Adoption of vehicular ad hoc networking protocols by networked robots

This paper focuses on the utilization of wireless networking in the robotics domain. Many researchers have already equipped their robots with wireless communication capabilities, stimulated by the observation that multi-robot systems tend to have several advantages over their single-robot counterparts. Typically, this integration of wireless communication is tackled in a quite pragmatic manner, only a few authors presented novel Robotic Ad Hoc Network (RANET) protocols that were designed specifically with robotic use cases in mind. This is in sharp contrast with the domain of vehicular ad hoc networks (VANET). This observation is the starting point of this paper. If the results of previous efforts focusing on VANET protocols could be reused in the RANET domain, this could lead to rapid progress in the field of networked robots. To investigate this possibility, this paper provides a thorough overview of the related work in the domain of robotic and vehicular ad hoc networks. Based on this information, an exhaustive list of requirements is defined for both types. It is concluded that the most significant difference lies in the fact that VANET protocols are oriented towards low throughput messaging, while RANET protocols have to support high throughput media streaming as well. Although not always with equal importance, all other defined requirements are valid for both protocols. This leads to the conclusion that cross-fertilization between them is an appealing approach for future RANET research. To support such developments, this paper concludes with the definition of an appropriate working plan

FIToplankton: Wireless Controlled Remotely-operated Underwater Vehicle (ROV) for Shallow Water Exploratio

Remotely Operated Vehicle (ROV) for underwater exploration is typically controlled using umbilical cable connected to ground control station. Unfortunately, while it’s used for power distribution and data transmission, it also obstruct the movement of ROV especially for shallow water (<50 cm). This paper proposed an alternative method for controlling ROV using wireless remote control system. This work also aims to explore the possibility of using RF wireless technology between 420-450 MHz as underwater communication system. Furthermore, the control system was used to manage actuators i.e. DC motor and bilge pump for maneuvring and picking small size cargo. To help the ROV to hold on a desired, Inertial Measurement Unit (IMU) is installed on board ROV within maximum deviation 0.2 m/s2. The prototype of the system has been successfully implemented and evaluated to confirm the  functionality and the feasibility of the proposed approach

An Autonomous Surface Vehicle for Long Term Operations

Environmental monitoring of marine environments presents several challenges: the harshness of the environment, the often remote location, and most importantly, the vast area it covers. Manual operations are time consuming, often dangerous, and labor intensive. Operations from oceanographic vessels are costly and limited to open seas and generally deeper bodies of water. In addition, with lake, river, and ocean shoreline being a finite resource, waterfront property presents an ever increasing valued commodity, requiring exploration and continued monitoring of remote waterways. In order to efficiently explore and monitor currently known marine environments as well as reach and explore remote areas of interest, we present a design of an autonomous surface vehicle (ASV) with the power to cover large areas, the payload capacity to carry sufficient power and sensor equipment, and enough fuel to remain on task for extended periods. An analysis of the design and a discussion on lessons learned during deployments is presented in this paper.Comment: In proceedings of MTS/IEEE OCEANS, 2018, Charlesto

Sensing and connection systems for assisted and autonomous driving and unmanned vehicles

The special issue, “Sensors, Wireless Connectivity and Systems for Autonomous Vehicles and Smart Mobility” on MDPI Sensors presents 12 accepted papers, with authors from North America, Asia, Europe and Australia, related to the emerging trends in sensing and navigation systems (i.e., sensors plus related signal processing and understanding techniques in multi-agent and cooperating scenarios) for autonomous vehicles, including also unmanned aerial and underwater ones

An Optimized, Data Distribution Service-Based Solution for Reliable Data Exchange Among Autonomous Underwater Vehicles

Major challenges are presented when managing a large number of heterogeneous vehicles that have to communicate underwater in order to complete a global mission in a cooperative manner. In this kind of application domain, sending data through the environment presents issues that surpass the ones found in other overwater, distributed, cyber-physical systems (i.e., low bandwidth, unreliable transport medium, data representation and hardware high heterogeneity). This manuscript presents a Publish/Subscribe-based semantic middleware solution for unreliable scenarios and vehicle interoperability across cooperative and heterogeneous autonomous vehicles. The middleware relies on different iterations of the Data Distribution Service (DDS) software standard and their combined work between autonomous maritime vehicles and a control entity. It also uses several components with different functionalities deemed as mandatory for a semantic middleware architecture oriented to maritime operations (device and service registration, context awareness, access to the application layer) where other technologies are also interweaved with middleware (wireless communications, acoustic networks). Implementation details and test results, both in a laboratory and a deployment scenario, have been provided as a way to assess the quality of the system and its satisfactory performanceEuropean Commission H2020. SWARMs European project (Smart and Networking Underwater Robots in Cooperation Meshes), under Grant Agreement No. 662107-SWARMs-ECSEL-2014-1, partially supported by the ECSEL JU, the Spanish Ministry of Economy and Competitiveness (Ref: PCIN-2014-022-C02-02)

Subsea inspection and monitoring challenges

Master's thesis in Offshore technology : industrial asset managementThis paper uncovers and suggests solutions for the challenges to control change over time more reliable and cost effective. Front-end concept engineering, design, inspection and monitoring strategies, technologies, systems and methods for Life-of-Field are recommended. Autonomous underwater vehicles (AUV) are identified as a possible cost- efficient opportunity to reduce cost of inspections and monitoring operations while safeguarding asset integrity. A recognized design spiral methodology is used to perform a front-end concept evaluation of an AUV system. Investigation of key technological limitations and new developments within underwater communication, energy storage and wireless power transmission is performed. It further enables opportunities such as AUV recharging station on the seafloor for better utilization. One major learning point is through the use of numerical models and the outcome being a better and more hydro effective hull design. One expectation from this paper may be the aid to collaborating partners in their design work