6,890 research outputs found

    UMSL Bulletin 2023-2024

    Get PDF
    The 2023-2024 Bulletin and Course Catalog for the University of Missouri St. Louis.https://irl.umsl.edu/bulletin/1088/thumbnail.jp

    Technology for Low Resolution Space Based RSO Detection and Characterisation

    Get PDF
    Space Situational Awareness (SSA) refers to all activities to detect, identify and track objects in Earth orbit. SSA is critical to all current and future space activities and protect space assets by providing access control, conjunction warnings, and monitoring status of active satellites. Currently SSA methods and infrastructure are not sufficient to account for the proliferations of space debris. In response to the need for better SSA there has been many different areas of research looking to improve SSA most of the requiring dedicated ground or space-based infrastructure. In this thesis, a novel approach for the characterisation of RSO’s (Resident Space Objects) from passive low-resolution space-based sensors is presented with all the background work performed to enable this novel method. Low resolution space-based sensors are common on current satellites, with many of these sensors being in space using them passively to detect RSO’s can greatly augment SSA with out expensive infrastructure or long lead times. One of the largest hurtles to overcome with research in the area has to do with the lack of publicly available labelled data to test and confirm results with. To overcome this hurtle a simulation software, ORBITALS, was created. To verify and validate the ORBITALS simulator it was compared with the Fast Auroral Imager images, which is one of the only publicly available low-resolution space-based images found with auxiliary data. During the development of the ORBITALS simulator it was found that the generation of these simulated images are computationally intensive when propagating the entire space catalog. To overcome this an upgrade of the currently used propagation method, Specialised General Perturbation Method 4th order (SGP4), was performed to allow the algorithm to run in parallel reducing the computational time required to propagate entire catalogs of RSO’s. From the results it was found that the standard facet model with a particle swarm optimisation performed the best estimating an RSO’s attitude with a 0.66 degree RMSE accuracy across a sequence, and ~1% MAPE accuracy for the optical properties. This accomplished this thesis goal of demonstrating the feasibility of low-resolution passive RSO characterisation from space-based platforms in a simulated environment

    Beam scanning by liquid-crystal biasing in a modified SIW structure

    Get PDF
    A fixed-frequency beam-scanning 1D antenna based on Liquid Crystals (LCs) is designed for application in 2D scanning with lateral alignment. The 2D array environment imposes full decoupling of adjacent 1D antennas, which often conflicts with the LC requirement of DC biasing: the proposed design accommodates both. The LC medium is placed inside a Substrate Integrated Waveguide (SIW) modified to work as a Groove Gap Waveguide, with radiating slots etched on the upper broad wall, that radiates as a Leaky-Wave Antenna (LWA). This allows effective application of the DC bias voltage needed for tuning the LCs. At the same time, the RF field remains laterally confined, enabling the possibility to lay several antennas in parallel and achieve 2D beam scanning. The design is validated by simulation employing the actual properties of a commercial LC medium

    Pipeline quantum processor architecture for silicon spin qubits

    Full text link
    Noisy intermediate-scale quantum (NISQ) devices seek to achieve quantum advantage over classical systems without the use of full quantum error correction. We propose a NISQ processor architecture using a qubit `pipeline' in which all run-time control is applied globally, reducing the required number and complexity of control and interconnect resources. This is achieved by progressing qubit states through a layered physical array of structures which realise single and two-qubit gates. Such an approach lends itself to NISQ applications such as variational quantum eigensolvers which require numerous repetitions of the same calculation, or small variations thereof. In exchange for simplifying run-time control, a larger number of physical structures is required for shuttling the qubits as the circuit depth now corresponds to an array of physical structures. However, qubit states can be `pipelined' densely through the arrays for repeated runs to make more efficient use of physical resources. We describe how the qubit pipeline can be implemented in a silicon spin-qubit platform, to which it is well suited to due to the high qubit density and scalability. In this implementation, we describe the physical realisation of single and two qubit gates which represent a universal gate set that can achieve fidelities of F≥0.9999\mathcal{F} \geq 0.9999, even under typical qubit frequency variations.Comment: 21 pages (13 for main + 8 for supplement), 9 figures (4 for main + 5 for supplement

    Advances in Binders for Construction Materials

    Get PDF
    The global binder production for construction materials is approximately 7.5 billion tons per year, contributing ~6% to the global anthropogenic atmospheric CO2 emissions. Reducing this carbon footprint is a key aim of the construction industry, and current research focuses on developing new innovative ways to attain more sustainable binders and concrete/mortars as a real alternative to the current global demand for Portland cement.With this aim, several potential alternative binders are currently being investigated by scientists worldwide, based on calcium aluminate cement, calcium sulfoaluminate cement, alkali-activated binders, calcined clay limestone cements, nanomaterials, or supersulfated cements. This Special Issue presents contributions that address research and practical advances in i) alternative binder manufacturing processes; ii) chemical, microstructural, and structural characterization of unhydrated binders and of hydrated systems; iii) the properties and modelling of concrete and mortars; iv) applications and durability of concrete and mortars; and v) the conservation and repair of historic concrete/mortar structures using alternative binders.We believe this Special Issue will be of high interest in the binder industry and construction community, based upon the novelty and quality of the results and the real potential application of the findings to the practice and industry

    Towards High-Accuracy Simulations of Strongly Correlated Materials Using Tensor Networks

    Get PDF
    Accurate and verifiable computation of the properties of real materials with strong electron correlation has been a long-standing challenge in the fields of chemistry, physics, and material science. Most existing algorithms suffer from either approximations that are too inaccurate, or fundamental computational complexity that is too high. In studies of simplified models of strongly-correlated materials, tensor network algorithms have demonstrated the potential to overcome these limitations. This thesis describes our research efforts to develop new algorithms for two-dimensional (2D) tensor networks that extend their range of applicability beyond simple models and toward simulations of realistic materials. We begin by describing three algorithms for projected entangled-pair states (PEPS, a type of 2D tensor network) that address three of their major limitations: numerical stability, long-range interactions, and computational efficiency of operators. We first describe (Ch. 2) a technique for converting a PEPS into a canonical form. By generalizing the QR matrix factorization to entire columns of a PEPS, we approximately generate a PEPS with analogous properties to the well-studied canonical 1D tensor network. This connection enables enhanced numerical stability and ground state optimization protocols. Next, we describe (Ch. 3) a technique to efficiently represent physically realistic long-range interactions between particles in a 2D tensor network operator, a projected entangled-pair operator (PEPO). We express the long-range interaction as a linear combination of correlation functions of an auxiliary system with only nearest-neighbor interactions. This allows us to represent long-range pairwise interactions with linear scaling in the system size. The third algorithm we present (Ch. 4) is a method to rewrite the 2D PEPO in terms of a set of quasi-1D tensor network operators, by exploiting intrinsic redundancies in the PEPO representation. We also report an on-the-fly contraction algorithm using these operators that allows for a significant reduction in computational complexity, enabling larger scale simulations of more complex problems. We then move on to describe (Ch. 5) an extensive study of a "synthetic 2D material"---a two-dimensional square array of ultracold Rydberg atoms---enabled by some of the new algorithms. We investigate the ground state quantum phases of this system in the bulk and on large finite arrays directly comparable to recent quantum simulation experiments. We find a greatly altered phase diagram compared to earlier numerical and experimental studies, and in particular, we uncover an unexpected entangled nematic phase that appears in the absence of geometric frustration. Finally, we finish by describing (Ch. 6) a somewhat unrelated, but topically similar project in which we investigate the feasibility of laser cooling small molecules with two metal atoms to ultracold temperatures. We study in detail the properties of the molecules YbCCCa and YbCCAl for application in precision measurement experiments.</p

    KYT2022 Finnish Research Programme on Nuclear Waste Management 2019–2022 : Final Report

    Get PDF
    KYT2022 (Finnish Research Programme on Nuclear Waste Management 2019–2022), organised by the Ministry of Economic Affairs and Employment, was a national research programme with the objective to ensure that the authorities have sufficient levels of nuclear expertise and preparedness that are needed for safety of nuclear waste management. The starting point for public research programs on nuclear safety is that they create the conditions for maintaining the knowledge required for the continued safe and economic use of nuclear energy, developing new know-how and participating in international collaboration. The content of the KYT2022 research programme was composed of nationally important research topics, which are the safety, feasibility and acceptability of nuclear waste management. KYT2022 research programme also functioned as a discussion and information-sharing forum for the authorities, those responsible for nuclear waste management and the research organizations, which helped to make use of the limited research resources. The programme aimed to develop national research infrastructure, ensure the continuing availability of expertise, produce high-level scientific research and increase general knowledge of nuclear waste management

    Roadmap for a sustainable circular economy in lithium-ion and future battery technologies

    Get PDF
    The market dynamics, and their impact on a future circular economy for lithium-ion batteries (LIB), are presented in this roadmap, with safety as an integral consideration throughout the life cycle. At the point of end-of-life (EOL), there is a range of potential options—remanufacturing, reuse and recycling. Diagnostics play a significant role in evaluating the state-of-health and condition of batteries, and improvements to diagnostic techniques are evaluated. At present, manual disassembly dominates EOL disposal, however, given the volumes of future batteries that are to be anticipated, automated approaches to the dismantling of EOL battery packs will be key. The first stage in recycling after the removal of the cells is the initial cell-breaking or opening step. Approaches to this are reviewed, contrasting shredding and cell disassembly as two alternative approaches. Design for recycling is one approach that could assist in easier disassembly of cells, and new approaches to cell design that could enable the circular economy of LIBs are reviewed. After disassembly, subsequent separation of the black mass is performed before further concentration of components. There are a plethora of alternative approaches for recovering materials; this roadmap sets out the future directions for a range of approaches including pyrometallurgy, hydrometallurgy, short-loop, direct, and the biological recovery of LIB materials. Furthermore, anode, lithium, electrolyte, binder and plastics recovery are considered in order to maximise the proportion of materials recovered, minimise waste and point the way towards zero-waste recycling. The life-cycle implications of a circular economy are discussed considering the overall system of LIB recycling, and also directly investigating the different recycling methods. The legal and regulatory perspectives are also considered. Finally, with a view to the future, approaches for next-generation battery chemistries and recycling are evaluated, identifying gaps for research. This review takes the form of a series of short reviews, with each section written independently by a diverse international authorship of experts on the topic. Collectively, these reviews form a comprehensive picture of the current state of the art in LIB recycling, and how these technologies are expected to develop in the future

    Feature Papers in Compounds

    Get PDF
    This book represents a collection of contributions in the field of the synthesis and characterization of chemical compounds, natural products, chemical reactivity, and computational chemistry. Among its contents, the reader will find high-quality, peer-reviewed research and review articles that were published in the open access journal Compounds by members of the Editorial Board and the authors invited by the Editorial Office and Editor-in-Chief

    Numerical Simulations of Dusty Colliding Wind Binaries

    Get PDF
    Colliding Wind Binary (CWB) systems are relatively rare phenomena, but have a significant influence on galactic evolution in terms of dust production -- especially in the early universe. The mechanisms behind this dust production, however, are poorly understood. The strong winds from both partners in the binary system drive shocks that heat the dust forming region to temperatures in excess of 100 million Kelvin; whilst this region does rapidly cool, the initial shock temperatures would destroy any dust grains that formed outside the collision region. Furthermore, this collision region is difficult to observe and simulate, limiting our understanding of how grains form and evolve in this region. This thesis attempts to improve our understanding of the evolution of dust grains within these systems, particularly growth of these grains from small dust grain cores to micron-scale grains. A co-moving dust grain model was implemented that simulates growth through accretion of gas onto the dust grains, as well as destruction through gas-grain sputtering. The model also simulates cooling through collisional excitation and subsequent emission for both dust grains and gas. Overall, the goal of this model was to determine how dust growth was influenced by the wind and orbital characteristics of the system, and which of these characteristics were most important for dust growth. First, a parameter space exploration of dust producing CWB systems (WCd systems) was conducted, varying the orbital separation, the wind terminal velocity and the mass loss rate of each star. It was found that dust production is strongly influenced by the ratio of wind terminal velocities between each star, as well as the orbital separation. Following up on this, a limited simulation of the episodic dust forming system WR140 was conducted, in order to understand how variance in orbital separation through eccentricity changed dust production rates over the course of a periastron passage. Furthermore, it was determined that dust production occurs over a very short period immediately prior to periastron passage and a small period after, with an ``active'' phase of approximately 1 year, or an eighth of the systems orbital period Whilst there is much to be done in the future, and many more systems to be simulated (in particular the recently discovered WR+WR CWB systems WR48a and WR70-16) this model is a good first step towards shedding light on these elusive and dust-shrouded systems
    • …
    corecore