99 research outputs found

    Network Time-Synchronization in TDD Based LTE-Advanced Systems

    Get PDF

    Effect of Synchronizing Coordinated Base Stations on Phase Noise Estimation

    Get PDF
    In this paper, we study the problem of oscillator phase noise (PN) estimation in coordinated multi-point (CoMP) transmission systems. Specifically, we investigate the effect of phase synchronization between coordinated base stations (BSs) on PN estimation at the user receiver (downlink channel). In this respect, the Bayesian Cram\'er-Rao bound for PN estimation is derived which is a function of the level of phase synchronization between the coordinated BSs. Results show that quality of BS synchronization has a significant effect on the PN estimation

    Modeling Interference Between OFDM/OQAM and CP-OFDM: Limitations of the PSD-Based Model

    Get PDF
    To answer the challenges put out by the next generation of wireless networks (5G), important research efforts have been undertaken during the last few years to find new waveforms that are better spectrally localized and less sensitive to asynchronism effects than the widely deployed Cyclic Prefix Orthogonal Frequency Division Multiplexing (CP-OFDM). One of the most studied schemes is OFDM-Offset Quadrature Amplitude Modulation (OFDM/OQAM) based on the PHYDYAS filter pulse. In the recent literature, spectrum coexistence between OFDM/OQAM and CP-OFDM is commonly studied based on the Power Spectral Density (PSD) model. In this paper, we show that this approach is flawed and we show that the actual interference injected by OFDM/OQAM systems onto CP-OFDM is much higher than what is classically expected with the PSD based model in the literature. We show that though using OFDM/OQAM in secondary systems is still advantageous, it brings limited gain in the context of coexistence with incumbent CP-OFDM systems.Comment: 7 pages, 9 figures, ICT 201

    Real-Time Localization Using Software Defined Radio

    Get PDF
    Service providers make use of cost-effective wireless solutions to identify, localize, and possibly track users using their carried MDs to support added services, such as geo-advertisement, security, and management. Indoor and outdoor hotspot areas play a significant role for such services. However, GPS does not work in many of these areas. To solve this problem, service providers leverage available indoor radio technologies, such as WiFi, GSM, and LTE, to identify and localize users. We focus our research on passive services provided by third parties, which are responsible for (i) data acquisition and (ii) processing, and network-based services, where (i) and (ii) are done inside the serving network. For better understanding of parameters that affect indoor localization, we investigate several factors that affect indoor signal propagation for both Bluetooth and WiFi technologies. For GSM-based passive services, we developed first a data acquisition module: a GSM receiver that can overhear GSM uplink messages transmitted by MDs while being invisible. A set of optimizations were made for the receiver components to support wideband capturing of the GSM spectrum while operating in real-time. Processing the wide-spectrum of the GSM is possible using a proposed distributed processing approach over an IP network. Then, to overcome the lack of information about tracked devices’ radio settings, we developed two novel localization algorithms that rely on proximity-based solutions to estimate in real environments devices’ locations. Given the challenging indoor environment on radio signals, such as NLOS reception and multipath propagation, we developed an original algorithm to detect and remove contaminated radio signals before being fed to the localization algorithm. To improve the localization algorithm, we extended our work with a hybrid based approach that uses both WiFi and GSM interfaces to localize users. For network-based services, we used a software implementation of a LTE base station to develop our algorithms, which characterize the indoor environment before applying the localization algorithm. Experiments were conducted without any special hardware, any prior knowledge of the indoor layout or any offline calibration of the system

    2nd Joint ERCIM eMobility and MobiSense Workshop

    Get PDF

    Timing and Carrier Synchronization in Wireless Communication Systems: A Survey and Classification of Research in the Last 5 Years

    Get PDF
    Timing and carrier synchronization is a fundamental requirement for any wireless communication system to work properly. Timing synchronization is the process by which a receiver node determines the correct instants of time at which to sample the incoming signal. Carrier synchronization is the process by which a receiver adapts the frequency and phase of its local carrier oscillator with those of the received signal. In this paper, we survey the literature over the last 5 years (2010–2014) and present a comprehensive literature review and classification of the recent research progress in achieving timing and carrier synchronization in single-input single-output (SISO), multiple-input multiple-output (MIMO), cooperative relaying, and multiuser/multicell interference networks. Considering both single-carrier and multi-carrier communication systems, we survey and categorize the timing and carrier synchronization techniques proposed for the different communication systems focusing on the system model assumptions for synchronization, the synchronization challenges, and the state-of-the-art synchronization solutions and their limitations. Finally, we envision some future research directions

    Korkean luotettavuuden verkkohallinteiset laitteiden väliset yhteydet

    Get PDF
    Fifth generation cellular networks aim to provide new types of services. Prominent amongst these are industrial automation and vehicle-to-vehicle communications. Such new use cases demand lower latencies and higher reliability along with greater flexibility than current and past generations of cellular technologies allow. Enabling these new service types requires the introduction of device-to-device communications (D2D). This work investigated network-controlled D2D schemes wherein cellular base stations retain control over spectrum usage. D2D nodes assemble into clusters. Each D2D cluster then organises itself as it sees fit within the constraints imposed by the cellular network. A review of proposed D2D control schemes was conducted to identify pertinent interference issues. Measurements were then devised to empirically collect quantitative data on the impact of this interference. Measurements were conducted using a software-defined radio (SDR) platform. An SDR based system was selected to enable a low cost and highly flexible iterative approach to development while still providing the accuracy of real-world measurement. D2D functionality was added to the chosen SDR system with the essential parts of Long Term Evolution Release 8 implemented. Two series of measurements were performed. The first aimed to determine the adjacent channel interference impact of a cellular user being located near a D2D receiver. The second measurement series collected data on the co-channel interference of spectrum re-use between a D2D link and a moving cellular transmitter. Based on these measurements it was determined that D2D communications within a cellular system is feasible. Furthermore, the required frequency of channel state information reporting as a function of node velocity was determined.Viidennen sukupolven solukkoverkoilla pyritään mahdollistamaan uudentyyppisiä palveluja kuten teollisuusautomatiikkaa ja ajoneuvojen välistä viestintää. Tämänkaltaiset uudet käyttötarkoitukset vaativat lyhyempien viiveiden ja korkeammat luotettavuuden ohella myös suurempaa joustavuutta kuin minkä nykyisen sukupolven matkapuhelinverkkoteknologiat sallivat. Edellä mainittujen uusien palvelujen toteuttaminen vaatii suoria laitteiden välisiä yhteyksiä (engl. D2D). Tässä diplomityössä keskityttiin tutkimaan verkkohallinteisia D2D-rakenteita, joissa solukkoverkko hallinnoi spektrin käyttöä. D2D-päätteet liittyvät yhteen muodostaakseen klustereita, jotka hallinnoivat sisäistä tietoliikennettään parhaaksi katsomallaan tavalla solukkoverkon asettamien rajoitusten puitteissa. Kirjallisuuskatsauksen avulla selvitettiin aiemmissa tutkimuksissa esitetyille D2D-ratkaisuille yhteiset interferenssiongelmat. Näiden vaikutusta ja suuruutta tutkittiin mittausten avulla. Mittaukset toteutettiin ohjelmistoradioalustan (engl. SDR) avulla. SDR-pohjaisen järjestelmän käyttö mahdollisti edullisen ja joustavan tavan kerätä empiirisiä mittaustuloksia. D2D-toiminnallisuus lisättiin Long Term Evolution Release 8:n olennaiset ominaisuudet omaavaan alustaan. Tällä alustalla toteutettiin kaksi mittaussarjaa. Ensimmäisellä kerättiin tuloksia viereisellä kanavalla toimivan matkapuhelimen D2D-vastaanottimelle aiheuttamasta interferenssistä näiden ollessa toistensa läheisyydessä. Toisella mittaussarjalla selvitettiin samalla kanavalla toimivan D2D-yhteyden ja liikkuvan matkapuhelimen välistä interferenssiä. Mittausten perusteella todettiin D2D-toiminnallisuuden lisäämisen solukkoverkkoon olevan mahdollista. Lisäksi laskettiin vaadittava kanavalaadun päivitystiheys päätteiden nopeuden funktiona

    Whitepaper on New Localization Methods for 5G Wireless Systems and the Internet-of-Things

    Get PDF
    corecore