Timing and Carrier Synchronization in Wireless Communication Systems: A Survey and Classification of Research in the Last 5 Years

Timing and carrier synchronization is a fundamental requirement for any wireless communication system to work properly. Timing synchronization is the process by which a receiver node determines the correct instants of time at which to sample the incoming signal. Carrier synchronization is the process by which a receiver adapts the frequency and phase of its local carrier oscillator with those of the received signal. In this paper, we survey the literature over the last 5 years (2010–2014) and present a comprehensive literature review and classification of the recent research progress in achieving timing and carrier synchronization in single-input single-output (SISO), multiple-input multiple-output (MIMO), cooperative relaying, and multiuser/multicell interference networks. Considering both single-carrier and multi-carrier communication systems, we survey and categorize the timing and carrier synchronization techniques proposed for the different communication systems focusing on the system model assumptions for synchronization, the synchronization challenges, and the state-of-the-art synchronization solutions and their limitations. Finally, we envision some future research directions

Review of Distributed Beamforming, Journal of Telecommunications and Information Technology, 2011, nr 1

As the capabilities of individual nodes in wireless sensor networks increase, so does the opportunity to perform more complicated tasks, such as cooperative distributed beam- forming to improve the range of communications and save precious battery power during the transmission. This work presents a review of the current literature focused on implementing distributed beamformers; covering the calculation of ideal beamforming weights, practical considerations such as carrier alignment, smart antennas based on distributed beamformers, and open research problems in the field of distributed beamforming

Performance Evaluation of an Energy-Efficient MAC Scheduler by using a Test Bed Approach

A Wireless Sensor Network consists of a large number of sensor nodes that are usually battery powered and deployed in large areas in which changing or recharging batteries may be impractical or completely unfeasible. Therefore, energy efficiency represents one of the main design objectives for these networks. Since most of the energy is consumed by the radio communication, the development of Medium Access Control protocols able to minimize the radio energy consumption is a very attractive research area. This paper presents an energy efficient communication protocol and its implementation in the Contiki Operating System. The performances and the portability of the proposed solution are thoroughly evaluated by means of both simulations, carried out using the Contiki simulation tools (i.e., Cooja and MPSim), and test beds based on two different platforms. Obtained results show that the proposed scheme significantly reduces the sensor nodes power consumption compared to the IEEE 802.15.4 standard solution already implemented in Contiki

Real-Time Localization Using Software Defined Radio

Service providers make use of cost-effective wireless solutions to identify, localize, and possibly track users using their carried MDs to support added services, such as geo-advertisement, security, and management. Indoor and outdoor hotspot areas play a significant role for such services. However, GPS does not work in many of these areas. To solve this problem, service providers leverage available indoor radio technologies, such as WiFi, GSM, and LTE, to identify and localize users. We focus our research on passive services provided by third parties, which are responsible for (i) data acquisition and (ii) processing, and network-based services, where (i) and (ii) are done inside the serving network. For better understanding of parameters that affect indoor localization, we investigate several factors that affect indoor signal propagation for both Bluetooth and WiFi technologies. For GSM-based passive services, we developed first a data acquisition module: a GSM receiver that can overhear GSM uplink messages transmitted by MDs while being invisible. A set of optimizations were made for the receiver components to support wideband capturing of the GSM spectrum while operating in real-time. Processing the wide-spectrum of the GSM is possible using a proposed distributed processing approach over an IP network. Then, to overcome the lack of information about tracked devices’ radio settings, we developed two novel localization algorithms that rely on proximity-based solutions to estimate in real environments devices’ locations. Given the challenging indoor environment on radio signals, such as NLOS reception and multipath propagation, we developed an original algorithm to detect and remove contaminated radio signals before being fed to the localization algorithm. To improve the localization algorithm, we extended our work with a hybrid based approach that uses both WiFi and GSM interfaces to localize users. For network-based services, we used a software implementation of a LTE base station to develop our algorithms, which characterize the indoor environment before applying the localization algorithm. Experiments were conducted without any special hardware, any prior knowledge of the indoor layout or any offline calibration of the system