33,151 research outputs found
Integrated Circuitry to Detect Slippage Inspired by Human Skin and Artificial Retinas
This paper presents a bioinspired integrated tactile coprocessor that is able to generate a warning in the case of slippage via the data provided by a tactile sensor. Some implementations use different layers of piezoresistive and piezoelectric materials to build upon the raw sensor and obtain the static (pressure) as well as the dynamic (slippage) information. In this paper, a simple raw sensor is used, and a circuitry is implemented, which is able to extract the dynamic information from a single piezoresistive layer. The circuitry was inspired by structures found in human skin and retina, as they are biological systems made up of a dense network of receptors. It is largely based on an artificial retina , which is able to detect motion by using relatively simple spatial temporal dynamics. The circuitry was adapted to respond in the bandwidth of microvibrations produced by early slippage, resembling human skin. Experimental measurements from a chip implemented in a 0.35-mum four-metal two-poly standard CMOS process are presented to show both the performance of the building blocks included in each processing node and the operation of the whole system as a detector of early slippage.Ministerio de EconomĂa y Competitividad TEC2006-12376-C02-01Gobierno de España TEC2006- 1572
Dependable reconfigurable multi-sensor poles for security
Wireless sensor network poles for security monitoring under harsh environments require a very high dependability as they are safety-critical [1]. An example of a multi-sensor pole is shown. Crucial attribute in these systems for security, especially in harsh environment, is a high robustness and guaranteed availability during lifetime. This environment could include molest. In this paper, two approaches are used which are applied simultaneously but are developed in different projects. \u
Infrastructure for Detector Research and Development towards the International Linear Collider
The EUDET-project was launched to create an infrastructure for developing and
testing new and advanced detector technologies to be used at a future linear
collider. The aim was to make possible experimentation and analysis of data for
institutes, which otherwise could not be realized due to lack of resources. The
infrastructure comprised an analysis and software network, and instrumentation
infrastructures for tracking detectors as well as for calorimetry.Comment: 54 pages, 48 picture
Dynamic Power Management for Neuromorphic Many-Core Systems
This work presents a dynamic power management architecture for neuromorphic
many core systems such as SpiNNaker. A fast dynamic voltage and frequency
scaling (DVFS) technique is presented which allows the processing elements (PE)
to change their supply voltage and clock frequency individually and
autonomously within less than 100 ns. This is employed by the neuromorphic
simulation software flow, which defines the performance level (PL) of the PE
based on the actual workload within each simulation cycle. A test chip in 28 nm
SLP CMOS technology has been implemented. It includes 4 PEs which can be scaled
from 0.7 V to 1.0 V with frequencies from 125 MHz to 500 MHz at three distinct
PLs. By measurement of three neuromorphic benchmarks it is shown that the total
PE power consumption can be reduced by 75%, with 80% baseline power reduction
and a 50% reduction of energy per neuron and synapse computation, all while
maintaining temporary peak system performance to achieve biological real-time
operation of the system. A numerical model of this power management model is
derived which allows DVFS architecture exploration for neuromorphics. The
proposed technique is to be used for the second generation SpiNNaker
neuromorphic many core system
From FPGA to ASIC: A RISC-V processor experience
This work document a correct design flow using these tools in the Lagarto RISC- V Processor and the RTL design considerations that must be taken into account, to move from a design for FPGA to design for ASIC
The STAR MAPS-based PiXeL detector
The PiXeL detector (PXL) for the Heavy Flavor Tracker (HFT) of the STAR
experiment at RHIC is the first application of the state-of-the-art thin
Monolithic Active Pixel Sensors (MAPS) technology in a collider environment.
Custom built pixel sensors, their readout electronics and the detector
mechanical structure are described in detail. Selected detector design aspects
and production steps are presented. The detector operations during the three
years of data taking (2014-2016) and the overall performance exceeding the
design specifications are discussed in the conclusive sections of this paper
Phase Locked Loop Test Methodology
Phase locked loops are incorporated into almost every large-scale mixed signal and digital system on chip (SOC). Various types of PLL architectures exist including fully analogue, fully digital, semi-digital, and software based. Currently the most commonly used PLL architecture for SOC environments and chipset applications is the Charge-Pump (CP) semi-digital type. This architecture is commonly used for clock synthesis applications, such as the supply of a high frequency on-chip clock, which is derived from a low frequency board level clock. In addition, CP-PLL architectures are now frequently used for demanding RF (Radio Frequency) synthesis, and data synchronization applications. On chip system blocks that rely on correct PLL operation may include third party IP cores, ADCs, DACs and user defined logic (UDL). Basically, any on-chip function that requires a stable clock will be reliant on correct PLL operation. As a direct consequence it is essential that the PLL function is reliably verified during both the design and debug phase and through production testing. This chapter focuses on test approaches related to embedded CP-PLLs used for the purpose of clock generation for SOC. However, methods discussed will generally apply to CP-PLLs used for other applications
A scalable multi-core architecture with heterogeneous memory structures for Dynamic Neuromorphic Asynchronous Processors (DYNAPs)
Neuromorphic computing systems comprise networks of neurons that use
asynchronous events for both computation and communication. This type of
representation offers several advantages in terms of bandwidth and power
consumption in neuromorphic electronic systems. However, managing the traffic
of asynchronous events in large scale systems is a daunting task, both in terms
of circuit complexity and memory requirements. Here we present a novel routing
methodology that employs both hierarchical and mesh routing strategies and
combines heterogeneous memory structures for minimizing both memory
requirements and latency, while maximizing programming flexibility to support a
wide range of event-based neural network architectures, through parameter
configuration. We validated the proposed scheme in a prototype multi-core
neuromorphic processor chip that employs hybrid analog/digital circuits for
emulating synapse and neuron dynamics together with asynchronous digital
circuits for managing the address-event traffic. We present a theoretical
analysis of the proposed connectivity scheme, describe the methods and circuits
used to implement such scheme, and characterize the prototype chip. Finally, we
demonstrate the use of the neuromorphic processor with a convolutional neural
network for the real-time classification of visual symbols being flashed to a
dynamic vision sensor (DVS) at high speed.Comment: 17 pages, 14 figure
Two- and Three-dimensional High Performance, Patterned Overlay Multi-chip Module Technology
A two- and three-dimensional multi-chip module technology was developed in response to the continuum in demand for increased performance in electronic systems, as well as the desire to reduce the size, weight, and power of space systems. Though developed to satisfy the needs of military programs, such as the Strategic Defense Initiative Organization, the technology, referred to as High Density Interconnect, can also be advantageously exploited for a wide variety of commercial applications, ranging from computer workstations to instrumentation and microwave telecommunications. The robustness of the technology, as well as its high performance, make this generality in application possible. More encouraging is the possibility of this technology for achieving low cost through high volume usage
- âŠ