Ethernet - a survey on its fields of application

During the last decades, Ethernet progressively became the most widely used local area networking (LAN) technology. Apart from LAN installations, Ethernet became also attractive for many other fields of application, ranging from industry to avionics, telecommunication, and multimedia. The expanded application of this technology is mainly due to its significant assets like reduced cost, backward-compatibility, flexibility, and expandability. However, this new trend raises some problems concerning the services of the protocol and the requirements for each application. Therefore, specific adaptations prove essential to integrate this communication technology in each field of application. Our primary objective is to show how Ethernet has been enhanced to comply with the specific requirements of several application fields, particularly in transport, embedded and multimedia contexts. The paper first describes the common Ethernet LAN technology and highlights its main features. It reviews the most important specific Ethernet versions with respect to each application field’s requirements. Finally, we compare these different fields of application and we particularly focus on the fundamental concepts and the quality of service capabilities of each proposal

Will SDN be part of 5G?

For many, this is no longer a valid question and the case is considered settled with SDN/NFV (Software Defined Networking/Network Function Virtualization) providing the inevitable innovation enablers solving many outstanding management issues regarding 5G. However, given the monumental task of softwarization of radio access network (RAN) while 5G is just around the corner and some companies have started unveiling their 5G equipment already, the concern is very realistic that we may only see some point solutions involving SDN technology instead of a fully SDN-enabled RAN. This survey paper identifies all important obstacles in the way and looks at the state of the art of the relevant solutions. This survey is different from the previous surveys on SDN-based RAN as it focuses on the salient problems and discusses solutions proposed within and outside SDN literature. Our main focus is on fronthaul, backward compatibility, supposedly disruptive nature of SDN deployment, business cases and monetization of SDN related upgrades, latency of general purpose processors (GPP), and additional security vulnerabilities, softwarization brings along to the RAN. We have also provided a summary of the architectural developments in SDN-based RAN landscape as not all work can be covered under the focused issues. This paper provides a comprehensive survey on the state of the art of SDN-based RAN and clearly points out the gaps in the technology.Comment: 33 pages, 10 figure

Multistage Switching Architectures for Software Routers

Software routers based on personal computer (PC) architectures are becoming an important alternative to proprietary and expensive network devices. However, software routers suffer from many limitations of the PC architecture, including, among others, limited bus and central processing unit (CPU) bandwidth, high memory access latency, limited scalability in terms of number of network interface cards, and lack of resilience mechanisms. Multistage PC-based architectures can be an interesting alternative since they permit us to i) increase the performance of single software routers, ii) scale router size, iii) distribute packet manipulation and control functionality, iv) recover from single-component failures, and v) incrementally upgrade router performance. We propose a specific multistage architecture, exploiting PC-based routers as switching elements, to build a high-speed, largesize,scalable, and reliable software router. A small-scale prototype of the multistage router is currently up and running in our labs, and performance evaluation is under wa

Can open-source projects (re-) shape the SDN/NFV-driven telecommunication market?

Telecom network operators face rapidly changing business needs. Due to their dependence on long product cycles they lack the ability to quickly respond to changing user demands. To spur innovation and stay competitive, network operators are investigating technological solutions with a proven track record in other application domains such as open source software projects. Open source software enables parties to learn, use, or contribute to technology from which they were previously excluded. OSS has reshaped many application areas including the landscape of operating systems and consumer software. The paradigmshift in telecommunication systems towards Software-Defined Networking introduces possibilities to benefit from open source projects. Implementing the control part of networks in software enables speedier adaption and innovation, and less dependencies on legacy protocols or algorithms hard-coded in the control part of network devices. The recently proposed concept of Network Function Virtualization pushes the softwarization of telecommunication functionalities even further down to the data plane. Within the NFV paradigm, functionality which was previously reserved for dedicated hardware implementations can now be implemented in software and deployed on generic Commercial Off-The Shelf (COTS) hardware. This paper provides an overview of existing open source initiatives for SDN/NFV-based network architectures, involving infrastructure to orchestration-related functionality. It situates them in a business process context and identifies the pros and cons for the market in general, as well as for individual actors

Design and implementation of the OFELIA FP7 facility: The European OpenFlow testbed

The growth of the Internet in terms of number of devices, the number of networks associated to each device and the mobility of devices and users makes the operation and management of the Internet network infrastructure a very complex challenge. In order to address this challenge, innovative solutions and ideas must be tested and evaluated in real network environments and not only based on simulations or laboratory setups. OFELIA is an European FP7 project and its main objective is to address the aforementioned challenge by building and operating a multi-layer, multi-technology and geographically distributed Future Internet testbed facility, where the network itself is precisely controlled and programmed by the experimenter using the emerging OpenFlow technology. This paper reports on the work done during the first half of the project, the lessons learned as well as the key advantages of the OFELIA facility for developing and testing new networking ideas. An overview on the challenges that have been faced on the design and implementation of the testbed facility is described, including the OFELIA Control Framework testbed management software. In addition, early operational experience of the facility since it was opened to the general public, providing five different testbeds or islands, is described

Path computation in multi-layer networks: Complexity and algorithms

Carrier-grade networks comprise several layers where different protocols coexist. Nowadays, most of these networks have different control planes to manage routing on different layers, leading to a suboptimal use of the network resources and additional operational costs. However, some routers are able to encapsulate, decapsulate and convert protocols and act as a liaison between these layers. A unified control plane would be useful to optimize the use of the network resources and automate the routing configurations. Software-Defined Networking (SDN) based architectures, such as OpenFlow, offer a chance to design such a control plane. One of the most important problems to deal with in this design is the path computation process. Classical path computation algorithms cannot resolve the problem as they do not take into account encapsulations and conversions of protocols. In this paper, we propose algorithms to solve this problem and study several cases: Path computation without bandwidth constraint, under bandwidth constraint and under other Quality of Service constraints. We study the complexity and the scalability of our algorithms and evaluate their performances on real topologies. The results show that they outperform the previous ones proposed in the literature.Comment: IEEE INFOCOM 2016, Apr 2016, San Francisco, United States. To be published in IEEE INFOCOM 2016, \<http://infocom2016.ieee-infocom.org/\&g

Self-healing topology discovery protocol for software defined networks

“© 2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works. http://ieeexplore.ieee.org/document/8319433/”This letter presents the design of a self-healing protocol for automatic discovery and maintenance of the network topology in Software Defined Networks (SDN). The proposed protocol integrates two enhanced features (i.e. layer 2 topology discovery and autonomic fault recovery) in a unified mechanism. This novel approach is validated through simulation experiments using OMNET++. Obtained results show that our protocol discovers and recovers the control topology efficiently in terms of time and message load over a wide range of generated networks.Peer ReviewedPostprint (author's final draft

A Survey on the Path Computation Element (PCE) Architecture

Quality of Service-enabled applications and services rely on Traffic Engineering-based (TE) Label Switched Paths (LSP) established in core networks and controlled by the GMPLS control plane. Path computation process is crucial to achieve the desired TE objective. Its actual effectiveness depends on a number of factors. Mechanisms utilized to update topology and TE information, as well as the latency between path computation and resource reservation, which is typically distributed, may affect path computation efficiency. Moreover, TE visibility is limited in many network scenarios, such as multi-layer, multi-domain and multi-carrier networks, and it may negatively impact resource utilization. The Internet Engineering Task Force (IETF) has promoted the Path Computation Element (PCE) architecture, proposing a dedicated network entity devoted to path computation process. The PCE represents a flexible instrument to overcome visibility and distributed provisioning inefficiencies. Communications between path computation clients (PCC) and PCEs, realized through the PCE Protocol (PCEP), also enable inter-PCE communications offering an attractive way to perform TE-based path computation among cooperating PCEs in multi-layer/domain scenarios, while preserving scalability and confidentiality. This survey presents the state-of-the-art on the PCE architecture for GMPLS-controlled networks carried out by research and standardization community. In this work, packet (i.e., MPLS-TE and MPLS-TP) and wavelength/spectrum (i.e., WSON and SSON) switching capabilities are the considered technological platforms, in which the PCE is shown to achieve a number of evident benefits