An Emulator Toolbox to Approximate Radiative Transfer Models with Statistical Learning

Physically-based radiative transfer models (RTMs) help in understanding the processes occurring on the Earth’s surface and their interactions with vegetation and atmosphere. When it comes to studying vegetation properties, RTMs allows us to study light interception by plant canopies and are used in the retrieval of biophysical variables through model inversion. However, advanced RTMs can take a long computational time, which makes them unfeasible in many real applications. To overcome this problem, it has been proposed to substitute RTMs through so-called emulators. Emulators are statistical models that approximate the functioning of RTMs. Emulators are advantageous in real practice because of the computational efficiency and excellent accuracy and flexibility for extrapolation. We hereby present an “Emulator toolbox” that enables analysing multi-output machine learning regression algorithms (MO-MLRAs) on their ability to approximate an RTM. The toolbox is included in the free-access ARTMO’s MATLAB suite for parameter retrieval and model inversion and currently contains both linear and non-linear MO-MLRAs, namely partial least squares regression (PLSR), kernel ridge regression (KRR) and neural networks (NN). These MO-MLRAs have been evaluated on their precision and speed to approximate the soil vegetation atmosphere transfer model SCOPE (Soil Canopy Observation, Photochemistry and Energy balance). SCOPE generates, amongst others, sun-induced chlorophyll fluorescence as the output signal. KRR and NN were evaluated as capable of reconstructing fluorescence spectra with great precision. Relative errors fell below 0.5% when trained with 500 or more samples using cross-validation and principal component analysis to alleviate the underdetermination problem. Moreover, NN reconstructed fluorescence spectra about 50-times faster and KRR about 800-times faster than SCOPE. The Emulator toolbox is foreseen to open new opportunities in the use of advanced RTMs, in which both consistent physical assumptions and data-driven machine learning algorithms live together

Unlocking the benefits of spaceborne imaging spectroscopy for sustainable agriculture

With the Environmental Mapping and Analysis Program (EnMAP) mission, launched on April 1st 2022, new opportunities unfold for precision farming and agricultural monitoring. The recurring acquisition of spectrometric imagery from space, contiguously resolving the electromagnetic spectrum in the optical domain (400—2500 nm) within close narrow bands, provides unprecedented data about the interaction of radiation with biophysical and biochemical crop constituents. These interactions manifest in spectral reflectance, carrying important information about crop status and health. This information may be incorporated in agricultural management systems to support necessary efforts to maximize yields against the backdrop of an increased food demand by a growing world population. At the same time, it enables the effective optimization of fertilization and pest control to minimize environmental impacts of agriculture. Deriving biophysical and biochemical crop traits from hyperspectral reflectance thereby always relies on a model. These models are categorized into (1) parametric, (2) nonparametric, (3) physically-based, and (4) hybrid retrieval schemes. Parametric methods define an explicit parameterized expression, relating a number of spectral bands or derivates thereof with a crop trait of interest. Nonparametric methods comprise linear techniques, such as principal component analysis (PCA) which addresses collinearity issues between adjacent bands and enables compression of full spectral information into dimensionality reduced, maximal informative principal components (PCs). Nonparametric nonlinear methods, i.e., machine learning (ML) algorithms apply nonlinear transformations to imaging spectroscopy data and are therefore capable of capturing nonlinear relationships within the contained spectral features. Physically-based methods represent an umbrella term for radiative transfer models (RTMs) and related retrieval schemes, such as look-up-table (LUT) inversion. A simple, easily invertible and specific RTM is the Beer-Lambert law which may be used to directly infer plant water content. The most widely used general and invertible RTM is the one-dimensional canopy RTM PROSAIL, which is coupling the Leaf Optical Properties Spectra model PROSPECT and the canopy reflectance model 4SAIL: Scattering by Arbitrarily Inclined Leaves. Hybrid methods make use of synthetic data sets created by RTMs to calibrate parametric methods or to train nonparametric ML algorithms. Due to the ill-posed nature of RTM inversion, potentially unrealistic and redundant samples in a LUT need to be removed by either implementing physiological constraints or by applying active learning (AL) heuristics. This cumulative thesis presents three different hybrid approaches, demonstrated within three scientific research papers, to derive agricultural relevant crop traits from spectrometric imagery. In paper I the Beer-Lambert law is applied to directly infer the thickness of the optically active water layer (i.e., EWT) from the liquid water absorption feature at 970 nm. The model is calibrated with 50,000 PROSPECT spectra and validated over in situ data. Due to separate water content measurements of leaves, stalks, and fruits during the Munich-North-Isar (MNI) campaigns, findings indicate that depending on the crop type and its structure, different parts of the canopy are observed with optical sensors. For winter wheat, correlation between measured and modelled water content was most promising for ears and leaves, reaching coefficients of determination (R2) up to 0.72 and relative RMSE (rRMSE) of 26%, and in the case of corn for the leaf fraction only (R2 = 0.86, rRMSE = 23%). These results led to the general recommendation to collect destructive area-based plant organ specific EWT measurements instead of the common practice to upscale leaf-based EWT measurements to canopy water content (CWC) by multiplication of the leaf area index (LAI). The developed and calibrated plant water retrieval (PWR) model proved to be transferable in space and time and is ready to be applied to upcoming EnMAP data and any other hyperspectral imagery. In paper II the parametric concept of spectral integral ratios (SIR) is introduced to retrieve leaf chlorophyll a and b content (Cab), leaf carotenoid content (Ccx) and leaf water content (Cw) simultaneously from imaging spectroscopy data in the wavelength range 460—1100 nm. The SIR concept is based on automatic separation of respective absorption features through local peak and intercept analysis between log-transformed reflectance and convex hulls. The approach was validated over a physiologically constrained PROSAIL simulated database, considering natural Ccx-Cab relations and green peak locations. Validation on airborne spectrometric HyMAP data achieved satisfactory results for Cab (R2 = 0.84; RMSE = 9.06 µg cm-2) and CWC (R2 = 0.70; RMSE = 0.05 cm). Retrieved Ccx values were reasonable according to Cab-Ccx-dependence plausibility analysis. Mapping of the SIR results as multiband images (3-segment SIR) allows for an intuitive visualization of dominant absorptions with respect to the three considered biochemical variables. Hence, the presented SIR algorithm allows for computationally efficient and RTM supported robust retrievals of the two most important vegetation pigments as well as of water content and is applicable on satellite imaging spectroscopy data. In paper III a hybrid workflow is presented, combining RTM with ML for inferring crop carbon content (Carea) and aboveground dry and fresh biomass (AGBdry, AGBfresh). The concept involves the establishment of a PROSAIL training database, dimensionality reduction using PCA, optimization in the sampling domain using AL against the 4-year MNI campaign dataset, and training of Gaussian process regression (GPR) ML algorithms. Internal validation of the GPR-Carea and GPR-AGB models achieved R2 of 0.80 for Carea, and R2 of 0.80 and 0.71 for AGBdry and AGBfresh, respectively. Validation with an independent dataset, comprising airborne AVIRIS NG imagery (spectrally resampled to EnMAP) and in situ measurements, successfully demonstrated mapping capabilities for both bare and green fields and generated reliable estimates over winter wheat fields at low associated model uncertainties (< 40%). Overall, the proposed carbon and biomass models demonstrate a promising path toward the inference of these crucial variables over cultivated areas from upcoming spaceborne hyperspectral acquisitions, such as from EnMAP. As conclusions, the following important findings arise regarding parametric and nonparametric hybrid methods as well as in view of the importance of in situ data collection. (1) Uncertainties within the RTM PROSAIL should always be considered. A possible reduction of these uncertainties is thereby opposed to the invertibility of the model and its intended simplicity. (2) Both physiological constraints and AL heuristics should be applied to reduce unrealistic parameter combinations in a PROSAIL calibration or training database. (3) State-of-the-art hybrid ML approaches with the ability to provide uncertainty intervals are anticipated as most promising approach for solving inference problems from hyperspectral Earth observation data due to their synergistic use of RTMs and the high flexibility, accuracy and consistency of nonlinear nonparametric methods. (4) Parametric hybrid approaches, due to their algorithmic transparency, enable deeper insights into fundamental physical limitations of optical remote sensing as compared to ML approaches. (5) Integration-based indices that make full use of available hyperspectral information may serve as physics-aware dimensionality reduced input for ML algorithms to either improve estimations or to serve as endmember for crop type discrimination when additional time series information is available. (6) The validation of quantitative model-based estimations is crucial to evaluate and improve their performance in terms of the underlying assumptions, model parameterizations, and input data. (7) In the face of soon-to-be-available EnMAP data, collection of in situ data for validation of retrieval methods should aim at high variability of measured crop types, high temporal variability over the whole growing season, as well as include area- and biomass-based destructive measurements instead of LAI-upscaled leaf measurements. Provided the perfect functionality of the payload instruments, the success of the EnMAP mission and the here presented methods depend critically on a low-noise, accurate atmospherically corrected reflectance product. High-level outputs of the retrieval methods presented in this thesis may be incorporated into agricultural decision support systems for fertilization and irrigation planning, yield estimation, or estimation of the soil carbon sequestration potential to enable a sustainable intensive agriculture in the future.Mit der am 1. April 2022 gestarteten Satellitenmission Environmental Mapping and Analysis Program (EnMAP) eröffnen sich neue Möglichkeiten für die Präzisionslandwirtschaft und das landwirtschaftliche Monitoring. Die wiederkehrende Erfassung spektrometrischer Bilder aus dem Weltraum, welche das elektromagnetische Spektrum im optischen Bereich (400—2500 nm) innerhalb von engen, schmalen Bändern zusammenhängend auflösen, liefert nie dagewesene Daten über die Interaktionen von Strahlung und biophysikalischen und biochemischen Pflanzenbestandteilen. Diese Wechselwirkungen manifestieren sich in der spektralen Reflektanz, die wichtige Informationen über den Zustand und die Gesundheit der Pflanzen enthält. Vor dem Hintergrund einer steigenden Nachfrage nach Nahrungsmitteln durch eine wachsende Weltbevölkerung können diese Informationen in landwirtschaftliche Managementsysteme einfließen, um eine notwendige Ertragsmaximierung zu unterstützen. Gleichzeitig können sie eine effiziente Optimierung der Düngung und Schädlingsbekämpfung ermöglichen, um die Umweltauswirkungen der Landwirtschaft zu minimieren. Die Ableitung biophysikalischer und biochemischer Pflanzeneigenschaften aus hyperspektralen Reflektanzdaten ist dabei immer von einem Modell abhängig. Diese Modelle werden in (1) parametrische, (2) nichtparametrische, (3) physikalisch basierte und (4) hybride Ableitungsmethoden kategorisiert. Parametrische Methoden definieren einen expliziten parametrisierten Ausdruck, der eine Reihe von Spektralkanälen oder deren Ableitungen mit einem Pflanzenmerkmal von Interesse in Beziehung setzt. Nichtparametrische Methoden umfassen lineare Techniken wie die Hauptkomponentenanalyse (PCA). Diese adressieren Kollinearitätsprobleme zwischen benachbarten Kanälen und komprimieren die gesamte Spektralinformation in dimensionsreduzierte, maximal informative Hauptkomponenten (PCs). Nichtparametrische nichtlineare Methoden, d. h. Algorithmen des maschinellen Lernens (ML), wenden nichtlineare Transformationen auf bildgebende Spektroskopiedaten an und sind daher in der Lage, nichtlineare Beziehungen innerhalb der enthaltenen spektralen Merkmale zu erfassen. Physikalisch basierte Methoden sind ein Oberbegriff für Strahlungstransfermodelle (RTM) und damit verbundene Ableitungsschemata, d. h. Invertierungsverfahren wie z. B. die Invertierung mittels Look-up-Table (LUT). Ein einfaches, leicht invertierbares und spezifisches RTM stellt das Lambert-Beer'sche Gesetz dar, das zur direkten Ableitung des Wassergehalts von Pflanzen verwendet werden kann. Das am weitesten verbreitete, allgemeine und invertierbare RTM ist das eindimensionale Bestandsmodell PROSAIL, eine Kopplung des Blattmodells Leaf Optical Properties Spectra (PROSPECT) mit dem Bestandsreflexionsmodell 4SAIL (Scattering by Arbitrarily Inclined Leaves). Bei hybriden Methoden werden von RTMs generierte, synthetische Datenbanken entweder zur Kalibrierung parametrischer Methoden oder zum Training nichtparametrischer ML-Algorithmen verwendet. Aufgrund der Äquifinalitätsproblematik bei der RTM-Invertierung, müssen potenziell unrealistische und redundante Simulationen in einer solchen Datenbank durch die Implementierung natürlicher physiologischer Beschränkungen oder durch die Anwendung von Active Learning (AL) Heuristiken entfernt werden. In dieser kumulativen Dissertation werden drei verschiedene hybride Ansätze zur Ableitung landwirtschaftlich relevanter Pflanzenmerkmale aus spektrometrischen Bilddaten vorgestellt, die anhand von drei wissenschaftlichen Publikationen demonstriert werden. In Paper I wird das Lambert-Beer'sche Gesetz angewandt, um die Dicke der optisch aktiven Wasserschicht (bzw. EWT) direkt aus dem Absorptionsmerkmal von flüssigem Wasser bei 970 nm abzuleiten. Das Modell wird mit 50.000 PROSPECT-Spektren kalibriert und anhand von In-situ-Daten validiert. Aufgrund separater Messungen des Wassergehalts von Blättern, Stängeln und Früchten während der München-Nord-Isar (MNI)-Kampagnen, zeigen die Ergebnisse, dass je nach Kulturart und -struktur, unterschiedliche Teile des Bestandes mit optischen Sensoren beobachtet werden können. Bei Winterweizen wurde die höchste Korrelation zwischen gemessenem und modelliertem Wassergehalt für Ähren und Blätter erzielt und sie erreichte Bestimmtheitsmaße (R2) von bis zu 0,72 bei einem relativen RMSE (rRMSE) von 26%, bei Mais entsprechend nur für die Blattfraktion (R2 = 0,86, rRMSE = 23%). Diese Ergebnisse führten zu der allgemeinen Empfehlung, Kompartiment-spezifische EWT-Bestandsmessungen zu erheben, anstatt der üblichen Praxis, blattbasierte EWT-Messungen durch Multiplikation mit dem Blattflächenindex (LAI) auf den Bestandswassergehalt (CWC) hochzurechnen. Das entwickelte und kalibrierte Modell zur Ableitung des Pflanzenwassergehalts (PWR) erwies sich als räumlich und zeitlich übertragbar und kann auf bald verfügbare EnMAP-Daten und andere hyperspektrale Bilddaten angewendet werden. In Paper II wird das parametrische Konzept der spektralen Integralratios (SIR) eingeführt, um den Chlorophyll a- und b-Gehalt (Cab), den Karotinoidgehalt (Ccx) und den Wassergehalt (Cw) simultan aus bildgebenden Spektroskopiedaten im Wellenlängenbereich 460-1100 nm zu ermitteln. Das SIR-Konzept basiert auf der automatischen Separierung der jeweiligen Absorptionsmerkmale durch lokale Maxima- und Schnittpunkt-Analyse zwischen log-transformierter Reflektanz und konvexen Hüllen. Der Ansatz wurde anhand einer physiologisch eingeschränkten PROSAIL-Datenbank unter Berücksichtigung natürlicher Ccx-Cab-Beziehungen und Positionen der Maxima im grünen Wellenlängenbereich validiert. Die Validierung mit flugzeuggestützten spektrometrischen HyMAP-Daten ergab zufriedenstellende Ergebnisse für Cab (R2 = 0,84; RMSE = 9,06 µg cm-2) und CWC (R2 = 0,70; RMSE = 0,05 cm). Die ermittelten Ccx-Werte wurden anhand einer Plausibilitätsanalyse entsprechend der Cab-Ccx-Abhängigkeit als sinnvoll bewertet. Die Darstellung der SIR-Ergebnisse als mehrkanalige Bilder (3 segment SIR) ermöglicht zudem eine auf die drei betrachteten biochemischen Variablen bezogene, intuitive Visualisierung der dominanten Absorptionen. Der vorgestellte SIR-Algorithmus ermöglicht somit wenig rechenintensive und RTM-gestützte robuste Ableitungen der beiden wichtigsten Pigmente sowie des Wassergehalts und kann in auf jegliche zukünftig verfügbare Hyperspektraldaten angewendet werden. In Paper III wird ein hybrider Ansatz vorgestellt, der RTM mit ML kombiniert, um den Kohlenstoffgehalt (Carea) sowie die oberirdische trockene und frische Biomasse (AGBdry, AGBfresh) abzuschätzen. Das Konzept umfasst die Erstellung einer PROSAIL-Trainingsdatenbank, die Dimensionsreduzierung mittels PCA, die Reduzierung der Stichprobenanzahl mittels AL anhand des vier Jahre umspannenden MNI-Kampagnendatensatzes und das Training von Gaussian Process Regression (GPR) ML-Algorithmen. Die interne Validierung der GPR-Carea und GPR-AGB-Modelle ergab einen R2 von 0,80 für Carea und einen R2 von 0,80 bzw. 0,71 für AGBdry und AGBfresh. Die Validierung auf einem unabhängigen Datensatz, der flugzeuggestützte AVIRIS-NG-Bilder (spektral auf EnMAP umgerechnet) und In-situ-Messungen umfasste, zeigte erfolgreich die Kartierungsfähigkeiten sowohl für offene Böden als auch für grüne Felder und führte zu zuverlässigen Schätzungen auf Winterweizenfeldern bei geringen Modellunsicherheiten (< 40%). Insgesamt zeigen die vorgeschlagenen Kohlenstoff- und Biomassemodelle einen vielversprechenden Ansatz auf, der zur Ableitung dieser wichtigen Variablen über Anbauflächen aus künftigen weltraumgestützten Hyperspektralaufnahmen wie jenen von EnMAP genutzt werden kann. Als Schlussfolgerungen ergeben sich die folgenden wichtigen Erkenntnisse in Bezug auf parametrische und nichtparametrische Hybridmethoden sowie bezogen auf die Bedeutung der In-situ-Datenerfassung. (1) Unsicherheiten innerhalb des RTM PROSAIL sollten immer berücksichtigt werden. Eine mögliche Verringerung dieser Unsicherheiten steht dabei der Invertierbarkeit des Modells und dessen beabsichtigter Einfachheit entgegen. (2) Sowohl physiologische Einschränkungen als auch AL-Heuristiken sollten angewendet werden, um unrealistische Parameterkombinationen in einer PROSAIL-Kalibrierungs- oder Trainingsdatenbank zu reduzieren. (3) Modernste ML-Ansätze mit der Fähigkeit, Unsicherheitsintervalle bereitzustellen, werden als vielversprechendster Ansatz für die Lösung von Inferenzproblemen aus hyperspektralen Erdbeobachtungsdaten aufgrund ihrer synergetischen Nutzung von RTMs und der hohen Flexibilität, Genauigkeit und Konsistenz nichtlinearer nichtparametrischer Methoden angesehen. (4) Parametrische hybride Ansätze ermöglichen aufgrund ihrer algorithmischen Transparenz im Vergleich zu ML-Ansätzen tiefere Einblicke in die grundlegenden physikalischen Grenzen der optischen Fernerkundung. (5) Integralbasierte Indizes, die die verfügbare hyperspektrale Information voll ausschöpfen, können als physikalisch-basierte dimensionsreduzierte Inputs für ML-Algorithmen dienen, um entweder Schätzungen zu verbessern oder um als Eingangsdaten die verbesserte Unterscheidung von Kulturpflanzen zu ermöglichen, sobald zusätzliche Zeitreiheninformationen verfügbar sind. (6) Die Validierung quantitativer modellbasierter Schätzungen ist von entscheidender Bedeutung für die Bewertung und Verbesserung ihrer Leistungsfähigkeit in Bezug auf die zugrunde liegenden Annahmen, Modellparametrisierungen und Eingabedaten. (7) Angesichts der bald verfügbaren EnMAP-Daten sollte die Erhebung von In-situ-Daten zur Validierung von Ableitungsmethoden auf eine hohe Variabilität der gemessenen Pflanzentypen und eine hohe zeitliche Variabilität über die gesamte Vegetationsperiode abzielen sowie flächen- und biomassebasierte destruktive Messungen anstelle von LAI-skalierten Blattmessungen umfassen. Unter der Voraussetzung, dass die Messinstrumente perfekt funktionieren, hängt der Erfolg der EnMAP-Mission und der hier vorgestellten Methoden entscheidend von einem rauscharmen, präzise atmosphärisch korrigierten Reflektanzprodukt ab. Die Ergebnisse der in dieser Arbeit vorgestellten Methoden können in landwirtschaftliche Entscheidungsunterstützungssysteme für die Dünge- oder Bewässerungsplanung, die Ertragsabschätzung oder die Schätzung des Potenzials der Kohlenstoffbindung im Boden integriert werden, um eine nachhaltige Intensivlandwirtschaft in der Zukunft zu ermöglichen

Retrieval of maize leaf area index using hyperspectral and multispectral data

Field spectra acquired from a handheld spectroradiometer and Sentinel-2 images spectra were used to investigate the applicability of hyperspectral and multispectral data in retrieving the maize leaf area index in low-input crop systems, with high spatial and intra-annual variability, and low yield, in southern Mozambique, during three years. Seventeen vegetation indices, comprising two and three band indices, and nine machine learning regression algorithms (MLRA) were tested for the statistical approach while five cost functions were tested in the look-up-table (LUT) inversion approach. The three band vegetation indices were selected, specifically the modified difference index (mDId: 725; 715; 565) for the hyperspectral dataset and the modified simple ratio (mSRc: 740; 705; 865) for the multispectral dataset of field spectra and the three band spectral index (TBSIb: 665; 865; 783) for the Sentinel-2 dataset. The relevant vector machine was the selected MLRA for the two datasets of field spectra (multispectral and hyperspectral) while the support vector machine was selected for the Sentinel-2 data. When using the LUT inversion technique, the minimum contrast estimation and the Bhattacharyya divergence cost functions were the best performing. The vegetation indices outperformed the other two approaches, with the TBSIb as the most accurate index (RMSE = 0.35). At the field scale, spectral data from Sentinel-2 can accurately retrieve the maize leaf area index in the study areainfo:eu-repo/semantics/publishedVersio

Retrieval of evapotranspiration from sentinel-2: Comparison of vegetation indices, semi-empirical models and SNAP biophysical processor approach

Remote sensing evapotranspiration estimation over agricultural areas is increasingly used for irrigation management during the crop growing cycle. Different methodologies based on remote sensing have emerged for the leaf area index (LAI) and the canopy chlorophyll content (CCC) estimation, essential biophysical parameters for crop evapotranspiration monitoring. Using Sentinel-2 (S2) spectral information, this studyperformeda comparative analysis of empirical (vegetation indices), semi-empirical (CLAIR model with fixed and calibrated extinction coefficient) and artificial neural network S2 products derived from the Sentinel Application Platform Software (SNAP) biophysical processor (ANN S2 products) approaches for the estimation of LAI and CCC. Four independent in situ collected datasets of LAI and CCC, obtained with standard instruments (LAI-2000, SPAD) and a smartphone application (PocketLAI), were used. The ANN S2 products present good statistics for LAI (R2 > 0.70, root mean square error (RMSE) 0.75, RMSE < 0.68 g/m2) retrievals. The normalized Sentinel-2 LAI index (SeLI) is the index that presents good statistics in each dataset (R2 > 0.71, RMSE < 0.78) and for the CCC, the ratio red-edge chlorophyll index (CIred-edge) (R2 > 0.67, RMSE < 0.62 g/m2). Both indices use bands located in the red-edge zone, highlighting the importance of this region. The LAI CLAIR model with a fixed extinction coefficient value produces a R2 > 0.63 and a RMSE < 1.47 and calibrating this coefficient for each study area only improves the statistics in two areas (RMSE 0.70). Finally, this study analyzed the influence of the LAI parameter estimated with the different methodologies in the calculation of crop potential evapotranspiration (ETc) with the adapted Penman–Monteith (FAO-56 PM), using a multi-temporal dataset. The results were compared with ETc estimated as the product of the reference evapotranspiration (ETo) and on the crop coefficient (Kc) derived fromFAO table values. In the absence of independent reference ET data, the estimated ETc with the LAI in situ values were considered as the proxy of the ground-truth. ETc estimated with the ANN S2 LAI product is the closest to the ETc values calculated with the LAI in situ (R2 > 0.90, RMSE < 0.41 mm/d). Our findings indicate the good validation of ANN S2 LAI and CCC products and their further suitability for the implementation in evapotranspiration retrieval of agricultural areas

Retrieval of biophysical parameters from multi-sensoral remote sensing data, assimilated into the crop growth model CERES-Wheat

This study investigated the possibilities and constraints for an integrated use of a crop growth model (CERES-Wheat) and earth observation techniques. The assimilation of information derived from earth observation sensors into crop growth models enables regional applications and may also help to improve the profound knowledge of the different involved processes and interactions. Both techniques can contribute to improved use of resources, reduced crop production risks, minimised environmental degradation, and increased farm income. Up to now, crop growth modelling and remote sensing techniquices mostly have been used separately for the assessment of agricultural applications. Crop growth models have made valuable contributions to, e.g., yield forecasting or to management decision support systems. Likewise, remote sensing techniques were successfully utilized in classification of agricultural areas or in the quantification of vegetation characteristics at various spatial and temporal scales. Multisensoral remote sensing approaches for the quantification biophysical variables are rarely realized. Normally the fusion of the data sources is based on the use of one sensor for classification purposes and the other one for the extraction of the desired parameters, based on the map classified previously. Pixel-based fusions between multispectral and SAR data is seldom realised for the assessment of quantitative parameters. The integration of crop growth models and remote sensing techniques by assimilating remotely sensed parameters into the models, is also still an issue of research. Especially, the integration of, e.g., multi-sensor biophysical parameter time-series for the improvement of the model performance, might feature a high potential. The starting point of the presented study was the question, if it is possible to derive the values of important crop variables from various remote sensing data? For the retrieval of these quantitative parameters by the use of various multispectral remote sensing sensors, intercalibration issues between the different retrieved vegetation indices had to be taken into account, in order to assure the comparability. Features influencing the vegetation indices are, e.g., the sensor geometry (like viewing- and solar-angle), atmospherical conditions, topography and spatial or radiometric resolution. However, the factors taken into account within this study are the spectral characteristics of the different sensors, like band position, bandwidth and centre wavelengths, which are described by the relative spectral response functions. Due to different RSR functions of the sensor bands, measured spectral differences occur, because the sensors record different components of the reflectance’s spectra from the monitored targets. These are then also introduced into the derived vegetation indices. The chosen cross-calibration method, intercalibrated the assessed Normalized Difference Vegetation Index and the Weighted Difference Vegetation Index between the various sensor pairs by regression, based on simulated multispectral sensors. Differences between the various assessed remote sensing sensors decreased form around 7% to below 1%. The intercalibration also had a positive impact on the later biophysical retrieval performance, producing sounder retrieval results. For the retrieval of the biophysical parameters empirical and semi-empirical models were assessed. The results indicate that the semi-empirical CLAIR model outperforms the empirical approaches. Not only for the Leaf Area Index retrieval, but also in the cases of all other assessed parameters. Concerning the other remote sensing data type used, the SAR data, it was analysed what potential different polarizations and incidence angles have for the extraction of the quantitative parameters. It became obvious that especially high incidence angles, as provided by the satellite Envisat ASAR, produce sounder retrieval results than lower incidence angles, due to a smaller amount of received soil signal. In the context of the assessed polarizations, sound results for the VV polarization could only be achieved for the retrieval of fresh biomass and the plant water content. For the ASAR sensor modelling fresh biomass and LAI using the HV polarization or the dry biomass using the ratio (HH/HV) was appropriate. As roughness aspects also have an influence on the retrieval performance from biophysical parameters using SAR data, the impact of soil surface and vegetation roughness was additionally considered. Best results were achieved, when also considering roughness features, however due to the need of regional modelling it is more appropriate not to consider them. For the calibration and re-tuning of crop growth models information about important phenological events such as heading/flowering is rather important. After this stage reproductive growth begins, whereby the number of kernels per plant is often calculated from plant weight at flowering and kernel weight is calculated from time and temperature available for dry matter distribution. By the use of the SAR VV time-series this important stage could be successfully extracted. Further methods for pixel-based fused biophysical parameter estimations, using SAR and multispectral data were analysed. By this approach the different features, being monitored of the two systems, are combined for sounder parameter retrieval. The assessed method of combining the multi-sensoral information by linear regression did not bring sound results and was outperformed by single sensor use, only taking into account the multispectral information. Only for the parameter fresh biomass, modelling based on the NDIV and the ASAR ratio slightly outperformed the single sensor modelling approaches. The complex combined modelling by the use of the CLAIR and the Water Cloud Model featured no valid results. For the combination, by using the CLAIR model and multiple regression slight improvements, in contrast to the single multispectral sensor use, were achieved. Especially, during late phenological stages, the assessed VV information improved the modelling results, in comparison to only using the CLAIR model. All the findings could finally be successfully applied for regional estimations. Only the roughness features could not be applied, due to the fact, that it is hard to regionally assess this needed model input parameter. Regional parameter on the basis of remote sensing data, is the major advantage of this technique, due to the large spatial overview given. The second main question was, if it is possible to integrate the crop variables gained from multisensoral data into a crop growth model, increasing the final yield estimation accuracy. Thus far, beneficial linkages between both techniques have been often limited to land use classification via remote sensing for choosing the adequate model and quantification of crop growth and development curves using biophysical parameters derived from remote sensing images for model calibration. Only a few studies actually considered the potentials of remote sensing for model re-initialization of growth and development characteristics of a specific crop, as the here studied winter wheat. Overall, the integration of remotely sensed variables into the crop growth model CERES-Wheat led to an improved final yield estimation accuracy in comparison to an automatic input parameter setting. The assessed final yield bias for the automatic input parameter setting summed up to 6.6%. When re-initializing the most sensitive input parameters (sowing date and fertilizer application date) by the use of remotely sensed biophysical variables the biases ranged from 0.56% overestimation to 5.4% understimation, in dependence of the data series used for assimilation. Whereby, it was assessed that the combined dense data series, considering SAR and multispectral information, slightly outperformed the performance of the full multispectral data series. However, when analysing the assimilation of the multispectral data series in further detail, it became clear that the actually information from the phenological stage ripening declines the modelling performance and thus the final yield estimation accuracy. When neglecting the information from this phenological stage the reduced multispectral data series performed as sound as the dense data series containing SAR and multispectral information. Thus, when the appropriate phenological stages are monitored by multispectral data, additional SAR information does not lead to a model improvement. However, when important dates are not monitored by multispectral images, e.g., due to cloud coverage, the additionally considered SAR information was not able to appropriatly fill these important multispectral time gaps. They even had a more negeative influence on the modelling performance. Overall, the best results could be obtained by assimilating a multispectral data series, covering the crop development during the important phenological stages stem elongation and flowering (without ripening stage), into the CERES-Wheat model. Finally, the integration of remote sensing data in the point-based crop growth model allowed it‘s spatial application for prediction of wheat production at a more regional scale. This approach also outperformed another evaluated method of direct multi-sensoral regional yield estimation. This study has demonstrated that biophysical parameters can be retrieved from remote sensing data and led, when assimilated into a crop growth model, to an improved final yield estimation. However, overall the SAR information did not really have a significant positive effect on the multi-sensoral biophysical parameter retrieval and on the later assimilation process. Thus, overall SAR information should only be considered, when multispectral data acquisitions are tremendously hampered by cloud coverage. The assessed assimilation of remote sensing information into a crop growth model had a positive effect on the final yield estimation performance. The analysed method, combining remote sensing and crop growth model techniques, was succsessfully demonstrated and will gain even more importance in the future for, e.g., decision support systems fine-tuning fertilizer regimes and thus contributing to more environmentally sound and sustained agricultural production

The EnMAP Managed Vegetation Scientific Processor

Nach jahrelanger wissenschaftlicher und technischer Vorbereitungszeit wird voraussichtlich Ende des Jahres 2020 der Start der orbitalen Phase einer unbemannten deutschen Weltraum-Mission initiiert. Das Environmental Mapping and Analysis Program (EnMAP) wird an Bord des gleichnamigen Satelliten einen hyperspektralen Sensor zur Erfassung terrestrischer Oberflächen tragen. In den Umweltdisziplinen zur Erforschung von Ökosystemen, landwirtschaftlicher, forstwirtschaftlicher und urbaner Flächen, im Bereich der Küsten- und Inlandsgewässer sowie der Geologie und Bodenkunde bereitete man sich im Vorfeld des Starts auf die kommenden Daten vor. Zwar existiert bereits eine Vielzahl an Algorithmen zur wissenschaftlichen Analyse von spektralen Daten, allerdings ergeben sich auch neue Herausforderungen, da die EnMAP-Mission bislang im weltweiten Kontext der Fernerkundung einzigartig ist. Die Abdeckung des vollen optischen Spektrums (420 nm – 2450 nm) in Verbindung mit einer moderaten räumlichen Auflösung von 30 m und einem hohen Signal-Rausch-Verhältnis von mindestens 180 im kurzwelligen Infrarot und über 400 im sichtbaren Spektrum, ermöglichen eine Aufnahmequalität, die bislang nur von flugzeuggestützten Systemen erreicht werden konnte. Die Bemühungen in dieser Dissertation umfassen Aktivitäten in der wissenschaftlichen Vorbereitungsphase zu agrargeographischen Fragestellungen. Algorithmen und Tools zur Analyse der hyperspektralen Daten werden kostenlos im QGIS-Plugin EnMAP-Box 3 zur Verfügung gestellt. Die drängenden Fragen im Agrarsektor drehen sich hierbei um die Ableitung biochemischer und biophysikalischer Parameter aus Fernerkundungsdaten, weshalb die übergeordnete Problemstellung des Promotionsvorhabens die Entwicklung eines wissenschaftsbasierten EnMAP-Tools für bewirtschaftete Vegetationsflächen (EnMAP Managed Vegetation Scientific Processor) darstellt. Zu Beginn wurde eine umfassende Feldkampagne geplant, welche ab April 2014 umgesetzt wurde. Neben der spektralen Erfassung von Blatt-, Bestands- und Bodensignaturen in einem Winterweizen- und einem Maisfeld erfolgte auch die Messung wesentlicher Pflanzenparameter an den exakt gleichen Positionen. Hierzu zählt die non-destruktive Ableitung des Blattflächenindex (LAI), des Blattchlorophyllgehalts (Ccab), des Blattwassergehalts (EWT oder Cw), des relativen Blatttrockengewichts (LMA oder Cm), des mittleren Blattneigungswinkels im Bestand (ALIA) sowie weiterer sekundärer Parameter wie Wuchshöhe, das phänologisches Stadium und der Sonnenvektor. Um die Fähigkeit des späteren EnMAP-Satelliten sich um bis zu 30° orthogonal zur Flugrichtung zu kippen nachzustellen, wurden die spektralen Aufnahmen aus verschiedenen Betrachtungswinkeln erstellt, die dieser Aufnahme-Geometrien nachempfunden sind. Ein gängiges Verfahren zur Ableitung der relevanten Pflanzenparameter ist die Verwendung des Strahlungstransfermodells PROSAIL, welches das spektrale Signal einer Vegetationsfläche auf Basis der zugrundeliegenden biophysikalischen und biochemischen Parameter simuliert. Bei der Umkehr dieses Prozesses können ebendiese Variablen von gemessenen spektralen Daten abgeleitet werden. Hierzu wurde eine Datenbank (Look-Up-Table, LUT) aus PROSAIL-Modellläufen aufgebaut und die in den Feldkampagnen gemessenen Spektren mit dieser abgeglichen. Mit dieser Methode der LUT-Invertierung aus unterschiedlichen Aufnahmewinkeln konnten Genauigkeiten bei der LAI-Schätzung von 18 % und bei Blattchlorophyll von 20 % erzielt werden. Eine starke Anisotropie, also eine Reflexionsabhängigkeit von der Beleuchtungs- und Aufnahmerichtung, wurde bei Winterweizen vor allem für frühe Entwicklungsstadien festgestellt. Bei einer anschließenden Studie zur Unsicherheitsanalyse des Spektralmodells wurden PROSAIL-Ergebnisse, bei denen real gemessene Pflanzenparameter als Input dienten, den zugehörigen Reflektanzspektren gegenübergestellt. Es zeigten sich hierbei mitunter starke Abweichungen zwischen gemessenen und modellierten Spektren, die im Falle des Winterweizens einen saisonalen Verlauf zeichneten. Vor allem während frühen Wachstumsstadien tendierte das Modell dazu die Reflektanz im nahen Infrarot zu überschätzen, während es gegen Ende der Wachstumsperiode eher eine Unterschätzung aufwies. Als Unsicherheitsfaktor wurde die Parametrisierung des Modells ausgemacht, wenn der ALIA-Parameter als echter physikalische Blattwinkel interpretiert wird. Es wurde geschlussfolgert, dass eine Separierung von LAI und ALIA bei der Invertierung von PROSAIL eine korrekte Abschätzung der weniger sensitiven Parameter behindert. Die Erstellung des Vegetations-Prozessors erforderte die Verwendung von Regressions-Algorithmen des maschinellen Lernens (MLRA), da eine Verteilung von großen LUTs an die User nicht praktikabel wäre. Die MLRAs wurden an synthetischen Datensätzen trainiert, wobei zunächst die Optimierung der Hyperparameter im Vordergrund stand, bevor die Anwendung an echten Spektraldaten unternommen wurde. Es konnten dabei erst aussagekräftige Ergebnisse produziert werden, als die Trainingsdaten mit einem künstlichen Rauschen belegt wurden, da die Algorithmen unter einer Überanpassung an die Modellumgebung litten. Mithilfe des Prozessors konnten schließlich LAI, ALIA, Ccab und Cw aus hyperspektralen Daten abgeleitet werden. Künstliche neuronale Netze dienen dabei als Blackbox-Modelle, die in kurzer Zeit große Datenmengen verarbeiten können und somit einen entscheidenden Beitrag zur modernen angewandten Fernerkundung für eine breite User-Community leisten.After years of scientific and technical preparation, the launch of an unmanned German space-mission is planned to be initiated in 2020. The Environmental Mapping and Analysis Program (EnMAP) is going to provide an equally named hyperspectral imager to map land surfaces. Scientists of environmental disciplines of monitoring of ecosystems, agricultural, forestry and urban areas as well as coastal and inland waters, geology and soils prepared themselves for the upcoming data prior to the actual launch. Although there already exists a variety of useful algorithms for a profound analysis of spectral data, new challenges will arise given the uniqueness of the EnMAP-mission in the global context of remote sensing; i.e. coverage of the full range of the optical spectrum (420 nm – 2450 nm) in combination with a moderate spatial resolution of 30 m and a high signal-to-noise ratio of at least 180 in the shortwave infrared and above 400 in the visible spectrum. This enables an imaging quality which to this date has only been reached by airborne systems. The efforts of this dissertation comprise activities in the scientific preparation phase for agro-geographical tasks. Algorithms and tools for an analysis of hyperspectral data are being provided for free in the QGIS-plugin EnMAP-Box 3. Urgent questions in the agricultural sector revolve around the derivation of biochemical and biophysical parameters from remote sensing data. For this reason, the overarching objective of this promotion is the development of a scientific EnMAP-tool for managed areas of vegetation (EnMAP Managed Vegetation Scientific Processor). At first, an extensive field campaign was planned and then started in April, 2014. Apart from spectral observations of leaves, canopies and soils in a winter wheat and a maize field, also relevant plant parameters were acquired at the exact same spots. Namely, they are the Leaf Area Index (LAI), leaf chlorophyll content (Ccab), leaf water content (EWT or Cw), relative dry leaf weight (LMA or Cm), Average Leaf Inclination Angle (ALIA) as well as other secondary parameters like canopy height, phenological stage and the solar vector. Spectral measurements were captured from different observation angles to match ground data with the sensing geometry of the future EnMAP-satellite, which can be tilted up to 30° orthogonal to its direction of flight. A common procedure to derive relevant crop parameters is to make use of the radiative transfer model PROSAIL, which simulates the spectral signal of a vegetated surface based on biophysical and biochemical input parameters. If this process is reverted, said parameters can be derived from measured spectral data. To do so, a Look-Up-Table (LUT) is built containing model runs of PROSAIL and then subsequently compared against spectra from the field campaigns. With this approach of LUT-inversions from different observation angles, an accuracy of 18 % could be achieved for LAI and 20 % for Ccab. Strong anisotropic effects, i.e. dependence on illumination geometry and sensor orientation, were identified for winter wheat mainly in the early stages of plant development. In a consecutive study about uncertainties of the spectral model, PROSAIL results fed with in situ measured crop parameters as input, were opposed to their associated reflectance signatures. A strong deviation between measured and modelled spectra was observed, which – in the case of winter wheat – showed a seasonal behavior. The model tended to overestimate reflectances in the near infrared for early phenological stages and to underestimate them at end of the growing period. The parametrization of the model was identified as an uncertainty factor if the ALIA parameter is interpreted as true physical leaf inclinations. It was concluded that a separation of LAI and ALIA at inversion of PROSAIL prevents an adequate estimation of the less sensitive parameters. The development of the vegetation processor required the use of Machine Learning Regression Algorithms (MLRA), since distribution of large LUTs to the user would be impracticable. The MLRAs were trained with synthetic datasets with primary importance to optimize their hyperparameters, before attempting to apply the algorithms to real spectral data. Significant results could not be obtained until training data were altered with artificial noise, because algorithms suffered from overfitting to the model environment. Executing the processor allowed to derive LAI, ALIA, Ccab and Cw from hyperspectral data. Artificial neural networks served as black box models, which digest great amount of data in a short period of time and thus make a decisive contribution to modern applied remote sensing with relevance for a broad user-community