Second Workshop on Practical Use of Coloured Petri Nets and Design/CPN.

This report contains the proceedings of the Second Workshop on Practical Use of Coloured Petri Nets and Design/CPN, October 13-15, 1999. The workshop was organised by the CPN group at the Department of Computer Science at the University of Aarhus, Denmark. The individual papers are available in electronic form via the web pages: http://www.daimi.au.dk/CPnets/workshop99

Energy Management

Forecasts point to a huge increase in energy demand over the next 25 years, with a direct and immediate impact on the exhaustion of fossil fuels, the increase in pollution levels and the global warming that will have significant consequences for all sectors of society. Irrespective of the likelihood of these predictions or what researchers in different scientific disciplines may believe or publicly say about how critical the energy situation may be on a world level, it is without doubt one of the great debates that has stirred up public interest in modern times. We should probably already be thinking about the design of a worldwide strategic plan for energy management across the planet. It would include measures to raise awareness, educate the different actors involved, develop policies, provide resources, prioritise actions and establish contingency plans. This process is complex and depends on political, social, economic and technological factors that are hard to take into account simultaneously. Then, before such a plan is formulated, studies such as those described in this book can serve to illustrate what Information and Communication Technologies have to offer in this sphere and, with luck, to create a reference to encourage investigators in the pursuit of new and better solutions

Soluciones TIC para envejecimiento activo y saludable en el hogar, en el puesto de trabajo y en la sociedad

[SPA] Esta tesis doctoral se presenta bajo la modalidad de compendio de publicaciones.La presente tesis doctoral compendia las publicaciones resultado de varios años de trabajo en el marco de tres líneas de investigación relacionadas con envejecimiento activo y soluciones e-health y Ambient Assisted Living para la población de edad más avanzada: Mobiliario inteligente y espacios inteligentes, envejecimiento activo y saludable, y soluciones de las Tecnologías de la Información y las Comunicaciones (TIC) enfocadas al cuidado de la salud en general y a las personas mayores en particular. Dichos trabajos muestran los resultados de un análisis del estado del arte, patentes y otros, para poder establecer una definición precisa del concepto de Mobiliario Inteligente con el objetivo de destacar sus propiedades en cuanto a funcionalidad y al elemento digital activo y conectado. Además, es necesario destacar que el mobiliario inteligente debe ser considerado como un ente integrado en el concepto de ciudades inteligentes o calidad de vida. Por ello la investigación del estado del arte se centra en envejecimiento de la población activa, tendencias recientes, direcciones futuras y envejecimiento en el trabajo. El objetivo es poder extraer conclusiones en cuanto a los principales problemas de motivación y proponer respuestas eficaces que apoyen el envejecimiento en el trabajo y soluciones e-health que permita a la población senior vivir de manera independiente durante más tiempo a través, tanto de una arquitectura IoT de bajo rango para ayudar a abordar los retos de despliegue de servicios e-health en áreas rurales, como de un sistema de teleasistencia basado en el cuidado proactivo, el envejecimiento activo, la prevención y las necesidades de los usuarios y sus entornos. [ENG] This doctoral dissertation has been presented in the form of thesis by publication. The present doctoral thesis summarises a set of publications resulting from several years of work within the framework of three research lines on active ageing and e-health solutions and Ambient Assisted Living for the ageing population: Smart furniture and Smart habitats, active and healthy ageing and Information and Communication Technology solutions focused on health care in general and on the adult population in particular. Such works show the results of an analysis of the state of the art, patents, and others, to establish a precise definition of the concept of Smart Furniture to highlight its properties in terms of functionality and the active and connected digital element, and to underline that smart furniture must be considered as an integrated entity in the concept of Smart Cities or Quality of Life. For this reason, the state-of-the- art research focuses on the aging workforce, recent trends, future directions, and aging at work. The aim is to draw conclusions on the main motivational issues and to propose effective responses that support the concept of aging at work, as well as e-health solutions for the senior population to live independently for longer through both, a low-range IoT architecture to help address the challenges of deploying a e-health system in rural areas, and a tele-assistance system based on proactivity, prevention, and users’ needs and their environments.Esta tesis doctoral se presenta bajo la modalidad de compendio de publicaciones. Está formada por un total de cuatro artículos. Artículo 1.-: Krejcar, O., Maresova, P., Selamat, A., Melero, F. J., Barakovic, S., Husic, J. B., Herrera-Viedma, E., Frischer, R., & Kuca, K., 2019. Smart furniture as a component of a smart city—definition based on key technologies specification. IEEE Access, volumen 7. https://doi.org/10.1109/ACCESS.2019.2927778. Artículo 2.-: Barakovic Husic, J., Melero, F. J., Barakovic, S., Lameski, P., Zdravevski, E., Maresova, P., Krejcar, O., Chorveb, I., Garcia, N.M, & Trajkovik, V., 2020. Aging at Work: A Review of Recent Trends and Future Directions. International journal of environmental research and public health, volumen 17 https://doi.org/10.3390/ijerph17207659. Artículo 3.-: Dimitrievski, A., Filiposka, S., Melero, F. J., Zdravevski, E., Lameski, P., Pires, I. M., Garcia N.M., Lousado, J.P. & Trajkovik, V., 2021. Rural Healthcare IoT Architecture Based on Low-Energy LoRa. International Journal of Environmental Research and Public health, volumen 18. https://doi.org/10.3390/ijerph18147660 Artículo 4.-: Melero, F. J., Bueno, M.V., Martínez, R., Maestre, R., Beteta, M.A., Puebla, T., Bleda, A.L., Sánchez, G., Pérez, R. & Álvarez, M., 2022. Design and Development of a Heterogeneous Active Assisted Living Solution for Monitoring and Following-up with Chronic Heart Failure Patients in Spain. Sensors, Volumen 22, https://doi.org/10.3390/s22228961Escuela Internacional de Doctorado de la Universidad Politécnica de CartagenaUniversidad Politécnica de CartagenaPrograma de Doctorado en Tecnologías de la Información y las Comunicacione

A transformation grammar-based methodology for housing rehabilitation: meeting contemporary functional and ICT requirements

This research starts from the premise that the future of the real estate market in Portugal will require the rehabilitation of existing residential areas in order to respond to new life-styles and dwelling requirements that have emerged in an era in which information plays a structuring role in society. The goal of this research is the definition of design guidelines and a rehabilitation methodology to support architects involved in the process of adapting existing dwellings, allowing them to balance sustainability requirements and economic feasibility with new dwelling trends such as the incorporation and updating of Information Communication and Automation Technologies and the need to solve emerging conflicts affecting the use of space prompted by the introduction of new functions associated with such technologies. In addition to defining a general methodology applicable to all the building types, the study focuses on a specific type, called “rabo-de-bacalhau” (“cod-tail”), built in Lisbon between 1945 and 1965 for which a specifc methodology has been generated. Both shape grammar and space syntax were used as part of the rehabilitation methodology as tools to identify and encode the principles and rules behind the adaptation of existing houses to new requirements.FCT PhD Gran

Transmission haut-débit sur les réseaux d'énergie: principes physiques et compatibilité électromagnétique

Power Line Communications consist of transmitting data by reusing the existing powerline as a propagation medium. Powerline networks represent a challenging environment for broadband communications, since they have not been designed for the transmission of high frequency signals. This Habilitation degree thesis presents our research on transmission physics and electromagnetic compatibility for in-home powerline networks. This research has been conducted since 2007 in the framework of a collaboration between Orange Labs and Telecom Bretagne, involving my supervision of three Ph.D. theses defended in 2012, 2013 and 2015, as the principal advisor.La technologie Courant Porteur en Ligne consiste à transmettre des données en réutilisant le réseau électrique classique en tant que support de propagation. Les réseaux d'énergie sont des environnements difficiles pour les communications à haut débit, car ils n'ont pas été conçus pour la transmission d'un signal à haute fréquence. Ce mémoire d'Habilitation à Diriger des Recherches présente mes travaux concernant la physique de la transmission et les aspects de Compatibilité Electro-Magnétique (CEM) pour le réseau électrique domestique. Ils ont été réalisés à partir de 2007 dans le cadre d'une collaboration entre Orange Labs et Telecom Bretagne, notamment à travers trois thèses soutenues en 2012, 2013 et 2015. Après une introduction générale à la technologie CPL, le manuscrit décrit l'environnement de propagation dans les réseaux d'énergie en termes de canal et de bruit électromagnétique. Les principes de la modélisation du canal CPL sont illustrés à partir de la problématique d'identification des trajets de propagation. L'une des principales évolutions du domaine concerne l'application de la technologie Multiple Input Multiple Output (MIMO) aux communications sur réseaux d'énergie. Nos études expérimentales ont démontré que l'adaptation de cette technique issue du domaine de la radio permet un doublement de la capacité de transmission. Nous présentons les campagnes de mesure réalisées au sein d'Orange Labs et du groupe Specialist Task Force 410 de l'ETSI. A partir de ces données, des modèles statistiques de canal de propagation MIMO et de bruit multi-capteurs ont été élaborés. En termes d'émission électromagnétique, la bande utilisée par les systèmes CPL est déjà occupée par d'autres services (radio amateur, radiodiffusion en ondes courtes). Nous décrivons les contraintes CEM des systèmes CPL et abordons les techniques de CEM cognitive, consistant à optimiser les ressources spectrales en tenant compte de la connaissance de l'environnement du système. En particulier, la technique de retournement temporel est étudiée pour la mitigation du rayonnement involontaire et sa performance est étudiée de manière expérimentale. Enfin, le manuscrit présente la problématique de l'efficacité énergétique des systèmes CPL. Nous présentons les mesures expérimentales réalisées afin de modéliser la consommation de modems classiques et MIMO. D'autre part, la configuration de communication en relais a été étudiée, afin d'évaluer le gain de ce mode de transmission en termes de consommation énergétique. A l'avenir, ces travaux pourront être étendus aux réseaux de distribution en basse et moyenne tension, pour le développement et l'optimisation des réseaux d'énergie intelligents, ou Smart Grids

Energy management engineering : a predictive energy management system incorporating an adaptive neural network for the direct heating of domestic and industrial fluid mediums.

The objective of this research project is to improve the control and provide a more cost-efficient operation in the direct heating of stored domestic or industrial fluid mediums; such to be achieved by means of an intelligent automated energy management system. For the residential customer this system concept applies to the hot water supply as stored in the familiar hot water cylinder; for the industrial or commercial customer the scope is considerably greater with larger quantities and varieties of fluid mediums. Both areas can obtain significant financial savings with improved energy management. Both consumers and power supply and distribution companies will benefit with increased utilisation of cheaper 'off-peak' electricity; reducing costs and spreading the system load demand. The project has focussed on domestic energy management with a definite view to the wider field of industrial applications. Domestic energy control methodology and equipment has not significantly altered for decades. However, computer hardware and software has since then flourished to an unprecedented proportion and has become relatively cheap and versatile; these factors pave the way for the application of computer technology in this area of great potential. The technology allows the implementation of a 'hot water energy management system', which makes a forecast of the hot water demand for the next 24 hours and proceeds to provide this demand in the most efficient manner possible. In the (near) future, the system, known as FEMS for Fluid Energy Management System, is able to take advantage and in fact will promote the use of a retail 'dynamic spot price tariff’. FEMS is a combination of hardware and software developed to replace the existing cylinder thermostat, take care of the necessary data-acquisition and control the cylinder's total energy instead of it's (single point) temperature. This provides, besides heating cost reduction, a greater accuracy, a degree of flexibility, improved feedback, legionella inhibition, and a diagnostic capability. To the domestic consumer the latter three items are of greatest relevance. The crux of the system lies in its predictive ability. Having explored the more conventional alternatives, a suitable solution was found in the utilisation of the Elman recurrent neural networks, which focus on the temporal characteristics of the hot water demand time series and are able to adapt to changing environments, coping with the presence of any non-linearity and noise in the data. Prior to developing FEMS a study was made of the basic fluid behaviour in medium and high pressure domestic hot water cylinders, an area not well-covered to date and of interest to engineers and manufacturers alike. For this step data acquisition equipment and software was purposely created. The control software plus equipment were combined into a fully automated test system with minimal operator input, allowing a large amount of data to be gathered over a period measured in months. A similar system was subsequently used to collect actual hot water demand data from a residential family, and in fact forms the basis for FEMS. Finally an enhanced version of FEMS is discussed and it is shown how the system is able to output multiple prediction and utilise varying tariff rates

Proceedings of the 7th International Conference EEDAL 2013 Energy Efficiency in Domestic Appliances and Lighting

This book contains the papers presented at the seventh international conference on Energy Efficiency in Domestic Appliances and Lighting. EEDAL'2013 was organised in Coimbra, Portugal in September 2013. This major international conference, which was previously been staged in Florence 1997, Naples 2000, Turin 2003, London 2006, B2e0r0l9in, Copenhagen 2011 has been very successful in attracting an international community of stakeholders dealing with residential appliances, equipment, metering liagnhdti ng (including manufacturers, retailers, consumers, governments, international organisations aangde ncies, academia and experts) to discuss the progress achieved in technologies, behavioural aspects and poliacineds , the strategies that need to be implemented to further progress this important work. Potential readers who may benefit from this book include researchers, engineers, policymakers, and all those who can influence the design, selection, application, and operation of electrical appliances and lighting.JRC.F.7-Renewables and Energy Efficienc

NET ZERO ENERGY BUILDINGS: AN ITALIAN CASE STUDY. ANALYSIS OF THE ENERGY BALANCE AND RETROFIT HYPOTHESIS IN ORDER TO REACH THE NET ZERO ENERGY TARGET.

In the last years the concept of Net Zero Energy Building (NZEB) has been developing and spreading in the scientific community. The work presented in this thesis has been largely developed in the context of the International Energy Agency (IEA) joint Programme Solar Heating and Cooling (SHC) Task40 and Energy Conservation in Buildings and Community Systems (ECBCS) Annex52: Towards Net Zero Energy Solar Buildings. It is known that the energy consumption in Europe for residential and commercial buildings is around 40 % of the total production. It is then extremely important to optimize both the implementation of energy efficiency measures and the usage of renewable resources that can be harvested on site. When energy efficiency measures are successfully combined with on-site renewable energy sources, and the energy consumption is equal (or nearly) to the energy production, then the output achieved can be referred to as ―near net zero energy ―or ―net zero-energy building‖. In Chapter 2 a description of the main typologies of NZEB is carried out, revealing that the most important ones are the following: site-ZEB and source-ZEB depending on where the energy balance is calculated. After a brief description of the NZEB most common definitions and classifications many examples have been examined, analyzing their features in relation to the climate in which they are, in order to show different solutions and approaches to the problem of reaching net zero energy balances (Chapter 3). In this thesis an Italian case-study has been examined: the Leaf House (LH) located in Ancona, Italy. The Leaf House is one of the best case studies of the IEA/SHC/ECBS/Task 40 Programme, in terms of thermo-physical characteristics of the building envelope, thermal plant, building automation system and energy monitoring. In Chapter 5 the Leaf House case-study is described in detail as well as the model implemented into the TRNSYS software (Chapter 6), reproducing the energy production system, the thermal features of the building and comparing simulated with monitored data. Particular attention has to be paid to the Leaf House monitoring system, which allows the assessment of the building energy balance.A careful analysis of monitored data brings to search some improving strategies to reach the zero energy target. After the simulation of the real building systems (through the software TRNSYS-Chapter 6), several scenarios have been investigated to improve energy performances of the building. Moreover the implemented model has been properly calibrated. The study proposes a detailed analysis of the case-study in order to show the possible energy savings that an NZEB can achieve in comparison with a non-net zero energy building. The re-design options are then proposed and the results evaluated by TRNSYS are described in detail. The monitored situation shows an energy consumption of 37 MWh for the year 2009; although around 6 MWh are wasted in the monitoring equipment the energy production is lower than this value. A simple solution, to reach the NZEB status is moving towards a higher production: e.g. the substitution of the PV panels with higher efficient others. In this way the energy balance reaches ―zero‖ during the year. Nevertheless the problem can be solved otherwise, reducing the energy needs. In this direction, the Geothermal Heat Pump and its energy needs have been analyzed in detail. It has been verified that the COP of the machine is way lower than the declared 4.6 and that an effective 4.6 COP could lead to significant energy savings. The idea of reaching higher efficiencies led to the proposal of a different plant scheme with the exclusion of a heat exchanger to reduce as much as possible energy losses. While it is possible to obtain the NZEB status simply making a substitution of the PV panels, the investigation on further energy savings has been continued. Finally the Italian case study allow to identify the strategies to improve the energy performances of the a Near Net Zero Energy building to reach the NZEB target. It represents also an Italian reference for others who wish to build NZEBs in the Italian context. At last two annexes to this work are shown, the first shows objectives and activities of the Task 40 ECBS Programme while the second shows the Building description file created into TRNBUILD environment, in order to describe the Leaf House building envelope features