Within-Die Delay Variation Measurement And Analysis For Emerging Technologies Using An Embedded Test Structure

Both random and systematic within-die process variations (PV) are growing more severe with shrinking geometries and increasing die size. Escalation in the variations in delay and power with reductions in feature size places higher demands on the accuracy of variation models. Their availability can be used to improve yield, and the corresponding profitability and product quality of the fabricated integrated circuits (ICs). Sources of within-die variations include optical source limitations, and layout-based systematic effects (pitch, line-width variability, and microscopic etch loading). Unfortunately, accurate models of within-die PVs are becoming more difficult to derive because of their increasingly sensitivity to design-context. Embedded test structures (ETS) continue to play an important role in the development of models of PVs and as a mechanism to improve correlations between hardware and models. Variations in path delays are increasing with scaling, and are increasingly affected by neighborhood\u27 interactions. In order to fully characterize within-die variations, delays must be measured in the context of actual core-logic macros. Doing so requires the use of an embedded test structure, as opposed to traditional scribe line test structures such as ring oscillators (RO). Accurate measurements of within-die variations can be used, e.g., to better tune models to actual hardware (model-to-hardware correlations). In this research project, I propose an embedded test structure called REBEL (Regional dELay BEhavior) that is designed to measure path delays in a minimally invasive fashion; and its architecture measures the path delays more accurately. Design for manufacture-ability (DFM) analysis is done on the on 90 nm ASIC chips and 28nm Zynq 7000 series FPGA boards. I present ASIC results on within-die path delay variations in a floating-point unit (FPU) fabricated in IBM\u27s 90 nm technology, with 5 pipeline stages, used as a test vehicle in chip experiments carried out at nine different temperature/voltage (TV) corners. Also experimental data has been analyzed for path delay variations in short vs long paths. FPGA results on within-die variation and die-to-die variations on Advanced Encryption System (AES) using single pipelined stage are also presented. Other analysis that have been performed on the calibrated path delays are Flip Flop propagation delays for both rising and falling edge (tpHL and tpLH), uncertainty analysis, path distribution analysis, short versus long path variations and mid-length path within-die variation. I also analyze the impact on delay when the chips are subjected to industrial-level temperature and voltage variations. From the experimental results, it has been established that the proposed REBEL provides capabilities similar to an off-chip logic analyzer, i.e., it is able to capture the temporal behavior of the signal over time, including any static and dynamic hazards that may occur on the tested path. The ASIC results further show that path delays are correlated to the launch-capture (LC) interval used to time them. Therefore, calibration as proposed in this work must be carried out in order to obtain an accurate analysis of within-die variations. Results on ASIC chips show that short paths can vary up to 35% on average, while long paths vary up to 20% at nominal temperature and voltage. A similar trend occurs for within-die variations of mid-length paths where magnitudes reduced to 20% and 5%, respectively. The magnitude of delay variations in both these analyses increase as temperature and voltage are changed to increase performance. The high level of within-die delay variations are undesirable from a design perspective, but they represent a rich source of entropy for applications that make use of \u27secrets\u27 such as authentication, hardware metering and encryption. Physical unclonable functions (PUFs) are a class of primitives that leverage within-die-variations as a means of generating random bit strings for these types of applications, including hardware security and trust. Zynq FPGAs Die-to-Die and within-die variation study shows that on average there is 5% of within-Die variation and the range of die-to-Die variation can go upto 3ns. The die-to-Die variations can be explored in much further detail to study the variations spatial dependance. Additionally, I also carried out research in the area data mining to cater for big data by focusing the work on decision tree classification (DTC) to speed-up the classification step in hardware implementation. For this purpose, I devised a pipelined architecture for the implementation of axis parallel binary decision tree classification for meeting up with the requirements of execution time and minimal resource usage in terms of area. The motivation for this work is that analyzing larger data-sets have created abundant opportunities for algorithmic and architectural developments, and data-mining innovations, thus creating a great demand for faster execution of these algorithms, leading towards improving execution time and resource utilization. Decision trees (DT) have since been implemented in software programs. Though, the software implementation of DTC is highly accurate, the execution times and the resource utilization still require improvement to meet the computational demands in the ever growing industry. On the other hand, hardware implementation of DT has not been thoroughly investigated or reported in detail. Therefore, I propose a hardware acceleration of pipelined architecture that incorporates the parallel approach in acquiring the data by having parallel engines working on different partitions of data independently. Also, each engine is processing the data in a pipelined fashion to utilize the resources more efficiently and reduce the time for processing all the data records/tuples. Experimental results show that our proposed hardware acceleration of classification algorithms has increased throughput, by reducing the number of clock cycles required to process the data and generate the results, and it requires minimal resources hence it is area efficient. This architecture also enables algorithms to scale with increasingly large and complex data sets. We developed the DTC algorithm in detail and explored techniques for adapting it to a hardware implementation successfully. This system is 3.5 times faster than the existing hardware implementation of classification.\u2

Solid State Circuits Technologies

The evolution of solid-state circuit technology has a long history within a relatively short period of time. This technology has lead to the modern information society that connects us and tools, a large market, and many types of products and applications. The solid-state circuit technology continuously evolves via breakthroughs and improvements every year. This book is devoted to review and present novel approaches for some of the main issues involved in this exciting and vigorous technology. The book is composed of 22 chapters, written by authors coming from 30 different institutions located in 12 different countries throughout the Americas, Asia and Europe. Thus, reflecting the wide international contribution to the book. The broad range of subjects presented in the book offers a general overview of the main issues in modern solid-state circuit technology. Furthermore, the book offers an in depth analysis on specific subjects for specialists. We believe the book is of great scientific and educational value for many readers. I am profoundly indebted to the support provided by all of those involved in the work. First and foremost I would like to acknowledge and thank the authors who worked hard and generously agreed to share their results and knowledge. Second I would like to express my gratitude to the Intech team that invited me to edit the book and give me their full support and a fruitful experience while working together to combine this book

Cross-Layer Optimization for Power-Efficient and Robust Digital Circuits and Systems

With the increasing digital services demand, performance and power-efficiency become vital requirements for digital circuits and systems. However, the enabling CMOS technology scaling has been facing significant challenges of device uncertainties, such as process, voltage, and temperature variations. To ensure system reliability, worst-case corner assumptions are usually made in each design level. However, the over-pessimistic worst-case margin leads to unnecessary power waste and performance loss as high as 2.2x. Since optimizations are traditionally confined to each specific level, those safe margins can hardly be properly exploited. To tackle the challenge, it is therefore advised in this Ph.D. thesis to perform a cross-layer optimization for digital signal processing circuits and systems, to achieve a global balance of power consumption and output quality. To conclude, the traditional over-pessimistic worst-case approach leads to huge power waste. In contrast, the adaptive voltage scaling approach saves power (25% for the CORDIC application) by providing a just-needed supply voltage. The power saving is maximized (46% for CORDIC) when a more aggressive voltage over-scaling scheme is applied. These sparsely occurred circuit errors produced by aggressive voltage over-scaling are mitigated by higher level error resilient designs. For functions like FFT and CORDIC, smart error mitigation schemes were proposed to enhance reliability (soft-errors and timing-errors, respectively). Applications like Massive MIMO systems are robust against lower level errors, thanks to the intrinsically redundant antennas. This property makes it applicable to embrace digital hardware that trades quality for power savings.Comment: 190 page

Radiation Hardened by Design Methodologies for Soft-Error Mitigated Digital Architectures

abstract: Digital architectures for data encryption, processing, clock synthesis, data transfer, etc. are susceptible to radiation induced soft errors due to charge collection in complementary metal oxide semiconductor (CMOS) integrated circuits (ICs). Radiation hardening by design (RHBD) techniques such as double modular redundancy (DMR) and triple modular redundancy (TMR) are used for error detection and correction respectively in such architectures. Multiple node charge collection (MNCC) causes domain crossing errors (DCE) which can render the redundancy ineffectual. This dissertation describes techniques to ensure DCE mitigation with statistical confidence for various designs. Both sequential and combinatorial logic are separated using these custom and computer aided design (CAD) methodologies. Radiation vulnerability and design overhead are studied on VLSI sub-systems including an advanced encryption standard (AES) which is DCE mitigated using module level coarse separation on a 90-nm process with 99.999% DCE mitigation. A radiation hardened microprocessor (HERMES2) is implemented in both 90-nm and 55-nm technologies with an interleaved separation methodology with 99.99% DCE mitigation while achieving 4.9% increased cell density, 28.5 % reduced routing and 5.6% reduced power dissipation over the module fences implementation. A DMR register-file (RF) is implemented in 55 nm process and used in the HERMES2 microprocessor. The RF array custom design and the decoders APR designed are explored with a focus on design cycle time. Quality of results (QOR) is studied from power, performance, area and reliability (PPAR) perspective to ascertain the improvement over other design techniques. A radiation hardened all-digital multiplying pulsed digital delay line (DDL) is designed for double data rate (DDR2/3) applications for data eye centering during high speed off-chip data transfer. The effect of noise, radiation particle strikes and statistical variation on the designed DDL are studied in detail. The design achieves the best in class 22.4 ps peak-to-peak jitter, 100-850 MHz range at 14 pJ/cycle energy consumption. Vulnerability of the non-hardened design is characterized and portions of the redundant DDL are separated in custom and auto-place and route (APR). Thus, a range of designs for mission critical applications are implemented using methodologies proposed in this work and their potential PPAR benefits explored in detail.Dissertation/ThesisDoctoral Dissertation Electrical Engineering 201

inSense: A Variation and Fault Tolerant Architecture for Nanoscale Devices

Transistor technology scaling has been the driving force in improving the size, speed, and power consumption of digital systems. As devices approach atomic size, however, their reliability and performance are increasingly compromised due to reduced noise margins, difficulties in fabrication, and emergent nano-scale phenomena. Scaled CMOS devices, in particular, suffer from process variations such as random dopant fluctuation (RDF) and line edge roughness (LER), transistor degradation mechanisms such as negative-bias temperature instability (NBTI) and hot-carrier injection (HCI), and increased sensitivity to single event upsets (SEUs). Consequently, future devices may exhibit reduced performance, diminished lifetimes, and poor reliability. This research proposes a variation and fault tolerant architecture, the inSense architecture, as a circuit-level solution to the problems induced by the aforementioned phenomena. The inSense architecture entails augmenting circuits with introspective and sensory capabilities which are able to dynamically detect and compensate for process variations, transistor degradation, and soft errors. This approach creates ``smart\u27\u27 circuits able to function despite the use of unreliable devices and is applicable to current CMOS technology as well as next-generation devices using new materials and structures. Furthermore, this work presents an automated prototype implementation of the inSense architecture targeted to CMOS devices and is evaluated via implementation in ISCAS \u2785 benchmark circuits. The automated prototype implementation is functionally verified and characterized: it is found that error detection capability (with error windows from $\approx$30-400ps) can be added for less than 2\% area overhead for circuits of non-trivial complexity. Single event transient (SET) detection capability (configurable with target set-points) is found to be functional, although it generally tracks the standard DMR implementation with respect to overheads

Techniques for Aging, Soft Errors and Temperature to Increase the Reliability of Embedded On-Chip Systems

This thesis investigates the challenge of providing an abstracted, yet sufficiently accurate reliability estimation for embedded on-chip systems. In addition, it also proposes new techniques to increase the reliability of register files within processors against aging effects and soft errors. It also introduces a novel thermal measurement setup that perspicuously captures the infrared images of modern multi-core processors