189 research outputs found
Scalability of parallel video decoding on heterogeneous manycore architectures
This paper presents an analysis of the scalability of the parallel video decoding on heterogeneous many core architectures. As benchmark, we use a highly parallel H.264/AVC video decoder that generates a large number of independent tasks. In order to translate task-level parallelism into performance gains both the video decoder and the architecture have been optimized. The video decoder was modified for exploiting coarse-grain frame-level parallelism in the entropy decoding kernel which has been considered the main bottleneck. Second, a heterogeneous combination of cores is evaluated for executing different type of tasks. Finally, an evaluation of the memory requirements of the whole system has been carried out. Experiments conducted using a trace-driven simulation methodology shows that the evaluated system exhibits a good parallel scalability up to 68 cores. At this point the parallel video decoder is able to decode more than 200 HD frames per second using simple low power processors.Postprint (published version
A highly scalable parallel implementation of H.264
Developing parallel applications that can harness and efficiently use future many-core architectures is the key challenge for scalable computing systems. We contribute to this challenge by presenting a parallel implementation of H.264 that scales to a large number of cores. The algorithm exploits the fact that independent macroblocks (MBs) can be processed in parallel, but whereas a previous approach exploits only intra-frame MB-level parallelism, our algorithm exploits intra-frame as well as inter-frame MB-level parallelism. It is based on the observation that inter-frame dependencies have a limited spatial range. The algorithm has been implemented on a many-core architecture consisting of NXP TriMedia TM3270 embedded processors. This required to develop a subscription mechanism, where MBs are subscribed to the kick-off lists associated with the reference MBs. Extensive simulation results show that the implementation scales very well, achieving a speedup of more than 54 on a 64-core processor, in which case the previous approach achieves a speedup of only 23. Potential drawbacks of the 3D-Wave strategy are that the memory requirements increase since there can be many frames in flight, and that the frame latency might increase. Scheduling policies to address these drawbacks are also presented. The results show that these policies combat memory and latency issues with a negligible effect on the performance scalability. Results analyzing the impact of the memory latency, L1 cache size, and the synchronization and thread management overhead are also presented. Finally, we present performance requirements for entropy (CABAC) decoding.
This work was performed while the fourth author was with NXP Semiconductors.Peer ReviewedPostprint (author's final draft
Multicore architecture optimizations for HPC applications
From single-core CPUs to detachable compute accelerators, supercomputers made a tremendous progress by using available transistors on chip and specializing hardware for a given type of computation. Today, compute nodes used in HPC employ multi-core CPUs tailored for serial execution and multiple accelerators (many-core devices or GPUs) for throughput computing. However, designing next-generation HPC system requires not only the performance improvement but also better energy efficiency. Current trend of reaching exascale level of computation asks for at least an order of magnitude increase in both of these metrics.
This thesis explores HPC-specific optimizations in order to make better utilization of the available transistors and to improve performance by transparently executing parallel code across multiple GPU accelerators. First, we analyze several HPC benchmark suites, compare them against typical desktop applications, and identify the differences which advocate for proper core tailoring. Moreover, within the HPC applications, we evaluate serial and parallel code sections separately, resulting in an Asymmetric Chip Multiprocessor (ACMP) design with one core optimized for single-thread performance and many lean cores for parallel execution. Our results presented here suggests downsizing of core front-end structures providing an HPC-tailored lean core which saves 16% of the core area and 7% of power, without performance loss.
Further improving an ACMP design, we identify that multiple lean cores run the same code during parallel regions. This motivated us to evaluate the idea where lean cores share the I-cache with the intent of benefiting from mutual prefetching, without increasing the average access latency. Our exploration of the multiple parameters finds the sweet spot on a wide interconnect to access the shared I-cache and the inclusion of a few line buffers to provide the required bandwidth and latency to sustain performance. The projections presented in this thesis show additional 11% area savings with a 5% energy reduction at no performance cost. These area and power savings might be attractive for many-core accelerators either for increasing the performance per area and power unit, or adding additional cores and thus improving the performance for the same hardware budget.
Finally, in this thesis we study the effects of future NUMA accelerators comprised of multiple GPU devices. Reaching the limits of a single-GPU die size, next-generation GPU compute accelerators will likely embrace multi-socket designs increasing the core count and memory bandwidth. However, maintaining the UMA behavior of a single-GPU in multi-GPU systems without code rewriting stands as a challenge. We investigate multi-socket NUMA GPU designs and show that significant changes are needed to both the GPU interconnect and cache architectures to achieve performance scalability. We show that application phase effects can be exploited allowing GPU sockets to dynamically optimize their individual interconnect and cache policies, minimizing the impact of NUMA effects. Our NUMA-aware GPU outperforms a single GPU by 1.5×, 2.3×, and 3.2× while achieving 89%, 84%, and 76% of theoretical application scalability in 2, 4, and 8 sockets designs respectively. Implementable today, NUMA-aware multi-socket GPUs may be a promising candidate for performance scaling of future compute nodes used in HPC.Empezando por CPUs de un solo procesador, y pasando por aceleradores discretos, los supercomputadores han avanzado enormemente utilizando todos los transistores disponibles en el chip, y especializando los diseños para cada tipo de cálculo. Actualmente, los nodos de cálculo de un sistema de Computación de Altas Prestaciones (CAP) utilizan CPUs de múltiples procesadores, optimizados para el cálculo serial de instrucciones, y múltiples aceleradores (aceleradores gráficos, o many-core), optimizados para el cálculo paralelo. El diseño de un sistema CAP de nueva generación requiere no solo mejorar el rendimiento de cálculo, sino también mejorar la eficiencia energética. La siguiente generación de sistemas requiere mejorar un orden de magnitud en ambas métricas simultáneamente. Esta tesis doctoral explora optimizaciones específicas para sistemas CAP para hacer un mejor uso de los transistores, y para mejorar las prestaciones de forma transparente ejecutando las aplicaciones en múltiples aceleradores en paralelo. Primero, analizamos varios conjuntos de aplicaciones CAP, y las comparamos con aplicaciones para servidores y escritorio, identificando las principales diferencias que nos indican cómo ajustar la arquitectura para CAP. En las aplicaciones CAP, también analizamos la parte secuencial del código y la parte paralela de forma separada, . El resultado de este análisis nos lleva a proponer una arquitectura multiprocesador asimétrica (ACMP) , con un procesador optimizado para el código secuencial, y múltiples procesadores, más pequeños, optimizados para el procesamiento paralelo. Nuestros resultados muestran que reducir el tamaño de las estructuras del front-end (fetch, y predicción de saltos) en los procesadores paralelos nos proporciona un 16% extra de área en el chip, y una reducción de consumo del 7%. Como mejora a nuestra arquitectura ACMP, proponemos explotar el hecho de que todos los procesadores paralelos ejecutan el mismo código al mismo tiempo. Evaluamos una propuesta en que los procesadores paralelos comparten la caché de instrucciones, con la intención de que uno de ellos precargue las instrucciones para los demás procesadores (prefetching), sin aumentar la latencia media de acceso. Nuestra exploración de los distintos parámetros determina que el punto óptimo requiere una interconexión de alto ancho de banda para acceder a la caché compartida, y el uso de unos pocos line buffers para mantener el ancho de banda y la latencia necesarios. Nuestras proyecciones muestran un ahorro adicional del 11% en área y el 5% en energía, sin impacto en el rendimiento. Estos ahorros de área y energía permiten a un multiprocesador incrementar la eficiencia energética, o aumentar el rendimiento añadiendo procesador adicionales. Por último, estudiamos el efecto de usar múltiples aceleradores (GPU) en una arquitectura con tiempo de acceso a memoria no uniforme (NUMA). Una vez alcanzado el límite de número de transistores y tamaño máximo por chip, la siguiente generación de aceleradores deberá utilizar múltiples chips para aumentar el número de procesadores y el ancho de banda de acceso a memoria. Sin embargo, es muy difícil mantener la ilusión de un tiempo de acceso a memoria uniforme en un sistema multi-GPU sin reescribir el código de la aplicación. Nuestra investigación sobre sistemas multi-GPU muestra retos significativos en el diseño de la interconexión entre las GPU y la jerarquía de memorias cache. Nuestros resultados muestran que se puede explotar el comportamiento en fases de las aplicaciones para optimizar la configuración de la interconexión y las cachés de forma dinámica, minimizando el impacto de la arquitectura NUMA. Nuestro diseño mejora el rendimiento de un sistema con una única GPU en 1.5x, 2.3x y 3.2x (el 89%, 84%, y 76% del máximo teórico) usando 2, 4, y 8 GPUs en paralelo. Siendo su implementación posible hoy en dia, los nodos de cálculo con múltiples aceleradores son una alternativa atractiva para futuros sistemas CAP
Multicore architecture optimizations for HPC applications
From single-core CPUs to detachable compute accelerators, supercomputers made a tremendous progress by using available transistors on chip and specializing hardware for a given type of computation. Today, compute nodes used in HPC employ multi-core CPUs tailored for serial execution and multiple accelerators (many-core devices or GPUs) for throughput computing. However, designing next-generation HPC system requires not only the performance improvement but also better energy efficiency. Current trend of reaching exascale level of computation asks for at least an order of magnitude increase in both of these metrics.
This thesis explores HPC-specific optimizations in order to make better utilization of the available transistors and to improve performance by transparently executing parallel code across multiple GPU accelerators. First, we analyze several HPC benchmark suites, compare them against typical desktop applications, and identify the differences which advocate for proper core tailoring. Moreover, within the HPC applications, we evaluate serial and parallel code sections separately, resulting in an Asymmetric Chip Multiprocessor (ACMP) design with one core optimized for single-thread performance and many lean cores for parallel execution. Our results presented here suggests downsizing of core front-end structures providing an HPC-tailored lean core which saves 16% of the core area and 7% of power, without performance loss.
Further improving an ACMP design, we identify that multiple lean cores run the same code during parallel regions. This motivated us to evaluate the idea where lean cores share the I-cache with the intent of benefiting from mutual prefetching, without increasing the average access latency. Our exploration of the multiple parameters finds the sweet spot on a wide interconnect to access the shared I-cache and the inclusion of a few line buffers to provide the required bandwidth and latency to sustain performance. The projections presented in this thesis show additional 11% area savings with a 5% energy reduction at no performance cost. These area and power savings might be attractive for many-core accelerators either for increasing the performance per area and power unit, or adding additional cores and thus improving the performance for the same hardware budget.
Finally, in this thesis we study the effects of future NUMA accelerators comprised of multiple GPU devices. Reaching the limits of a single-GPU die size, next-generation GPU compute accelerators will likely embrace multi-socket designs increasing the core count and memory bandwidth. However, maintaining the UMA behavior of a single-GPU in multi-GPU systems without code rewriting stands as a challenge. We investigate multi-socket NUMA GPU designs and show that significant changes are needed to both the GPU interconnect and cache architectures to achieve performance scalability. We show that application phase effects can be exploited allowing GPU sockets to dynamically optimize their individual interconnect and cache policies, minimizing the impact of NUMA effects. Our NUMA-aware GPU outperforms a single GPU by 1.5×, 2.3×, and 3.2× while achieving 89%, 84%, and 76% of theoretical application scalability in 2, 4, and 8 sockets designs respectively. Implementable today, NUMA-aware multi-socket GPUs may be a promising candidate for performance scaling of future compute nodes used in HPC.Empezando por CPUs de un solo procesador, y pasando por aceleradores discretos, los supercomputadores han avanzado enormemente utilizando todos los transistores disponibles en el chip, y especializando los diseños para cada tipo de cálculo. Actualmente, los nodos de cálculo de un sistema de Computación de Altas Prestaciones (CAP) utilizan CPUs de múltiples procesadores, optimizados para el cálculo serial de instrucciones, y múltiples aceleradores (aceleradores gráficos, o many-core), optimizados para el cálculo paralelo. El diseño de un sistema CAP de nueva generación requiere no solo mejorar el rendimiento de cálculo, sino también mejorar la eficiencia energética. La siguiente generación de sistemas requiere mejorar un orden de magnitud en ambas métricas simultáneamente. Esta tesis doctoral explora optimizaciones específicas para sistemas CAP para hacer un mejor uso de los transistores, y para mejorar las prestaciones de forma transparente ejecutando las aplicaciones en múltiples aceleradores en paralelo. Primero, analizamos varios conjuntos de aplicaciones CAP, y las comparamos con aplicaciones para servidores y escritorio, identificando las principales diferencias que nos indican cómo ajustar la arquitectura para CAP. En las aplicaciones CAP, también analizamos la parte secuencial del código y la parte paralela de forma separada, . El resultado de este análisis nos lleva a proponer una arquitectura multiprocesador asimétrica (ACMP) , con un procesador optimizado para el código secuencial, y múltiples procesadores, más pequeños, optimizados para el procesamiento paralelo. Nuestros resultados muestran que reducir el tamaño de las estructuras del front-end (fetch, y predicción de saltos) en los procesadores paralelos nos proporciona un 16% extra de área en el chip, y una reducción de consumo del 7%. Como mejora a nuestra arquitectura ACMP, proponemos explotar el hecho de que todos los procesadores paralelos ejecutan el mismo código al mismo tiempo. Evaluamos una propuesta en que los procesadores paralelos comparten la caché de instrucciones, con la intención de que uno de ellos precargue las instrucciones para los demás procesadores (prefetching), sin aumentar la latencia media de acceso. Nuestra exploración de los distintos parámetros determina que el punto óptimo requiere una interconexión de alto ancho de banda para acceder a la caché compartida, y el uso de unos pocos line buffers para mantener el ancho de banda y la latencia necesarios. Nuestras proyecciones muestran un ahorro adicional del 11% en área y el 5% en energía, sin impacto en el rendimiento. Estos ahorros de área y energía permiten a un multiprocesador incrementar la eficiencia energética, o aumentar el rendimiento añadiendo procesador adicionales. Por último, estudiamos el efecto de usar múltiples aceleradores (GPU) en una arquitectura con tiempo de acceso a memoria no uniforme (NUMA). Una vez alcanzado el límite de número de transistores y tamaño máximo por chip, la siguiente generación de aceleradores deberá utilizar múltiples chips para aumentar el número de procesadores y el ancho de banda de acceso a memoria. Sin embargo, es muy difícil mantener la ilusión de un tiempo de acceso a memoria uniforme en un sistema multi-GPU sin reescribir el código de la aplicación. Nuestra investigación sobre sistemas multi-GPU muestra retos significativos en el diseño de la interconexión entre las GPU y la jerarquía de memorias cache. Nuestros resultados muestran que se puede explotar el comportamiento en fases de las aplicaciones para optimizar la configuración de la interconexión y las cachés de forma dinámica, minimizando el impacto de la arquitectura NUMA. Nuestro diseño mejora el rendimiento de un sistema con una única GPU en 1.5x, 2.3x y 3.2x (el 89%, 84%, y 76% del máximo teórico) usando 2, 4, y 8 GPUs en paralelo. Siendo su implementación posible hoy en dia, los nodos de cálculo con múltiples aceleradores son una alternativa atractiva para futuros sistemas CAP.Postprint (published version
Heterogeneity, High Performance Computing, Self-Organization and the Cloud
application; blueprints; self-management; self-organisation; resource management; supply chain; big data; PaaS; Saas; HPCaa
The Four-C Framework for High Capacity Ultra-Low Latency in 5G Networks: A Review
Network latency will be a critical performance metric for the Fifth Generation (5G) networks
expected to be fully rolled out in 2020 through the IMT-2020 project. The multi-user multiple-input
multiple-output (MU-MIMO) technology is a key enabler for the 5G massive connectivity criterion,
especially from the massive densification perspective. Naturally, it appears that 5G MU-MIMO will
face a daunting task to achieve an end-to-end 1 ms ultra-low latency budget if traditional network
set-ups criteria are strictly adhered to. Moreover, 5G latency will have added dimensions of scalability
and flexibility compared to prior existing deployed technologies. The scalability dimension caters
for meeting rapid demand as new applications evolve. While flexibility complements the scalability
dimension by investigating novel non-stacked protocol architecture. The goal of this review paper
is to deploy ultra-low latency reduction framework for 5G communications considering flexibility
and scalability. The Four (4) C framework consisting of cost, complexity, cross-layer and computing
is hereby analyzed and discussed. The Four (4) C framework discusses several emerging new
technologies of software defined network (SDN), network function virtualization (NFV) and fog
networking. This review paper will contribute significantly towards the future implementation of
flexible and high capacity ultra-low latency 5G communications
- …