. Aiming to offer a sinusoidal voltage for linear and nonlinear electrical appliances, a pulse width modulation with a multi-loop control scheme is used. A Kalman filter is used for decreasing significantly the time of detecting power outages and, consequently, the transition for the UPS mode. The computer simulations and the acquired experimental results validate the proposed strategy in different conditions of operation.This work has been supported by FCT – Fundação para a Ciência e Tecnologia within the Project Scope: UID/CEC/00319/2019. This work has been supported by the FCT Project newERA4GRIDs PTDC/EEI-EEE/30283/2017, and by the FCT Project DAIPESEV PTDC/EEI-EEE/30382/2017. Tiago Sousa is supported by the doctoral scholarship SFRH/BD/134353/2017 granted by FCT

Improved vehicle-to-home (iV2H) operation mode: experimental analysis of the electric vehicle as off-line UPS

This paper presents experimental results of electric vehicle (EV) operation as an off-line uninterruptible power supply (UPS). Besides the traditional grid-to-vehicle and vehicle-to-grid modes, this paper presents an improved vehicle-to-home operation mode. This new operation mode consists of the detection of a power outage in the power grid and the change of the EV battery charger control to operate as an off-line UPS. When the power grid voltage is restored, the voltage produced by the on-board EV battery charger is slowly synchronized with the power grid voltage before a complete transition to the normal mode. This paper presents results of two algorithms to detect a power outage: the root mean square (rms) calculation method based on half-cycle of the power grid voltage, and the rms estimation based on a Kalman filter. The experimental results were obtained in steady and transient state considering two cases with the EV plugged in at home:when charging the batteries and without charging the batteries. This paper describes the EV battery charger, the power outage detection methods, and the voltage and current control strategies.- This work was supported by the Fundacao para a Ciencia e Tecnologia (FCT) in the scope of the projects under Grant PEst-UID/CEC/00319/2013. The work of V. Monteiro was supported by the Doctoral Scholarship through the Portuguese FCT Agency under Grant SFRH/BD/80155/2011. The work of B. Exposto was supported by the Doctoral Scholarship through the Portuguese FCT Agency under Grant SFRH/BD/87999/2012.info:eu-repo/semantics/publishedVersio

Improved voltage control of the electric vehicle operating as UPS in smart homes

As a contribution for sustainability, electric vehicles (EVs) are seen as one of the most effective influences in the transport sector. As complement to the challenges that entails the EVs integration into the grid considering the bidirectional operation (grid-to-vehicle and vehicle-to-grid), there are new concepts associated with the EV operation integrating various benefits for smart homes. In this sense, this paper proposes an improved voltage control of the EV operating as uninterruptible power supply (UPS) in smart homes. With the EV plugged-in into the smart home, it can act as an off-line UPS protecting the electrical appliances from power grid outages. Throughout the paper, the foremost advantages of the proposed voltage control strategy are comprehensively emphasized, establishing a comparison with the classical approach. Aiming to offer a sinusoidal voltage for linear and nonlinear electrical appliances, a pulse-width modulation with a multi-loop control scheme is used. A Kalman filter is used for decreasing significantly the time of detecting power outages and, consequently, the transition for the UPS mode. The experimental validation was executed with a bidirectional charger containing a double stage power conversion (an ac-dc interfacing the grid-side and a dc-dc interfacing the batteries- side) and a digital stage. The computer simulations and the acquired experimental results validate the proposed strategy in different conditions of operation.This work has been supported by COMPETE: POCI-01-0145-FEDER-007043 and FCT – Fundação para a Ciência e Tecnologia within the Project Scope: UID/CEC/00319/2013. This work is financed by the ERDF – European Regional Development Fund through the Operational Programme for Competitiveness and Internationalisation – COMPETE 2020 Programme, and by National Funds through the Portuguese funding agency, FCT – Fundação para a Ciência e a Tecnologia, within project SAICTPAC/0004/2015 – POCI – 01–0145–FEDER–016434. This work is part of the FCT project 0302836 NORTE-01-0145-FEDER-030283.info:eu-repo/semantics/publishedVersio

The role of off-board EV battery chargers in smart homes and smart grids: operation with renewables and energy storage systems

Concerns about climate changes and environmental air pollution are leading to the adoption of new technologies for transportation, mainly based on vehicle electrification and the interaction with smart grids, and also with the introduction of renewable energy sources (RES) accompanied by energy storage systems (ESS). For these three fundamental pillars, new power electronics technologies are emerging to transform the electrical power grid, targeting a flexible and collaborative operation. As a distinctive factor, the vehicle electrification has stimulated the presence of new technologies in terms of power management, both for smart homes and smart grids. As the title indicates, this book chapter focuses on the role of off-board EV battery chargers in terms of operation modes and contextualization for smart homes and smart grids in terms of opportunities. Based on a review of on-board and off-board EV battery charging systems (EV-BCS), this chapter focus on the off-board EV-BCS framed with RES and ESS as a dominant system in future smart homes. Contextualizing these aspects, three distinct cases are considered: (1) An ac smart home using separate power converters, according to the considered technologies; (2) A hybrid ac and dc smart home with an off-board EV-BCS interfacing RES and ESS, and with the electrical appliances plugged-in to the ac power grid; (3) A dc smart home using a unified 2 off-board EV-BCS with a single interface for the electrical power grid, and with multiple dc interfaces (RES, ESS, and electrical appliances). The results for each case are obtained in terms of efficiency and power quality, demonstrating that the off-board EV-BCS, as a unified structure for smart homes, presents better results. Besides, the off-board EV-BCS can also be used as an important asset for the smart grid, even when the EV is not plugged-in at the smart home.(undefined

Vehicle electrification: New challenges and opportunities for smart grids

Nowadays, concerns about climate change have contributed significantly to changing the paradigm in the urban transportation sector towards vehicle electrification, where purely electric or hybrid vehicles are increasingly a new reality, supported by all major automotive brands. Nevertheless, new challenges are imposed on the current electrical power grids in terms of a synergistic, progressive, dynamic and stable integration of electric mobility. Besides the traditional unidirectional charging, more and more, the adoption of a bidirectional interconnection is expected to be a reality. In addition, whenever the vehicle is plugged-in, the on-board power electronics can also be used for other purposes, such as in the event of a power failure, regardless if the vehicle is in charging mode or not. Other new opportunities, from the electrical grid point of view, are even more relevant in the context of off-board power electronics systems, which can be enhanced with new features as, for example, compensation of power quality problems or interface with renewable energy sources. In this sense, this paper aims to present, in a comprehensive way, the new challenges and opportunities that smart grids are facing, including the new technologies in the vehicle electrification, towards a sustainable future. A theoretical analysis is also presented and supported by experimental validation based on developed laboratory prototypes.This work was supported by COMPETE: POCI-01-0145-FEDER-007043 and FCT—Fundação para a Ciência e Tecnologia within the Project Scope: UID/CEC/00319/2013. This work was financed by the ERDF —European Regional Development Fund, through the Operational Programme for Competitiveness and Internationalisation—COMPETE2020 Programme, and by National Funds through the Portuguese funding agency, FCT—Fundação para a Ciência e a Tecnologia, within project SAICTPAC/0004/2015-POCI-01-0145-FEDER-016434. This work is part of the FCT project 0302836 NORTE-01-0145-FEDER-030283.info:eu-repo/semantics/publishedVersio

New opportunities and perspectives for the electric vehicle operation in smart grids and smart homes scenarios

New perspectives for the electric vehicle (EV) operation in smart grids and smart homes context are presented. Nowadays, plugged-in EVs are equipped with on-board battery chargers just to perform the charging process from the electrical power grid (G2V – grid-to-vehicle mode). Although this is the main goal of such battery chargers, maintaining the main hardware structure and changing the digital control algorithm, the on-board battery chargers can also be used to perform additional operation modes. Such operation modes are related with returning energy from the batteries to the power grid (V2G- vehicle-to-grid mode), constraints of the electrical installation where the EV is plugged-in (iG2V – improved grid-tovehicle mode), interface of renewables, and contributions to improve the power quality in the electrical installation. Besides the contributions of the EV to reduce oil consumption and greenhouse gas emissions associated to the transportation sector, through these additional operation modes, the EV also represents an important contribution for the smart grids and smart homes paradigms. Experimental results introducing the EV through the aforementioned interfaces and operation modes are presented. An on-board EV battery charger prototype was used connected to the power grid for a maximum power of 3.6 kW.This work has been supported by COMPETE: POCI-01-0145-FEDER-007043 and FCT – Fundação para a Ciência e Tecnologia within the Project Scope: UID/CEC/00319/2013. This work is financed by the ERDF – European Regional Development Fund through the Operational Programme for Competitiveness and Internationalisation Ǧ COMPETE 2020 Programme, and by National Funds through the Portuguese funding agency, FCT - Fundação para a Ciência e a Tecnologia, within project SAICTPAC/0004/2015- POCI- 01-0145-FEDER-016434.info:eu-repo/semantics/publishedVersio

Interfacing power electronics systems for smart grids: innovative perspectives of unified systems and operation modes

The power distribution grid is centrally managed concerning the requirements of the end-users, however, with the appearance of smart grids, new technologies arc arising. Therefore, distributed energy resources, mainly, renewables, energy storage systems, electric mobility, and power quality are viewed as encouraging contributions for improving power management. In these circumstances, this paper presents a power electronics perspective for the power distribution grid, considering innovative features, and including a power quality perception. Throughout the paper are presented relevant concepts for a concrete realization of a smart grid, supported by the integration of power electronics devices as the interface of the mentioned technologies. Aiming to support the innovative power electronics systems for interfacing the mentioned technologies in smart grids, a set of developed power electronics equipment was developed and, along with the paper, are shown and described, supporting the most important contributions of this paper.This work has been supported by FCT -Fundação para a Ciencia e Tecnologia within the R&D Units Project Scope: UIDB/00319/2020. This work has been supported by the FCT Project newERA4GRIDs PTDC/EEI-EEE/30283/2017

Plug-in electric vehicle deployment and integration with the electric grid

Key battery, semiconductor, and software technologies have sufficiently progressed over the past few decades to enable viable plug-in electric vehicle (PEV) alternatives to conventional vehicles. Alternatives to petroleum-based fuels for transportation are sought to address concerns over energy security, foreign oil derived U.S. trade deficits, oil related geopolitical entanglements, and emissions. The various types of PEVs have substantially different characteristics. The types and key attributes of PEVs, charging standards, and charging locations are described. The likely scenario for PEV-Grid interactions over the next decade is synthesized from the analysis of the technologies available to and circumstances of vehicle manufacturers, utilities, and supplier firms. PEV adoption considerations are evolving. Many lessons have been learned from the first generation of PEVs that were introduced starting in late 2010. Technology, market, and policy drivers of emerging trends in the diffusion of PEVs are explored more in-depth. PEVs as electric loads are unique in that they are large, flexible, and intelligent. These attributes can not only provide utilities a new source of revenue, but also improve grid stability and economics. Actions, technologies, and policies that utilities can deploy to increase adoption are discussed. Actions are explored to make the overall PEV ownership experience superior to a conventional vehicle. This dissertation also describes research of the capability for PEVs in Vehicle to Home (V2H) scenarios, where the vehicle acts as a residential battery storage system and/or a backup generator in a residential microgrid configuration during a grid outage. Residential energy data collected from a smart grid testbed is used with a custom PEV model to assess the performance (in terms of duration and power output) of a BEV or PHEV used for backup power. Our earlier results quantify the extent to which photovoltaic (PV) generation and the characteristics of a PEV (battery size, gasoline availability) affect the backup duration during an electric grid outage. Strategies to further increase backup duration and non-continuous self-sustaining off-grid alternatives were found in our early V2H research. Varied amounts of load curtailment and PHEV engine-generator control improvements are modeled in subsequent research.Electrical and Computer Engineerin