10,984 research outputs found
Student ownership of projects in an upper-division optics laboratory course: A multiple case study of successful experiences
We investigate students' sense of ownership of multiweek final projects in an
upper-division optics lab course. Using a multiple case study approach, we
describe three student projects in detail. Within-case analyses focused on
identifying key issues in each project, and constructing chronological
descriptions of those events. Cross-case analysis focused on identifying
emergent themes with respect to five dimensions of project ownership: student
agency, instructor mentorship, peer collaboration, interest and value, and
affective responses. Our within- and cross-case analyses yielded three major
findings. First, coupling division of labor with collective brainstorming can
help balance student agency, instructor mentorship, and peer collaboration.
Second, students' interest in the project and perceptions of its value can
increase over time; initial student interest in the project topic is not a
necessary condition for student ownership of the project. Third, student
ownership is characterized by a wide range of emotions that fluctuate as
students alternate between extended periods of struggle and moments of success
while working on their projects. These findings not only extend the literature
on student ownership into a new educational domain---namely, upper-division
physics labs---they also have concrete implications for the design of
experimental physics projects in courses for which student ownership is a
desired learning outcome. We describe the course and projects in sufficient
detail that others can adapt our results to their particular contexts.Comment: 22 pages, 3 tables, submitted to Phys. Rev. PE
Phase-coherent lightwave communications with frequency combs
Fiber-optical networks are a crucial telecommunication infrastructure in
society. Wavelength division multiplexing allows for transmitting parallel data
streams over the fiber bandwidth, and coherent detection enables the use of
sophisticated modulation formats and electronic compensation of signal
impairments. In the future, optical frequency combs may replace multiple lasers
used for the different wavelength channels. We demonstrate two novel signal
processing schemes that take advantage of the broadband phase coherence of
optical frequency combs. This approach allows for a more efficient estimation
and compensation of optical phase noise in coherent communication systems,
which can significantly simplify the signal processing or increase the
transmission performance. With further advances in space division multiplexing
and chip-scale frequency comb sources, these findings pave the way for compact
energy-efficient optical transceivers.Comment: 17 pages, 9 figure
Channel Estimation in Multicarrier Communication Systems
The data rate and spectrum efficiency of wireless mobile communications have been significantly improved over the last decade or so. Recently, the advanced systems such as 3GPP LTE and terrestrial digital TV broadcasting have been
sophisticatedly developed using OFDM and CDMA technology. In general, most mobile communication systems transmit bits of information in the radio space to the receiver. The radio channels in mobile radio systems are usually multipath fading channels, which cause inter-symbol interference (ISI) in the received signal. To remove ISI from the signal, there is a need of strong equalizer which requires knowledge on the channel impulse response (CIR).This is primarily provided by a separate channel estimator. Usually the channel estimation is based on the known sequence of bits, which is unique for a certain transmitter and which is repeated in every transmission burst. Thus, the channel estimator is able to estimate CIR for each burst separately by exploiting the known transmitted bits and the corresponding received samples.
In this thesis we investigate and compare various efficient channel estimation schemes for OFDM systems which can also be extended to MC DS-CDMA systems.The channel estimation can be performed by either inserting pilot tones into all subcarriers of OFDM symbols with a specific period or inserting pilot tones into each OFDM symbol. Two major types of pilot arrangement such as block type and comb type
pilot have been focused employing Least Square Error (LSE) and Minimum Mean Square Error (MMSE) channel estimators. Block type pilot sub-carriers is especially suitable for slow-fading radio channels whereas comb type pilots provide
better resistance to fast fading channels. Also comb type pilot arrangement is sensitive to frequency selectivity when comparing to block type arrangement. However, there is
another supervised technique called Implicit Training (IT) based channel estimation which exploits the first order statistics in the received data, induced by superimposing
periodic training sequences with good correlation properties, along with the information symbols. Hence, the need for additional time slots for training the equalizer is avoided. The performance of the estimators is presented in terms of the mean square estimation error (MSEE) and bit error rate (BER)
Fibre segment interferometry using code-division multiplexed optical signal processing for strain sensing applications
A novel optical signal processing scheme for multiplexing fibre segment interferometers is proposed. The continuous-wave, homodyne technique combines code-division multiplexing with single-sideband modulation. It uses only one electro-optic phase modulator to achieve both range separation and quadrature interferometric phase measurement. This scheme is applied to fibre segment interferometry, where a number of long-gauge length interferometric fibre sensors are formed by subtracting pairs of signals from equidistantly placed, weak back reflectors. In this work we give a detailed account of the signal processing involved and, in particular, explore aspects such as electronic bandwidth requirements, noise, crosstalk and linearity, which are important design considerations. A signal bandwidth of ±20 kHz permits the resolution of phase change rates of 2.5 × 104 rad s-1 for each of the four 16.5 m long segments in our setup. We show that dynamic strain resolutions below 0.2 nanostrain Hz-0.5 at 2 m sensor gauge length are achievable, even with an inexpensive diode laser. When used in applications that require only relative strain change measurements, this scheme compares well to more established techniques and can provide high-fidelity yet cost-effective measurements
Large Eddy Simulations of gaseous flames in gas turbine combustion chambers
Recent developments in numerical schemes, turbulent combustion models and the regular increase of computing power allow Large Eddy Simulation (LES) to be applied to real industrial burners. In this paper, two types of LES in complex geometry combustors and of specific interest for aeronautical gas turbine burners are reviewed: (1) laboratory-scale combustors, without compressor or turbine, in which advanced measurements are possible and (2) combustion chambers of existing engines operated in realistic operating conditions. Laboratory-scale burners are designed to assess modeling and funda- mental flow aspects in controlled configurations. They are necessary to gauge LES strategies and identify potential limitations. In specific circumstances, they even offer near model-free or DNS-like LES computations. LES in real engines illustrate the potential of the approach in the context of industrial burners but are more difficult to validate due to the limited set of available measurements. Usual approaches for turbulence and combustion sub-grid models including chemistry modeling are first recalled. Limiting cases and range of validity of the models are specifically recalled before a discussion on the numerical breakthrough which have allowed LES to be applied to these complex cases. Specific issues linked to real gas turbine chambers are discussed: multi-perforation, complex acoustic impedances at inlet and outlet, annular chambers.. Examples are provided for mean flow predictions (velocity, temperature and species) as well as unsteady mechanisms (quenching, ignition, combustion instabil- ities). Finally, potential perspectives are proposed to further improve the use of LES for real gas turbine combustor designs
- …