22,017 research outputs found
On the Outage Probability of the Full-Duplex Interference-Limited Relay Channel
In this paper, we study the performance, in terms of the asymptotic error
probability, of a user which communicates with a destination with the aid of a
full-duplex in-band relay. We consider that the network is
interference-limited, and interfering users are distributed as a Poisson point
process. In this case, the asymptotic error probability is upper bounded by the
outage probability (OP). We investigate the outage behavior for well-known
cooperative schemes, namely, decode-and-forward (DF) and compress-and-forward
(CF) considering fading and path loss. For DF we determine the exact OP and
develop upper bounds which are tight in typical operating conditions. Also, we
find the correlation coefficient between source and relay signals which
minimizes the OP when the density of interferers is small. For CF, the
achievable rates are determined by the spatial correlation of the
interferences, and a straightforward analysis isn't possible. To handle this
issue, we show the rate with correlated noises is at most one bit worse than
with uncorrelated noises, and thus find an upper bound on the performance of
CF. These results are useful to evaluate the performance and to optimize
relaying schemes in the context of full-duplex wireless networks.Comment: 30 pages, 4 figures. Final version. To appear in IEEE JSAC Special
Issue on Full-duplex Wireless Communications and Networks, 201
Cooperative Transmission Protocols with High Spectral Efficiency and High Diversity Order Using Multiuser Detection and Network Coding
Cooperative transmission is an emerging communication technique that takes
advantages of the broadcast nature of wireless channels. However, due to low
spectral efficiency and the requirement of orthogonal channels, its potential
for use in future wireless networks is limited. In this paper, by making use of
multiuser detection (MUD) and network coding, cooperative transmission
protocols with high spectral efficiency, diversity order, and coding gain are
developed. Compared with the traditional cooperative transmission protocols
with single-user detection, in which the diversity gain is only for one source
user, the proposed MUD cooperative transmission protocols have the merits that
the improvement of one user's link can also benefit the other users. In
addition, using MUD at the relay provides an environment in which network
coding can be employed. The coding gain and high diversity order can be
obtained by fully utilizing the link between the relay and the destination.
From the analysis and simulation results, it is seen that the proposed
protocols achieve higher diversity gain, better asymptotic efficiency, and
lower bit error rate, compared to traditional MUD and to existing cooperative
transmission protocols.Comment: to appear, in the proceedings of IEEE International Conference on
Communications, Glasgow, Scotland, 24-28 June 200
A Non-Cooperative Game Theoretical Approach For Power Control In Virtual MIMO Wireless Sensor Network
Power management is one of the vital issue in wireless sensor networks, where
the lifetime of the network relies on battery powered nodes. Transmitting at
high power reduces the lifetime of both the nodes and the network. One
efficient way of power management is to control the power at which the nodes
transmit. In this paper, a virtual multiple input multiple output wireless
sensor network (VMIMO-WSN)communication architecture is considered and the
power control of sensor nodes based on the approach of game theory is
formulated. The use of game theory has proliferated, with a broad range of
applications in wireless sensor networking. Approaches from game theory can be
used to optimize node level as well as network wide performance. The game here
is categorized as an incomplete information game, in which the nodes do not
have complete information about the strategies taken by other nodes. For
virtual multiple input multiple output wireless sensor network architecture
considered, the Nash equilibrium is used to decide the optimal power level at
which a node needs to transmit, to maximize its utility. Outcome shows that the
game theoretic approach considered for VMIMO-WSN architecture achieves the best
utility, by consuming less power.Comment: 12 pages, 8 figure
Cooperative Feedback for Multi-Antenna Cognitive Radio Networks
Cognitive beamforming (CB) is a multi-antenna technique for efficient
spectrum sharing between primary users (PUs) and secondary users (SUs) in a
cognitive radio network. Specifically, a multi-antenna SU transmitter applies
CB to suppress the interference to the PU receivers as well as enhance the
corresponding SU-link performance. In this paper, for a
multiple-input-single-output (MISO) SU channel coexisting with a
single-input-single-output (SISO) PU channel, we propose a new and practical
paradigm for designing CB based on the finite-rate cooperative feedback from
the PU receiver to the SU transmitter. Specifically, the PU receiver
communicates to the SU transmitter the quantized SU-to-PU channel direction
information (CDI) for computing the SU transmit beamformer, and the
interference power control (IPC) signal that regulates the SU transmission
power according to the tolerable interference margin at the PU receiver. Two CB
algorithms based on cooperative feedback are proposed: one restricts the SU
transmit beamformer to be orthogonal to the quantized SU-to-PU channel
direction and the other relaxes such a constraint. In addition, cooperative
feedforward of the SU CDI from the SU transmitter to the PU receiver is
exploited to allow more efficient cooperative feedback. The outage
probabilities of the SU link for different CB and cooperative
feedback/feedforward algorithms are analyzed, from which the optimal
bit-allocation tradeoff between the CDI and IPC feedback is characterized.Comment: 26 pages; to appear in IEEE Trans. Signal Processin
Wireless industrial monitoring and control networks: the journey so far and the road ahead
While traditional wired communication technologies have played a crucial role in industrial monitoring and control networks over the past few decades, they are increasingly proving to be inadequate to meet the highly dynamic and stringent demands of today’s industrial applications, primarily due to the very rigid nature of wired infrastructures. Wireless technology, however, through its increased pervasiveness, has the potential to revolutionize the industry, not only by mitigating the problems faced by wired solutions, but also by introducing a completely new class of applications. While present day wireless technologies made some preliminary inroads in the monitoring domain, they still have severe limitations especially when real-time, reliable distributed control operations are concerned. This article provides the reader with an overview of existing wireless technologies commonly used in the monitoring and control industry. It highlights the pros and cons of each technology and assesses the degree to which each technology is able to meet the stringent demands of industrial monitoring and control networks. Additionally, it summarizes mechanisms proposed by academia, especially serving critical applications by addressing the real-time and reliability requirements of industrial process automation. The article also describes certain key research problems from the physical layer communication for sensor networks and the wireless networking perspective that have yet to be addressed to allow the successful use of wireless technologies in industrial monitoring and control networks
Multi-Antenna Assisted Virtual Full-Duplex Relaying with Reliability-Aware Iterative Decoding
In this paper, a multi-antenna assisted virtual full-duplex (FD) relaying
with reliability-aware iterative decoding at destination node is proposed to
improve system spectral efficiency and reliability. This scheme enables two
half-duplex relay nodes, mimicked as FD relaying, to alternatively serve as
transmitter and receiver to relay their decoded data signals regardless the
decoding errors, meanwhile, cancel the inter-relay interference with
QR-decomposition. Then, by deploying the reliability-aware iterative
detection/decoding process, destination node can efficiently mitigate
inter-frame interference and error propagation effect at the same time.
Simulation results show that, without extra cost of time delay and signalling
overhead, our proposed scheme outperforms the conventional selective
decode-and-forward (S-DF) relaying schemes, such as cyclic redundancy check
based S-DF relaying and threshold based S-DF relaying, by up to 8 dB in terms
of bit-error-rate.Comment: 6 pages, 4 figures, conference paper has been submitte
- …