735 research outputs found
Timing and Carrier Synchronization in Wireless Communication Systems: A Survey and Classification of Research in the Last 5 Years
Timing and carrier synchronization is a fundamental requirement for any wireless communication system to work properly. Timing synchronization is the process by which a receiver node determines the correct instants of time at which to sample the incoming signal. Carrier synchronization is the process by which a receiver adapts the frequency and phase of its local carrier oscillator with those of the received signal. In this paper, we survey the literature over the last 5 years (2010–2014) and present a comprehensive literature review and classification of the recent research progress in achieving timing and carrier synchronization in single-input single-output (SISO), multiple-input multiple-output (MIMO), cooperative relaying, and multiuser/multicell interference networks. Considering both single-carrier and multi-carrier communication systems, we survey and categorize the timing and carrier synchronization techniques proposed for the different communication systems focusing on the system model assumptions for synchronization, the synchronization challenges, and the state-of-the-art synchronization solutions and their limitations. Finally, we envision some future research directions
Multiuser MIMO-OFDM for Next-Generation Wireless Systems
This overview portrays the 40-year evolution of orthogonal frequency division multiplexing (OFDM) research. The amelioration of powerful multicarrier OFDM arrangements with multiple-input multiple-output (MIMO) systems has numerous benefits, which are detailed in this treatise. We continue by highlighting the limitations of conventional detection and channel estimation techniques designed for multiuser MIMO OFDM systems in the so-called rank-deficient scenarios, where the number of users supported or the number of transmit antennas employed exceeds the number of receiver antennas. This is often encountered in practice, unless we limit the number of users granted access in the base station’s or radio port’s coverage area. Following a historical perspective on the associated design problems and their state-of-the-art solutions, the second half of this treatise details a range of classic multiuser detectors (MUDs) designed for MIMO-OFDM systems and characterizes their achievable performance. A further section aims for identifying novel cutting-edge genetic algorithm (GA)-aided detector solutions, which have found numerous applications in wireless communications in recent years. In an effort to stimulate the cross pollination of ideas across the machine learning, optimization, signal processing, and wireless communications research communities, we will review the broadly applicable principles of various GA-assisted optimization techniques, which were recently proposed also for employment inmultiuser MIMO OFDM. In order to stimulate new research, we demonstrate that the family of GA-aided MUDs is capable of achieving a near-optimum performance at the cost of a significantly lower computational complexity than that imposed by their optimum maximum-likelihood (ML) MUD aided counterparts. The paper is concluded by outlining a range of future research options that may find their way into next-generation wireless systems
Downlink space-frequency preequalization techniques for TDD MC-CDMA mobile radio systems
The paper considers downlink space-frequency preequalizations techniques for time division duplex (TDD) MC-CDMA. We consider the use of antenna arrays at the base station (BS) and analytically derive different preequalization schemes for two different receiver configurations at the mobile terminal: a simple despread receiver without channel equalization and an equal-gain combiner (EGC) conventional receiver. We show that the space-frequency preequalization approach proposed allows to format the transmitted signals so that the multiple access interference at mobile terminals is reduced allowing to transfer the most computational complexity from mobile terminal to the BS. Simulation results are carried out to demonstrate the effectiveness of the proposed preequalization schemes.European project IST-2001-32620 - MATRICEFCT - POSI/CPS/46701/200
Physical layer network coding based communication systems in frequency selective channels
PhD ThesisThe demand for wireless communications is growing every day which requiresmore
speed and bandwidth. In two way relay networks (TWRN), physical
layer network coding (PLNC) was proposed to double the bandwidth. A
TWRN is a system where two end users exchange data through a middle node
called the relay. The two signals are allowed to be physically added before being
broadcasted back to the end users. This system can work smoothly in flat
fading channels, but can not be applied straightforward in frequency selective
channels. In a multipath multi-tap FIR channel, the inter-symbol interference
(ISI) spreads through several symbols. In this case, the symbols at the relay
are not just an addition of the sent symbols but also some of the previous
symbols from both sides. This not only causes a traditional PLNC to fail but
also a simple one equalizer system will not solve the problem. Three main
methods have been proposed by other researchers. The OFDM based PLNC
is the simplest in terms of implementation and complexity but suffers from
the disadvantages of the OFDMlike cyclic prefix overhead and frequency offset.
The main disadvantage, however is the relatively low BER performance
because it is restricted to linear equalizers in the PLNC system. Another
approach is pre-filtering or pre-equalization. This method also has some disadvantages
like complexity, sensitivity to channel variation and the need of
a feedback channel for both end nodes. Finally, the maximum likelihood
sequence detector was also proposed but is restricted to BPSK modulation
and exponentially rising complexity are major drawbacks. The philosophy in
this work is to avoid these disadvantages by using a time domain based system.
The DFE is the equalizer of choice here because it provides a non-trivial
BER performance improvement with very little increase in complexity. In
this thesis, the problem of frequency selective channels in PLNC systems can
be solved by properly adjusting the design of the system including the DFE.
The other option is to redesign the equalizer to meet that goal. An AF DFE
system is proposed in this work that provides very low complexity especially
at the relay with little sensitivity to channel changes. A multi-antenna DNF
DFE system is also proposed here with an improved performance. Finally, a
new equalizer is designed for very low complexity and cost DNF approach
with little sacrifice of BER performance. Matlab was used for the simulations
with Monte Carlo method to verify the findings of this work through finding
the BER performance of each system. This thesis opens the door for future
improvement on the PLNC system. More research needs to be done like testing
the proposed systems in real practical implementation and also the effect
of adding channel coding to these systems.Iraqi Government, Ministry of
Higher Educatio
Design of optimal equalizers and precoders for MIMO channels
Channel equalization has been extensively studied as a method of combating ISI and ICI for high speed MIMO data communication systems. This dissertation focuses on optimal channel equalization in the presence of non-white observation noises with unknown PSD but bounded power-norm. A worst-case approach to optimal design of channel equalizers leads to an equivalent optimal H-infinity filtering problem for the MIMO communication systems. An explicit design algorithm is derived which not only achieves the zero-forcing (ZF) condition, but also minimizes the RMS error between the transmitted symbols and the received symbols. The second part of this dissertation investigates the design of optimal precoders which minimize the bit error rate (BER) subject to a fixed transmit-power constraint for the multiple antennas downlink communication channels under the perfect reconstruction (PR) condition. The closed form solutions are derived and an efficient design algorithm is proposed. The performance evaluations indicate that the optimal precoder design for multiple antennas communication systems proposed herein is an attractive/reasonable alternative to the existing precoder design techniques
Smart antennas: state of the art
Aim of this contribution is to illustrate the state of the art of smart antenna research from several perspectives. The bow is drawn from transmitter issues via channel measurements and modeling, receiver signal processing, network aspects, technological challenges towards first smart antenna applications and current status of standardization. Moreover, some future prospects of different disciplines in smart antenna research are given.Peer Reviewe
- …