14 research outputs found

    Diversified Fluid Antenna Designs for Mobile Communications

    Get PDF
    In current mobile communications, massive MIMO is an essential technology, especially for mm-wave 5G and future 6G mobile systems. However, implementing MIMO antennas for such applications is challenging due to the physical limitations of mobile devices. To address this issue, this study proposes novel surface wave-based fluid antennas. The proposed antennas achieve radiation pattern reconfigurability with a compact design of 10 mm x 33 mm 5 mm at a frequency range of 24 to 30 GHz, which is small enough for portable equipment. These antennas use only one feeding port, simplifying the feeding mechanism compared to MIMO systems that may require multiple RF chains. The fluid channel can also be easily scaled for different shapes and sizes with the proposed surface wave launcher. The proposed fluid antennas were simulated, fabricated, assembled, and measured within UCL facilities. Results show that these antennas achieve radiation pattern diversity, with an average RPDR (radiation pattern dynamic range) of up to 10 dB in the targeted mm-wave 5G frequency bands from 24 to 30 GHz. Radiation pattern dynamic range is a new indicator used to evaluate the proposed fluid antennas' radiation pattern reconfigurability. The proposed antennas offer several notable contributions. Firstly, they demonstrate the successful development of fluid antennas with radiation pattern reconfigurability. Secondly, the antennas feature a relatively simple structure, utilizing a 3D-printed container and PCB board, which enables cost-effective manufacturing and makes the antennas accessible to a wider range of users. Thirdly, the proposed fluid antenna incorporates a fluid control system and a comprehensive measurement setup specifically tailored for fluid antennas. These additions enhance the overall viability and practicality of the antenna design. Lastly, the introduction of the RPDR indicator provides a valuable tool for analyzing the radiation pattern reconfigurability of similar antennas. This indicator facilitates performance comparisons and aids in the refinement of future antenna designs

    Radio Communications

    Get PDF
    In the last decades the restless evolution of information and communication technologies (ICT) brought to a deep transformation of our habits. The growth of the Internet and the advances in hardware and software implementations modified our way to communicate and to share information. In this book, an overview of the major issues faced today by researchers in the field of radio communications is given through 35 high quality chapters written by specialists working in universities and research centers all over the world. Various aspects will be deeply discussed: channel modeling, beamforming, multiple antennas, cooperative networks, opportunistic scheduling, advanced admission control, handover management, systems performance assessment, routing issues in mobility conditions, localization, web security. Advanced techniques for the radio resource management will be discussed both in single and multiple radio technologies; either in infrastructure, mesh or ad hoc networks

    Energy Efficiency in Communications and Networks

    Get PDF
    The topic of "Energy Efficiency in Communications and Networks" attracts growing attention due to economical and environmental reasons. The amount of power consumed by information and communication technologies (ICT) is rapidly increasing, as well as the energy bill of service providers. According to a number of studies, ICT alone is responsible for a percentage which varies from 2% to 10% of the world power consumption. Thus, driving rising cost and sustainability concerns about the energy footprint of the IT infrastructure. Energy-efficiency is an aspect that until recently was only considered for battery driven devices. Today we see energy-efficiency becoming a pervasive issue that will need to be considered in all technology areas from device technology to systems management. This book is seeking to provide a compilation of novel research contributions on hardware design, architectures, protocols and algorithms that will improve the energy efficiency of communication devices and networks and lead to a more energy proportional technology infrastructure

    Bioinformatic analysis of genome-scale data reveals insights into host-pathogen interactions in farm animals

    Get PDF
    This thesis documents the contribution of my bioinformatics research activities, including novel software development, to a range of research projects aimed at investigating the interactions between bacterial and viral pathogens and their hosts. The focus is largely on farm animal species and their pathogens, although some of the research has a wider scientific impact. RNA interference (RNAi) refers to a variety of related regulatory pathways present in animals, plants and insects. The major pathways are microRNAs (miRNAs), small-interfering RNAs (siRNAs) and PIWI-interacting RNAs (piRNAs). Marek’s disease virus is an important pathogen of poultry, causing T-cell lymphoma. We identified the presence and expression patterns of several MDV-encoded microRNAs, including the identification of 5 novel microRNAs. We also showed that not only do virus-encoded microRNAs dominate the mirNome within chicken cells, but also that specific host-microRNAs are down-regulated. We also identify novel virus-encoded microRNAs in other Herpesviridae and provide the first evidence of miRNA evolution by duplication in viruses. In related work, we present a novel microRNA generated by the canonical miRNA biogenesis pathway in Avian Leukosis Virus, another avian oncogenic virus, and publish data showing the expression pattern of known chicken microRNAs across a range of important avian cells. Two of the other RNAi pathways (siRNA and piRNA) form an important part of the antiviral response in arthropods. We have published work demonstrating an siRNA antiviral response to bluetongue virus and Schmallenberg virus in cells from the Culicoides midge, an important insect vector, as well as work demonstrating the importance of the piRNA pathway in the antiviral response to Semliki forest virus (SFV). Further work on flaviviruses in ticks demonstrates the active suppression of the siRNA response by Langat Virus, as well as a key difference between the siRNA responses in Mosquitos compared to ticks. Salmonella is one of the most important zoonoses, with an estimated 1.4 million cases of human salmonellosis per annum in the USA alone. Salmonella infections of farm animals are an important route into the human food chain. This thesis presents work on the comparative structure and function of 13 fimbrial operons within Salmonella enterica serovar Enteritidis as well as a genomic comparison of that serovar with Salmonella enterica serovar Gallinarum, a chicken-specific serovar. We characterised the global expression profile of Salmonella enterica serovar Typhimurium during colonization of the chicken intestine, and we have published the genomes of four strains of Salmonella eneterica serovars of well-defined virulence in food-producing animals. Our work in this area led to us publishing an important and comprehensive review of the automatic annotation of bacterial genomes. Finally, I present work on novel software development. ProGenExpress, a software tool that allows the easy and accurate integration and visualisation of quantitative data with the genome annotation of bacteria; Meta4 is a web application that allows data sharing of bacterial genome annotations from metagenomes; CORNA, a software tool that allows scientists to link together microRNA targets, gene expression and functional annotation; viRome, a software tool for the analysis of siRNA and piRNA responses in virus-infection studies; DetectiV, a software tool for the analysis of pathogen-detection microarray data; and poRe, a software tool that enables users to organise and analyse nanopore sequencing dat

    Limited feedback MIMO techniques for temporally correlated channels and linear receivers

    Get PDF
    Advanced mobile wireless networks will make extensive use of multiantenna (MIMO) transceivers to comply with high requirements of data rates and reliability. The use of feedback channels is of paramount importance to achieve this goal in systems employing frequency division duplexing (FDD). The design of the feedback mechanism is challenging due to the severe constraints imposed by computational complexity and feedback bandwidth restrictions. This thesis addresses the design of transmission strategies in both single-user and multi-user MIMO systems, based on compact feedback messages. First, recursive feedback mechanisms for single-user transmission scenarios are proposed, including stochastic gradient techniques, deterministic updates based on Givens rotations and low computational complexity schemes based on partial update filtering concepts. Thereafter, channel feedback algorithms are proposed, and a convergence analysis for static channels is presented. These algorithms can be used to provide channel side information to any multi-user MIMO solution. A limited-feedback decentralized multi-user MIMO solution is proposed, which avoids the need for explicit channel feedback. A feed-forward technique is proposed, which allows our methods to operate in presence of feedback errors. The performance of all the proposed algorithms is illustrated via link-level simulations, where the effect of different parameter values is assessed. Our results show that the proposed methods outperform existing limited-feedback counterparts over a range of low to medium mobile speeds, for moderate antenna array sizes that are deemed practical for commercial deployment. The computational complexity reduction of some of the proposed algorithms is also shown to be considerable, when compared to existing techniques

    Near-capacity fixed-rate and rateless channel code constructions

    No full text
    Fixed-rate and rateless channel code constructions are designed for satisfying conflicting design tradeoffs, leading to codes that benefit from practical implementations, whilst offering a good bit error ratio (BER) and block error ratio (BLER) performance. More explicitly, two novel low-density parity-check code (LDPC) constructions are proposed; the first construction constitutes a family of quasi-cyclic protograph LDPC codes, which has a Vandermonde-like parity-check matrix (PCM). The second construction constitutes a specific class of protograph LDPC codes, which are termed as multilevel structured (MLS) LDPC codes. These codes possess a PCM construction that allows the coexistence of both pseudo-randomness as well as a structure requiring a reduced memory. More importantly, it is also demonstrated that these benefits accrue without any compromise in the attainable BER/BLER performance. We also present the novel concept of separating multiple users by means of user-specific channel codes, which is referred to as channel code division multiple access (CCDMA), and provide an example based on MLS LDPC codes. In particular, we circumvent the difficulty of having potentially high memory requirements, while ensuring that each user’s bits in the CCDMA system are equally protected. With regards to rateless channel coding, we propose a novel family of codes, which we refer to as reconfigurable rateless codes, that are capable of not only varying their code-rate but also to adaptively modify their encoding/decoding strategy according to the near-instantaneous channel conditions. We demonstrate that the proposed reconfigurable rateless codes are capable of shaping their own degree distribution according to the nearinstantaneous requirements imposed by the channel, but without any explicit channel knowledge at the transmitter. Additionally, a generalised transmit preprocessing aided closed-loop downlink multiple-input multiple-output (MIMO) system is presented, in which both the channel coding components as well as the linear transmit precoder exploit the knowledge of the channel state information (CSI). More explicitly, we embed a rateless code in a MIMO transmit preprocessing scheme, in order to attain near-capacity performance across a wide range of channel signal-to-ratios (SNRs), rather than only at a specific SNR. The performance of our scheme is further enhanced with the aid of a technique, referred to as pilot symbol assisted rateless (PSAR) coding, whereby a predetermined fraction of pilot bits is appropriately interspersed with the original information bits at the channel coding stage, instead of multiplexing pilots at the modulation stage, as in classic pilot symbol assisted modulation (PSAM). We subsequently demonstrate that the PSAR code-aided transmit preprocessing scheme succeeds in gleaning more information from the inserted pilots than the classic PSAM technique, because the pilot bits are not only useful for sounding the channel at the receiver but also beneficial for significantly reducing the computational complexity of the rateless channel decoder

    The Multi-Input Multi-Output (MIMO) Channel Modeling, Simulation and Applications

    Get PDF
    This thesis mainly focus on the Multi-Input Multi-Output (MIMO) channel modeling, simulation and applications. There are several ways to design a MIMO channel. Most of the examples are given in Chapter 2, where we can design channels based on the environments and also based on other conditions. One of the new MIMO channel designs based on physical and virtual channel design is discussed in Unitary-Independent- Unitary (UIU) channel modeling. For completeness, the different types of capacity are discussed in details. The capacity is very important in wireless communication. By understanding the details behind different capacity, we can improve our transmission efficiently and effectively. The level crossing rate and average duration are discussed.One of the most important topics in MIMO wireless communication is estimation. Without having the right estimation in channel prediction, the performance will not be correct. The channel estimation error on the performance of the Alamouti code was discussed. The design of the transmitter, the channel and the receiver for this system model is shown. The two different types of decoding scheme were shown - the linear combining scheme and the Maximum likelihood (ML) decoder. Once the reader understands the estimation of the MIMO channel, the estimation based on different antenna correlation is discussed. Next, the model for Mobile-to-Mobile (M2M) MIMO communication link is proposed. The old M2M Sum-of-Sinusoids simulation model and the new two ring models are discussed. As the last step, the fading channel modeling using AR model is derived and the effect of ill-conditioning of the Yule-Walker equation is also shown. A number of applications is presented to show how the performance can be evaluated using the proposed model and techniques

    Near-Instantaneously Adaptive HSDPA-Style OFDM Versus MC-CDMA Transceivers for WIFI, WIMAX, and Next-Generation Cellular Systems

    No full text
    Burts-by-burst (BbB) adaptive high-speed downlink packet access (HSDPA) style multicarrier systems are reviewed, identifying their most critical design aspects. These systems exhibit numerous attractive features, rendering them eminently eligible for employment in next-generation wireless systems. It is argued that BbB-adaptive or symbol-by-symbol adaptive orthogonal frequency division multiplex (OFDM) modems counteract the near instantaneous channel quality variations and hence attain an increased throughput or robustness in comparison to their fixed-mode counterparts. Although they act quite differently, various diversity techniques, such as Rake receivers and space-time block coding (STBC) are also capable of mitigating the channel quality variations in their effort to reduce the bit error ratio (BER), provided that the individual antenna elements experience independent fading. By contrast, in the presence of correlated fading imposed by shadowing or time-variant multiuser interference, the benefits of space-time coding erode and it is unrealistic to expect that a fixed-mode space-time coded system remains capable of maintaining a near-constant BER
    corecore