Vehicle to vehicle (V2V) wireless communications

This work focuses on the vehicle-to-vehicle (V2V) communication, its current challenges, future perspective and possible improvement.V2V communication is characterized by the dynamic environment, high mobility, nonpredective scenario, propagation effects, and also communicating antenna's positions. This peculiarity of V2V wireless communication makes channel modelling and the vehicular propagation quite challenging. In this work, firstly we studied the present context of V2V communication also known as Vehicular Ad-hoc Netwok (VANET) including ongoing researches and studies particularly related to Dedicated Short Range Communication (DSRC), specifically designed for automotive uses with corresponding set of protocols and standards. Secondly, we focused on communication models and improvement of these models to make them more suitable, reliable and efficient for the V2V environment. As specifies the standard, OFDM is used in V2V communication, Adaptable OFDM transceiver was designed. Some parameters as performance analytics are used to compare the improvement with the actual situation. For the enhancement of physical layer of V2V communication, this work is focused in the study of MIMO channel instead of SISO. In the designed transceiver both SISO and MIMO were implemented and studied successfully

A Measurement Based Shadow Fading Model for Vehicle-to-Vehicle Network Simulations

The vehicle-to-vehicle (V2V) propagation channel has significant implications on the design and performance of novel communication protocols for vehicular ad hoc networks (VANETs). Extensive research efforts have been made to develop V2V channel models to be implemented in advanced VANET system simulators for performance evaluation. The impact of shadowing caused by other vehicles has, however, largely been neglected in most of the models, as well as in the system simulations. In this paper we present a shadow fading model targeting system simulations based on real measurements performed in urban and highway scenarios. The measurement data is separated into three categories, line-of-sight (LOS), obstructed line-of-sight (OLOS) by vehicles, and non line-of-sight due to buildings, with the help of video information recorded during the measurements. It is observed that vehicles obstructing the LOS induce an additional average attenuation of about 10 dB in the received signal power. An approach to incorporate the LOS/OLOS model into existing VANET simulators is also provided. Finally, system level VANET simulation results are presented, showing the difference between the LOS/OLOS model and a channel model based on Nakagami-m fading.Comment: 10 pages, 12 figures, submitted to Hindawi International Journal of Antennas and Propagatio

Software-only TDOA/RTF positioning for 3G WCDMA wireless network

A hybrid location finding technique based oil time difference of arrival (TDOA) with round-trip time (RTT) measurements is proposed for a wideband code division Multiple access (WCDMA) network. In this technique, a mobile station measures timing from at least three base stations using user equipment receive-transmit (UE Rx-Tx) time difference and at least three base stations measure timing from the mobile station using RTT. The timing measurements of mobile and base stations are then combined to solve for both the location of the mobile and the synchronization offset between base stations. A software-only geolocation system based on the above mobile/base stations timing measurements is implemented in Matlab platform and the performance of the system is investigated using large-scale propagation models

Modeling of wide-band MIMO radio channels based on NLoS indoor measurements

Link to published version (if available)

In-vehicle channel sounding in the 5.8-GHz band

The article reports vehicular channel measurements in the frequency band of 5.8 GHz for IEEE 802.11p standard. Experiments for both intra-vehicle and out-of-vehicle environments were carried out. It was observed that the large-scale variations (LSVs) of the power delay profiles (PDPs) can be best described through a two-term exponential decay model, in contrast to the linear models which are suitable for popular ultra-wideband (UWB) systems operating in the 3- to 11-GHz band. The small-scale variations (SSVs) are separated from the PDP by subtracting the LSV and characterized utilizing logistic, generalized extreme value (GEV), and normal distributions. Two sample Kolmogorov-Smirnov (K-S) tests validated that the logistic distribution is optimal for in-car, whereas the GEV distribution serves better for out-of-car measurements. For each measurement, the LSV trend was used to construct the respective channel impulse response (CIR), i.e., tap gains at different delays. Next, the CIR information is fed to an 802.11p simulation testbed to evaluate the bit error rate (BER) performance, following a Rician model. The BER results strongly vouch for the suitability of the protocol for in-car as well as out-of-car wireless applications in stationary environments.The article reports vehicular channel measurements in the frequency band of 5.8 GHz for IEEE 802.11p standard. Experiments for both intra-vehicle and out-of-vehicle environments were carried out. It was observed that the large-scale variations (LSVs) of the power delay profiles (PDPs) can be best described through a two-term exponential decay model, in contrast to the linear models which are suitable for popular ultra-wideband (UWB) systems operating in the 3- to 11-GHz band. The small-scale variations (SSVs) are separated from the PDP by subtracting the LSV and characterized utilizing logistic, generalized extreme value (GEV), and normal distributions. Two sample Kolmogorov-Smirnov (K-S) tests validated that the logistic distribution is optimal for in-car, whereas the GEV distribution serves better for out-of-car measurements. For each measurement, the LSV trend was used to construct the respective channel impulse response (CIR), i.e., tap gains at different delays. Next, the CIR information is fed to an 802.11p simulation testbed to evaluate the bit error rate (BER) performance, following a Rician model. The BER results strongly vouch for the suitability of the protocol for in-car as well as out-of-car wireless applications in stationary environments

A predefined channel coefficients library for vehicle-to-vehicle communications

It is noticeable that most of VANETs communications tests are assessed through simulation. In a majority of simulation results, the physical layer is often affected by an apparent lack of realism. Therefore, vehicular channel model has become a critical issue in the field of intelligent transport systems (ITS). To overcome the lack of realism problem, a more robust channel model is needed to reflect the reality. This paper provides an open access, predefined channel coefficients library. The library is based on 2x2 and 4x4 Multiple – Input – Multiple – Output (MIMO) systems in V2V communications, using a spatial channel model extended SCME which will help to reduce the overall simulation time. In addition, it provides a more realistic channel model for V2V communications; considering: over ranges of speeds, distances, multipath signals, sub-path signals, different angle of arrivals, different angle departures, no line of sight and line of sight. An intensive evaluation process has taken place to validate the library and acceptance results are produced. Having an open access predefined library, enables the researcher at relevant communities to test and evaluate several complicated vehicular communications scenarios in a wider manners with less time and efforts