Multiprocessor System-on-Chips based Wireless Sensor Network Energy Optimization

Wireless Sensor Network (WSN) is an integrated part of the Internet-of-Things (IoT) used to monitor the physical or environmental conditions without human intervention. In WSN one of the major challenges is energy consumption reduction both at the sensor nodes and network levels. High energy consumption not only causes an increased carbon footprint but also limits the lifetime (LT) of the network. Network-on-Chip (NoC) based Multiprocessor System-on-Chips (MPSoCs) are becoming the de-facto computing platform for computationally extensive real-time applications in IoT due to their high performance and exceptional quality-of-service. In this thesis a task scheduling problem is investigated using MPSoCs architecture for tasks with precedence and deadline constraints in order to minimize the processing energy consumption while guaranteeing the timing constraints. Moreover, energy-aware nodes clustering is also performed to reduce the transmission energy consumption of the sensor nodes. Three distinct problems for energy optimization are investigated given as follows: First, a contention-aware energy-efficient static scheduling using NoC based heterogeneous MPSoC is performed for real-time tasks with an individual deadline and precedence constraints. An offline meta-heuristic based contention-aware energy-efficient task scheduling is developed that performs task ordering, mapping, and voltage assignment in an integrated manner. Compared to state-of-the-art scheduling our proposed algorithm significantly improves the energy-efficiency. Second, an energy-aware scheduling is investigated for a set of tasks with precedence constraints deploying Voltage Frequency Island (VFI) based heterogeneous NoC-MPSoCs. A novel population based algorithm called ARSH-FATI is developed that can dynamically switch between explorative and exploitative search modes at run-time. ARSH-FATI performance is superior to the existing task schedulers developed for homogeneous VFI-NoC-MPSoCs. Third, the transmission energy consumption of the sensor nodes in WSN is reduced by developing ARSH-FATI based Cluster Head Selection (ARSH-FATI-CHS) algorithm integrated with a heuristic called Novel Ranked Based Clustering (NRC). In cluster formation parameters such as residual energy, distance parameters, and workload on CHs are considered to improve LT of the network. The results prove that ARSH-FATI-CHS outperforms other state-of-the-art clustering algorithms in terms of LT.University of Derby, Derby, U

Energy-Aware Scheduling of Conditional Task Graphs on NoC-Based MPSoCs

We investigate the problem of scheduling a set of tasks with individual deadlines and conditional precedence constraints on a heterogeneous Network on Chip (NoC)-based Multi-Processor System-on-Chip (MPSoC) such that the total expected energy consumption of all the tasks is minimized, and propose a novel approach. Our approach consists of a scheduling heuristic for constructing a single unified schedule for all the tasks and assigning a frequency to each task and each communication assuming continuous frequencies, an Integer Linear Programming (ILP)-based algorithm and a polynomial time heuristic for assigning discrete frequencies and voltages to tasks and communications. We have performed experiments on 16 synthetic and 4 real-world benchmarks. The experimental results show that compared to the state-of-the-art approach, our approach using the ILP-based algorithm and our approach using the polynomial-time heuristic achieve average improvements of 31% and 20%, respectively, in terms of energy reduction

A Survey and Comparative Study of Hard and Soft Real-time Dynamic Resource Allocation Strategies for Multi/Many-core Systems

Multi-/many-core systems are envisioned to satisfy the ever-increasing performance requirements of complex applications in various domains such as embedded and high-performance computing. Such systems need to cater to increasingly dynamic workloads, requiring efficient dynamic resource allocation strategies to satisfy hard or soft real-time constraints. This article provides an extensive survey of hard and soft real-time dynamic resource allocation strategies proposed since the mid-1990s and highlights the emerging trends for multi-/many-core systems. The survey covers a taxonomy of the resource allocation strategies and considers their various optimization objectives, which have been used to provide comprehensive comparison. The strategies employ various principles, such as market and biological concepts, to perform the optimizations. The trend followed by the resource allocation strategies, open research challenges, and likely emerging research directions have also been provided

Flexible and Distributed Real-Time Control on a 4G Telecom MPSoC

International audienceApplications like 4G baseband modem require single-chip implementation to meet the integration and power consumption requirements. These applications demand a high computing performance with real-time constraints, low-power consumption and low cost. With the rapid evolution of telecom standards and the increasing demand for multi-standard products, the need for exible baseband solutions is growing. The concept of Multi-Processor System-on-Chip (MPSoC) is well adapted to enable hardware reuse between products and between multiple wireless standards in the same device. Based on the experience of two heterogeneous Software Defined Radio (SDR) telecom chipsets, this paper presents a distributed control architecture for the homoGENEous Processor arraY (GENEPY) platform for 4G applications. This MPSoC platform is built with telecom baseband processors interconnected with a Network-on-Chip. The control is performed by a MIPS processor embedded in each baseband processor. This control processor can locally reconfigure and schedule the applications with real-time telecom constraints

Framework for simulation of fault tolerant heterogeneous multiprocessor system-on-chip

Due to the ever growing requirement in high performance data computation, current Uniprocessor systems fall short of hand to meet critical real-time performance demands in (i) high throughput (ii) faster processing time (iii) low power consumption (iv) design cost and time-to-market factors and more importantly (v) fault tolerant processing. Shifting the design trend to MPSOCs is a work-around to meet these challenges. However, developing efficient fault tolerant task scheduling and mapping techniques requires optimized algorithms that consider the various scenarios in Multiprocessor environments. Several works have been done in the past few years which proposed simulation based frameworks for scheduling and mapping strategies that considered homogenous systems and error avoidance techniques. However, most of these works inadequately describe today\u27s MPSOC trend because they were focused on the network domain and didn\u27t consider heterogeneous systems with fault tolerant capabilities; In order to address these issues, this work proposes (i) a performance driven scheduling algorithm (PD SA) based on simulated annealing technique (ii) an optimized Homogenous-Workload-Distribution (HWD) Multiprocessor task mapping algorithm which considers the dynamic workload on processors and (iii) a dynamic Fault Tolerant (FT) scheduling/mapping algorithm to employ robust application processing system. The implementation was accompanied by a heterogeneous Multiprocessor system simulation framework developed in systemC/C++. The proposed framework reads user data, set the architecture, execute input task graph and finally generate performance variables. This framework alleviates previous work issues with respect to (i) architectural flexibility in number-of-processors, processor types and topology (ii) optimized scheduling and mapping strategies and (iii) fault-tolerant processing capability focusing more on the computational domain; A set of random as well as application specific STG benchmark suites were run on the simulator to evaluate and verify the performance of the proposed algorithms. The simulations were carried out for (i) scheduling policy evaluation (ii) fault tolerant evaluation (iii) topology evaluation (iv) Number of processor evaluation (v) Mapping policy evaluation and (vi) Processor Type evaluation. The results showed that PD scheduling algorithm showed marginally better performance than EDF with respect to utilization, Execution-Time and Power factors. The dynamic Fault Tolerant implementation showed to be a viable and efficient strategy to meet real-time constraints without posing significant system performance degradation. Torus topology gave better performance than Tile with respect to task completion time and power factors. Executing highly heterogeneous Tasks showed higher power consumption and execution time. Finally, increasing the number of processors showed a decrease in average Utilization but improved task completion time and power consumption; Based on the simulation results, the system designer can compare tradeoffs between a various design choices with respect to the performance requirement specifications. In general, designing an optimized Multiprocessor scheduling and mapping strategy with added fault tolerant capability will enable to develop efficient Multiprocessor systems which meet future performance goal requirements. This is the substance of this work

DKPN: A Composite Dataflow/Kahn Process Networks Execution Model

International audienceTo address the high level of dynamism and variability in modern streaming applications (e.g. video decoding) as well as the difficulties in programming heterogeneous MPSoCs, we propose a novel execution model based upon both dataflow and Kahn process networks. This paper presents the semantics and properties of this hierarchical and parametric model, called DKPN. Parameters are classified and it is shown that hints can be derived to improve the execution. A scheduler framework and policies to back the model are also exposed. Experiments illustrate the benefits of our approach