Wind Energy and the Turbulent Nature of the Atmospheric Boundary Layer

Wind turbines operate in the atmospheric boundary layer, where they are exposed to the turbulent atmospheric flows. As the response time of wind turbine is typically in the range of seconds, they are affected by the small scale intermittent properties of the turbulent wind. Consequently, basic features which are known for small-scale homogeneous isotropic turbulence, and in particular the well-known intermittency problem, have an important impact on the wind energy conversion process. We report on basic research results concerning the small-scale intermittent properties of atmospheric flows and their impact on the wind energy conversion process. The analysis of wind data shows strongly intermittent statistics of wind fluctuations. To achieve numerical modeling a data-driven superposition model is proposed. For the experimental reproduction and adjustment of intermittent flows a so-called active grid setup is presented. Its ability is shown to generate reproducible properties of atmospheric flows on the smaller scales of the laboratory conditions of a wind tunnel. As an application example the response dynamics of different anemometer types are tested. To achieve a proper understanding of the impact of intermittent turbulent inflow properties on wind turbines we present methods of numerical and stochastic modeling, and compare the results to measurement data. As a summarizing result we find that atmospheric turbulence imposes its intermittent features on the complete wind energy conversion process. Intermittent turbulence features are not only present in atmospheric wind, but are also dominant in the loads on the turbine, i.e. rotor torque and thrust, and in the electrical power output signal. We conclude that profound knowledge of turbulent statistics and the application of suitable numerical as well as experimental methods are necessary to grasp these unique features (...)Comment: Accepted by the Journal of Turbulence on May 17, 201

The Mechanical Behavior of the Cable-in-Conduit Conductor in the ITER Project

Cable-in-conduit conductor (CICC) has wide applications, and this structure is often served to undergo heat force-electromagnetic coupled field in practical utilization, especially in the magnetic confinement fusion (e.g., Tokamak). The mechanical behavior in CICC is of relevance to understanding the mechanical response and cannot be ignored for assessing the safety of these superconducting structures. In this chapter, several mechanical models were established to analyze the mechanical behavior of the CICC in Tokamak device, and the key mechanical problems such as the equivalent mechanical parameters of the superconducting cable, the untwisting behavior in the process of insertion, the buckling behavior of the superconducting wire under the action of the thermo-electromagnetic static load, and the Tcs (current sharing temperature) degradation under the thermo-electromagnetic cyclic loads are studied. Finally, we summarize the existing problems and the future research points on the basis of the previous research results, which will help the related researchers to figure out the mechanical behavior of CICC more easily

Self-reinoculation with fecal flora changes microbiota density and composition leading to an altered bile-acid profile in the mouse small intestine

Background: The upper gastrointestinal tract plays a prominent role in human physiology as the primary site for enzymatic digestion and nutrient absorption, immune sampling, and drug uptake. Alterations to the small intestine microbiome have been implicated in various human diseases, such as non-alcoholic steatohepatitis and inflammatory bowel conditions. Yet, the physiological and functional roles of the small intestine microbiota in humans remain poorly characterized because of the complexities associated with its sampling. Rodent models are used extensively in microbiome research and enable the spatial, temporal, compositional, and functional interrogation of the gastrointestinal microbiota and its effects on the host physiology and disease phenotype. Classical, culture-based studies have documented that fecal microbial self-reinoculation (via coprophagy) affects the composition and abundance of microbes in the murine proximal gastrointestinal tract. This pervasive self-reinoculation behavior could be a particularly relevant study factor when investigating small intestine microbiota. Modern microbiome studies either do not take self-reinoculation into account, or assume that approaches such as single housing mice or housing on wire mesh floors eliminate it. These assumptions have not been rigorously tested with modern tools. Here, we used quantitative 16S rRNA gene amplicon sequencing, quantitative microbial functional gene content inference, and metabolomic analyses of bile acids to evaluate the effects of self-reinoculation on microbial loads, composition, and function in the murine upper gastrointestinal tract. Results: In coprophagic mice, continuous self-exposure to the fecal flora had substantial quantitative and qualitative effects on the upper gastrointestinal microbiome. These differences in microbial abundance and community composition were associated with an altered profile of the small intestine bile acid pool, and, importantly, could not be inferred from analyzing large intestine or stool samples. Overall, the patterns observed in the small intestine of non-coprophagic mice (reduced total microbial load, low abundance of anaerobic microbiota, and bile acids predominantly in the conjugated form) resemble those typically seen in the human small intestine. Conclusions: Future studies need to take self-reinoculation into account when using mouse models to evaluate gastrointestinal microbial colonization and function in relation to xenobiotic transformation and pharmacokinetics or in the context of physiological states and diseases linked to small intestine microbiome and to small intestine dysbiosis

Progress in high field accelerator magnet development by the US LHC Accelerator Research Program

The maximum magnetic field available to guide and focus the proton beams will be the most important factor driving the design of the High Energy LHC. The US LHC Accelerator Research Program (LARP) is a collaboration of US National Laboratories aiming at demonstrating the feasibility of Nb3Sn magnet technology for application to future colliders. While LARP is primarily focused on the requirements of the High-Luminosity LHC (HL-LHC), it is also directly relevant to the High-Energy LHC (HE-LHC). Program results and future directions will be discussed.Comment: 7 pages, contribution to the EuCARD-AccNet-EuroLumi Workshop: The High-Energy Large Hadron Collider, Malta, 14 -- 16 Oct 2010; CERN Yellow Report CERN-2011-003, pp. 30-3

Fully superconducting rectifiers and fluxpumps Part 1: Realized methods for pumping flux

The magnetic and electrical properties of superconductors were a challenge for many inventors and designers to use superconducting materials in the construction of fully superconducting voltage and current sources commonly called fluxpumps. In the past twenty years a large variety of mechanically or electrically driven devices have been proposed and successfully operated.\ud \ud In this review the basic principle of operation of each class of devices is shown and specific material problems and limitations are reported. The review will be published in two parts.\ud \ud Part 1 deals with mechanical devices such as flux compressors and dynamos. Although those devices must have been of great importance for technical application, their construction and operation offered great experience with regard to the properties of superconducting materials, their joint techniques switching and mechanical and magnetic stability under ac and dc conditions.\ud \ud In this part also a start is made with the more promising class of electrically driven rectifier fluxpumps. With these rectifiers, current levels over 10 kA can be obtained with high efficiency

A model for the screen printing of Newtonian fluids

A preliminary investigation into aspects of the off-contact screen-printing process is presented. A mathematical model for the printing of a thin film of Newtonian fluid is proposed, in which the screen is modelled as a permeable membrane, and the entire region above and below the screen is flooded. By drawing upon widely used industrial circuit printing practices, the distinguished limit of greatest interest to this industry is identified. Numerical and asymptotic solutions of this distinguished limit are presented that reproduce many of the features observed in industrial screen-printing