Coalitional Games for Transmitter Cooperation in MIMO Multiple Access Channels

Cooperation between nodes sharing a wireless channel is becoming increasingly necessary to achieve performance goals in a wireless network. The problem of determining the feasibility and stability of cooperation between rational nodes in a wireless network is of great importance in understanding cooperative behavior. This paper addresses the stability of the grand coalition of transmitters signaling over a multiple access channel using the framework of cooperative game theory. The external interference experienced by each TX is represented accurately by modeling the cooperation game between the TXs in \emph{partition form}. Single user decoding and successive interference cancelling strategies are examined at the receiver. In the absence of coordination costs, the grand coalition is shown to be \emph{sum-rate optimal} for both strategies. Transmitter cooperation is \emph{stable}, if and only if the core of the game (the set of all divisions of grand coalition utility such that no coalition deviates) is nonempty. Determining the stability of cooperation is a co-NP-complete problem in general. For a single user decoding receiver, transmitter cooperation is shown to be \emph{stable} at both high and low SNRs, while for an interference cancelling receiver with a fixed decoding order, cooperation is stable only at low SNRs and unstable at high SNR. When time sharing is allowed between decoding orders, it is shown using an approximate lower bound to the utility function that TX cooperation is also stable at high SNRs. Thus, this paper demonstrates that ideal zero cost TX cooperation over a MAC is stable and improves achievable rates for each individual user.Comment: in review for publication in IEEE Transactions on Signal Processin

Optical MIMO communication systems under illumination constraints

Technology for wireless information access has enabled innovation of 'smart' portable consumer devices. These have been widely adopted and have become an integral part of our daily lives. They need ubiquitous connectivity to the internet to provide value added services, maximize their functionality and create a smarter world to live in. Cisco's visual networking index currently predicts wireless data consumption to increase by 61% per year. This will put additional stress on the already stressed wireless access network infrastructure creating a phenomenon called 'spectrum crunch'. At the same time, the solid state devices industry has made remarkable advances in energy efficient light-emitting-diodes (LED). The lighting industry is rapidly adopting LEDs to provide illumination in indoor spaces. Lighting fixtures are positioned to support human activities and thus are well located to act as wireless access points. The visible spectrum (380 nm - 780 nm) is yet unregulated and untapped for wireless access. This provides unique opportunity to upgrade existing lighting infrastructure and create a dense grid of small cells by using this additional 'optical' wireless bandwidth. Under the above model, lighting fixtures will service dual missions of illumination and access points for optical wireless communication (OWC). This dissertation investigates multiple-input multiple-output (MIMO) optical wireless broadcast system under unique constraints imposed by the optical channel and illumination requirements. Sample indexed spatial orthogonal frequency division multiplexing (SIS-OFDM) and metameric modulation (MM) are proposed to achieve higher spectral efficiency by exploiting dimensions of space and color respectively in addition to time and frequency. SIS-OFDM can provide significant additional spectral efficiency of up to (Nsc/2 - 1) x k bits/sym where Nsc is total number of subcarriers and k is number of bits per underlying spatial modulation symbol. MM always generates the true requested illumination color and has the potential to provide better color rendering by incorporating multiple LEDs. A normalization framework is then developed to analyze performance of optical MIMO imaging systems. Performance improvements of up to 45 dB for optical systems have been achieved by decorrelating spatially separate links by incorporating an imaging receiver. The dissertation also studies the impact of visual perception on performance of color shift keying as specified in IEEE 802.15.7 standard. It shows that non-linearity for a practical system can have a performance penalty of up to 15 dB when compared to the simplified linear system abstraction as proposed in the standard. Luminous-signal-to-noise ratio, a novel metric is introduced to compare performance of optical modulation techniques operating at same illumination intensity. The dissertation then introduces singular value decomposition based OWC system architecture to incorporate illumination constraints independent of communication constraints in a MIMO system. It then studies design paradigm for a multi-colored wavelength division multiplexed indoor OWC system

Study and application of spectral monitoring techniques for optical network optimization

One of the possible ways to address the constantly increasing amount of heterogeneous and variable internet traffic is the evolution of the current optical networks towards a more flexible, open, and disaggregated paradigm. In such scenarios, the role played by Optical Performance Monitoring (OPM) is fundamental. In fact, OPM allows to balance performance and specification mismatches resulting from the disaggregation adoption and provides the control plane with the necessary feedback to grant the optical networks an adequate automation level. Therefore, new flexible and cost-effective OPM solutions are needed, as well as novel techniques to extract the desired information from the monitored data and process and apply them. In this dissertation, we focus on three aspects related to OPM. We first study a monitoring data plane scheme to acquire the high resolution signal optical spectra in a nonintrusive way. In particular, we propose a coherent detection based Optical Spectrum Analyzer (OSA) enhanced with specific Digital Signal Processing (DSP) to detect spectral slices of the considered optical signals. Then, we identify two main placement strategies for such monitoring solutions, enhancing them using two spectral processing techniques to estimate signal- and optical filter-related parameters. Specifically, we propose a way to estimate the Amplified Spontaneous Emission (ASE) noise or its related Optical Signal-to-Noise (OSNR) using optical spectra acquired at the egress ports of the network nodes and the filter central frequency and 3/6 dB bandwidth, using spectra captured at the ingress ports of the network nodes. To do so, we leverage Machine Learning (ML) algorithms and the function fitting principle, according to the considered scenario. We validate both the monitoring strategies and their related processing techniques through simulations and experiments. The obtained results confirm the validity of the two proposed estimation approaches. In particular, we are able to estimate in-band the OSNR/ASE noise within an egress monitor placement scenario, with a Maximum Absolute Error (MAE) lower than 0.4 dB. Moreover, we are able to estimate the filter central frequency and 3/6 dB bandwidth, within an ingress optical monitor placement scenario, with a MAE lower than 0.5 GHz and 0.98 GHz, respectively. Based on such evaluations, we also compare the two placement scenarios and provide guidelines on their implementation. According to the analysis of specific figures of merit, such as the estimation of the Signal-to-Noise Ratio (SNR) penalty introduced by an optical filter, we identify the ingress monitoring strategy as the most promising. In fact, when compared to scenarios where no monitoring strategy is adopted, the ingress one reduced the SNR penalty estimation by 92%. Finally, we identify a potential application for the monitored information. Specifically, we propose a solution for the optimization of the subchannel spectral spacing in a superchannel. Leveraging convex optimization methods, we implement a closed control loop process for the dynamical reconfiguration of the subchannel central frequencies to optimize specific Quality of Transmission (QoT)-related metrics. Such a solution is based on the information monitored at the superchannel receiver side. In particular, to make all the subchannels feasible, we consider the maximization of the total superchannel capacity and the maximization of the minimum superchannel subchannel SNR value. We validate the proposed approach using simulations, assuming scenarios with different subchannel numbers, signal characteristics, and starting frequency values. The obtained results confirm the effectiveness of our solution. Specifically, compared with the equally spaced subchannel scenario, we are able to improve the total and the minimum subchannel SNR values of a four subchannel superchannel, of 1.45 dB and 1.19 dB, respectively.Una de las posibles formas de hacer frente a la creciente cantidad de tráfico heterogéneo y variable de Internet es la evolución de las actuales redes ópticas hacia un paradigma más flexible, abierto y desagregado. En estos escenarios, el papel que desempeña el modulo óptico de monitorización de prestaciones (OPM) es fundamental. De hecho, el OPM permite equilibrar los desajustes de rendimiento y especificación, los cuales surgen con la adopción de la desagregación; del mismo modo el OPM también proporciona al plano de control la realimentación necesaria para otorgar un nivel de automatización adecuado a las redes ópticas. En esta tesis, nos centramos en tres aspectos relacionados con el OPM. En primer lugar, estudiamos un esquema de monitorización para adquirir, de forma no intrusiva, los espectros ópticos de señales de alta resolución. En concreto, proponemos un analizador de espectro óptico (OSA) basado en detección coherente y mejorado con un específico procesado digital de señal (DSP) para detectar cortes espectrales de las señales ópticas consideradas. A continuación, presentamos dos técnicas de colocación para dichas soluciones de monitorización, mejorándolas mediante dos técnicas de procesamiento espectral para estimar los parámetros relacionados con la señal y el filtro óptico. Específicamente, proponemos un método para estimar el ruido de emisión espontánea amplificada (ASE), o la relación de señal-ruido óptica (OSNR), utilizando espectros ópticos adquiridos en los puertos de salida de los nodos de la red. Del mismo modo, estimamos la frecuencia central del filtro y el ancho de banda de 3/6 dB, utilizando espectros capturados en los puertos de entrada de los nodos de la red. Para ello, aprovechamos los algoritmos de Machine Learning (ML) y el principio de function fitting, según el escenario considerado. Validamos tanto las estrategias de monitorización como las técnicas de procesamiento mediante simulaciones y experimentos. Se puede estimar en banda el ruido ASE/OSNR en un escenario de colocación de monitores de salida, con un Maximum Absolute Error (MAE) inferior a 0.4 dB. Además, se puede estimar la frecuencia central del filtro y el ancho de banda de 3/6 dB, dentro de un escenario de colocación de monitores ópticos de entrada, con un MAE inferior a 0.5 GHz y 0.98 GHz, respectivamente. A partir de estas evaluaciones, también comparamos los dos escenarios de colocación y proporcionamos directrices sobre su aplicación. Según el análisis de específicas figuras de mérito, como la estimación de la penalización de la relación señal-ruido (SNR) introducida por un filtro óptico, demostramos que la estrategia de monitorización de entrada es la más prometedora. De hecho, utilizar un sistema de monitorización de entrada redujo la estimación de la penalización del SNR en un 92%. Por último, identificamos una posible aplicación para la información monitorizada. En concreto, proponemos una solución para la optimización del espaciado espectral de los subcanales en un supercanal. Aprovechando los métodos de optimización convexa, implementamos un proceso cíclico de control cerrado para la reconfiguración dinámica de las frecuencias centrales de los subcanales con el fin de optimizar métricas específicas relacionadas con la calidad de la transmisión (QoT). Esta solución se basa en la información monitorizada en el lado del receptor del supercanal. Validamos el enfoque propuesto mediante simulaciones, asumiendo escenarios con un diferente número de subcanales, distintas características de la señal, y diversos valores de la frecuencia inicial. Los resultados obtenidos confirman la eficacia de nuestra solución. Más específicatamente, en comparación con el escenario de subcanales igualmente espaciados, se pueden mejorar los valores totales y minimos de SNR de los subcanales de un supercanal de cuatro subcanales, de 1.45 dB y 1.19 dB, respectivamentePostprint (published version