Stent optical inspection system calibration and performance

Implantable medical devices, such as stents, have to be inspected 100% so no defective ones are implanted into a human body. In this paper, a novel optical stent inspection system is presented. By the combination of a high numerical aperture microscope, a triple illumination system, a rotational stage, and a CMOS camera, unrolled sections of the outer and inner surfaces of the stent are obtained with high resolution at high speed with a line-scan approach. In this paper, a comparison between the conventional microscope image formation and this new approach is shown. A calibration process and the investigation of the error sources that lead to inaccuracies of the critical dimension measurements are presented.Postprint (author's final draft

Flame front analysis of ethanol, butanol, iso-octane and gasoline in a spark-ignition engine using laser tomography and integral length scale measurements

Direct-injection spark-ignition engines have become popular due to their flexibility in injection strategies and higher efficiency; however, the high-pressure in-cylinder injection process can alter the airflow field by momentum exchange, with different effects for fuels of diverse properties. The current paper presents results from optical studies of stoichiometric combustion of ethanol, butanol, iso-octane and gasoline in a direct-injection spark-ignition engine run at 1500 RPM with 0.5 bar intake plenum pressure and early intake stroke fuel injection for homogeneous mixture preparation. The analysis initially involved particle image velocimetry measurements of the flow field at ignition timing with and without fuelling for comparison. Flame chemiluminescence imaging was used to characterise the global flame behaviour and double-pulsed Laser-sheet flame tomography by Mie scattering to quantify the local topology of the flame front. The flow measurements with fuel injection showed integral length scales of the same order to those of air only on the tumble plane, but larger regions with scales up to 9 mm on the horizontal plane. Averaged length scales over both measurement planes were between 4 and 6 mm, with ethanol exhibiting the largest and butanol the smallest. In non-dimensional form, the integral length scales were up to 20% of the clearance height and 5–12% of the cylinder bore. Flame tomography showed that at radii between 8 and 12 mm, ethanol was burning the fastest, followed by butanol, iso-octane and gasoline. The associated turbulent burning velocities were 4.6–6.5 times greater than the laminar burning velocities and about 13–20% lower than those obtained by flame chemiluminescence imaging. Flame roundness was 10–15% on the tomography plane, with largest values for ethanol, followed by butanol, gasoline and iso-octane; chemiluminescence imaging showed larger roundness (18–25%), albeit with the same order amongst fuels. The standard deviation of the displacement of the instantaneous flame contour from one filtered by its equivalent radius was obtained as a measure of flame brush thickness and correlated strongly with the equivalent flame radius; when normalised by the radius, it was 4–6% for all fuels. The number of crossing points between instantaneous and filtered flame contour showed a strong negative correlation with flame radius, independent of fuel type. The crossing point frequency was 0.5–1.6 mm−1. The flame brush thickness was about 1/10th of the integral length scale. A positive correlation was found between integral length scale and flame brush thickness and a negative correlation with crossing frequency

Temporal isolation of neural processes underlying face preference decisions

Decisions about whether we like someone are often made so rapidly from first impressions that it is difficult to examine the engagement of neural structures at specific points in time. Here, we used a temporally extended decision-making paradigm to examine brain activation with functional MRI (fMRI) at sequential stages of the decision-making process. Activity in reward-related brain structures—the nucleus accumbens (NAC) and orbitofrontal cortex (OFC)—was found to occur at temporally dissociable phases while subjects decided which of two unfamiliar faces they preferred. Increases in activation in the OFC occurred late in the trial, consistent with a role for this area in computing the decision of which face to choose. Signal increases in the NAC occurred early in the trial, consistent with a role for this area in initial preference formation. Moreover, early signal increases in the NAC also occurred while subjects performed a control task (judging face roundness) when these data were analyzed on the basis of which of those faces were subsequently chosen as preferred in a later task. The findings support a model in which rapid, automatic engagement of the NAC conveys a preference signal to the OFC, which in turn is used to guide choice

Superconducting gyroscope research

Four basic areas of research and development of superconducting gyroscopes are studied. Chapter 1 studies the analysis of a SQUID readout for a superconducting gyroscope. Chapter 2 studies the dependence of spin-up torque on channel and gas properties. Chapter 3 studies the theory of super fluid plug operation. And chapter 4 studies the gyro rotor and housing manufacture

Conductance fluctuations in quasi-two-dimensional systems: a practical view

The universal conductance fluctuations of quasi-two-dimensional systems are analyzed with experimental considerations in mind. The traditional statistical metrics of these fluctuations (such as variance) are shown to have large statistical errors in such systems. An alternative characteristic is identified, the inflection point of the correlation function in magnetic field, which is shown to be significantly more useful as an experimental metric and to give a more robust measure of phase coherence.Comment: 9 pages, 7 figure