Assessment and Improvement of the Practical Use of Mutation for Automated Software Testing

Software testing is the main quality assurance technique used in software engineering. In fact, companies that develop software and open-source communities alike actively integrate testing into their software development life cycle. In order to guide and give objectives for the software testing process, researchers have designed test adequacy criteria (TAC) which, define the properties of a software that must be covered in order to constitute a thorough test suite. Many TACs have been designed in the literature, among which, the widely used statement and branch TAC, as well as the fault-based TAC named mutation. It has been shown in the literature that mutation is effective at revealing fault in software, nevertheless, mutation adoption in practice is still lagging due to its cost. Ideally, TACs that are most likely to lead to higher fault revelation are desired for testing and, the fault-revelation of test suites is expected to increase as their coverage of TACs test objectives increase. However, the question of which TAC best guides software testing towards fault revelation remains controversial and open, and, the relationship between TACs test objectives’ coverage and fault-revelation remains unknown. In order to increase knowledge and provide answers about these issues, we conducted, in this dissertation, an empirical study that evaluates the relationship between test objectives’ coverage and fault-revelation for four TACs (statement, branch coverage and, weak and strong mutation). The study showed that fault-revelation increase with coverage only beyond some coverage threshold and, strong mutation TAC has highest fault revelation. Despite the benefit of higher fault-revelation that strong mutation TAC provide for software testing, software practitioners are still reluctant to integrate strong mutation into their software testing activities. This happens mainly because of the high cost of mutation analysis, which is related to the large number of mutants and the limitation in the automation of test generation for strong mutation. Several approaches have been proposed, in the literature, to tackle the analysis’ cost issue of strong mutation. Mutant selection (reduction) approaches aim to reduce the number of mutants used for testing by selecting a small subset of mutation operator to apply during mutants generation, thus, reducing the number of analyzed mutants. Nevertheless, those approaches are not more effective, w.r.t. fault-revelation, than random mutant sampling (which leads to a high loss in fault revelation). Moreover, there is not much work in the literature that regards cost-effective automated test generation for strong mutation. This dissertation proposes two techniques, FaRM and SEMu, to reduce the cost of mutation testing. FaRM statically selects and prioritizes mutants that lead to faults (fault-revealing mutants), in order to reduce the number of mutants (fault-revealing mutants represent a very small proportion of the generated mutants). SEMu automatically generates tests that strongly kill mutants and thus, increase the mutation score and improve the test suites. First, this dissertation makes an empirical study that evaluates the fault-revelation (ability to lead to tests that have high fault-revelation) of four TACs, namely statement, branch, weak mutation and strong mutation. The outcome of the study show evidence that for all four studied TACs, the fault-revelation increases with TAC test objectives’ coverage only beyond a certain threshold of coverage. This suggests the need to attain higher coverage during testing. Moreover, the study shows that strong mutation is the only studied TAC that leads to tests that have, significantly, the highest fault-revelation. Second, in line with mutant reduction, we study the different mutant quality indicators (used to qualify "useful" mutants) proposed in the literature, including fault-revealing mutants. Our study shows that there is a large disagreement between the indicators suggesting that the fault-revealing mutant set is unique and differs from other mutant sets. Thus, given that testing aims to reveal faults, one should directly target fault-revealing mutants for mutant reduction. We also do so in this dissertation. Third, this dissertation proposes FaRM, a mutant reduction technique based on supervised machine learning. In order to automatically discriminate, before test execution, between useful (valuable) and useless mutants, FaRM build a mutants classification machine learning model. The features for the classification model are static program features of mutants categorized as mutant types and mutant context (abstract syntax tree, control flow graph and data/control dependency information). FaRM’s classification model successfully predicted fault-revealing mutants and killable mutants. Then, in order to reduce the number of analyzed mutants, FaRM selects and prioritizes fault-revealing mutants based of the aforementioned mutants classification model. An empirical evaluation shows that FaRM outperforms (w.r.t. the accuracy of fault-revealing mutant selection) random mutants sampling and existing mutation operators-based mutant selection techniques. Fourth, this dissertation proposes SEMu, an automated test input generation technique aiming to increase strong mutation coverage score of test suites. SEMu is based on symbolic execution and leverages multiple cost reduction heuristics for the symbolic execution. An empirical evaluation shows that, for limited time budget, the SEMu generates tests that successfully increase strong mutation coverage score and, kill more mutants than test generated by state-of-the-art techniques. Finally, this dissertation proposes Muteria a framework that enables the integration of FaRM and SEMu into the automated software testing process. Overall, this dissertation provides insights on how to effectively use TACs to test software, shows that strong mutation is the most effective TAC for software testing. It also provides techniques that effectively facilitate the practical use of strong mutation and, an extensive tooling to support the proposed techniques while enabling their extensions for the practical adoption of strong mutation in software testing

Fault Detection Effectiveness of Metamorphic Relations Developed for Testing Supervised Classifiers

In machine learning, supervised classifiers are used to obtain predictions for unlabeled data by inferring prediction functions using labeled data. Supervised classifiers are widely applied in domains such as computational biology, computational physics and healthcare to make critical decisions. However, it is often hard to test supervised classifiers since the expected answers are unknown. This is commonly known as the \emph{oracle problem} and metamorphic testing (MT) has been used to test such programs. In MT, metamorphic relations (MRs) are developed from intrinsic characteristics of the software under test (SUT). These MRs are used to generate test data and to verify the correctness of the test results without the presence of a test oracle. Effectiveness of MT heavily depends on the MRs used for testing. In this paper we have conducted an extensive empirical study to evaluate the fault detection effectiveness of MRs that have been used in multiple previous studies to test supervised classifiers. Our study uses a total of 709 reachable mutants generated by multiple mutation engines and uses data sets with varying characteristics to test the SUT. Our results reveal that only 14.8\% of these mutants are detected using the MRs and that the fault detection effectiveness of these MRs do not scale with the increased number of mutants when compared to what was reported in previous studies.Comment: 8 pages, AITesting 201

Automated metamorphic testing on the analyses of feature models

Copyright © 2010 Elsevier B.V. All rights reserved.Context: A feature model (FM) represents the valid combinations of features in a domain. The automated extraction of information from FMs is a complex task that involves numerous analysis operations, techniques and tools. Current testing methods in this context are manual and rely on the ability of the tester to decide whether the output of an analysis is correct. However, this is acknowledged to be time-consuming, error-prone and in most cases infeasible due to the combinatorial complexity of the analyses, this is known as the oracle problem.Objective: In this paper, we propose using metamorphic testing to automate the generation of test data for feature model analysis tools overcoming the oracle problem. An automated test data generator is presented and evaluated to show the feasibility of our approach.Method: We present a set of relations (so-called metamorphic relations) between input FMs and the set of products they represent. Based on these relations and given a FM and its known set of products, a set of neighbouring FMs together with their corresponding set of products are automatically generated and used for testing multiple analyses. Complex FMs representing millions of products can be efficiently created by applying this process iteratively.Results: Our evaluation results using mutation testing and real faults reveal that most faults can be automatically detected within a few seconds. Two defects were found in FaMa and another two in SPLOT, two real tools for the automated analysis of feature models. Also, we show how our generator outperforms a related manual suite for the automated analysis of feature models and how this suite can be used to guide the automated generation of test cases obtaining important gains in efficiency.Conclusion: Our results show that the application of metamorphic testing in the domain of automated analysis of feature models is efficient and effective in detecting most faults in a few seconds without the need for a human oracle.This work has been partially supported by the European Commission(FEDER)and Spanish Government under CICYT project SETI(TIN2009-07366)and the Andalusian Government project ISABEL(TIC-2533)

Semantic mutation testing

This is the Pre-print version of the Article. The official published version can be obtained from the link below - Copyright @ 2011 ElsevierMutation testing is a powerful and flexible test technique. Traditional mutation testing makes a small change to the syntax of a description (usually a program) in order to create a mutant. A test suite is considered to be good if it distinguishes between the original description and all of the (functionally non-equivalent) mutants. These mutants can be seen as representing potential small slips and thus mutation testing aims to produce a test suite that is good at finding such slips. It has also been argued that a test suite that finds such small changes is likely to find larger changes. This paper describes a new approach to mutation testing, called semantic mutation testing. Rather than mutate the description, semantic mutation testing mutates the semantics of the language in which the description is written. The mutations of the semantics of the language represent possible misunderstandings of the description language and thus capture a different class of faults. Since the likely misunderstandings are highly context dependent, this context should be used to determine which semantic mutants should be produced. The approach is illustrated through examples with statecharts and C code. The paper also describes a semantic mutation testing tool for C and the results of experiments that investigated the nature of some semantic mutation operators for C

Soluble oligomerization provides a beneficial fitness effect on destabilizing mutations.

Protein stability is widely recognized as a major evolutionary constraint. However, the relation between mutation-induced perturbations of protein stability and biological fitness has remained elusive. Here we explore this relation by introducing a selected set of mostly destabilizing mutations into an essential chromosomal gene of E.coli encoding dihydrofolate reductase (DHFR) to determine how changes in protein stability, activity and abundance affect fitness. Several mutant strains showed no growth while many exhibited fitness higher than wild type. Overexpression of chaperonins (GroEL/ES) buffered the effect of mutations by rescuing the lethal phenotypes and worsening better-fit strains. Changes in stability affect fitness by mediating the abundance of active and soluble proteins; DHFR of lethal strains aggregates, while destabilized DHFR of high fitness strains remains monomeric and soluble at 30oC and forms soluble oligomers at 42oC. These results suggest an evolutionary path where mutational destabilization is counterbalanced by specific oligomerization protecting proteins from aggregation

Empirical Evaluation of Mutation-based Test Prioritization Techniques

We propose a new test case prioritization technique that combines both mutation-based and diversity-based approaches. Our diversity-aware mutation-based technique relies on the notion of mutant distinguishment, which aims to distinguish one mutant's behavior from another, rather than from the original program. We empirically investigate the relative cost and effectiveness of the mutation-based prioritization techniques (i.e., using both the traditional mutant kill and the proposed mutant distinguishment) with 352 real faults and 553,477 developer-written test cases. The empirical evaluation considers both the traditional and the diversity-aware mutation criteria in various settings: single-objective greedy, hybrid, and multi-objective optimization. The results show that there is no single dominant technique across all the studied faults. To this end, \rev{we we show when and the reason why each one of the mutation-based prioritization criteria performs poorly, using a graphical model called Mutant Distinguishment Graph (MDG) that demonstrates the distribution of the fault detecting test cases with respect to mutant kills and distinguishment

Adversarial Sample Detection for Deep Neural Network through Model Mutation Testing

Deep neural networks (DNN) have been shown to be useful in a wide range of applications. However, they are also known to be vulnerable to adversarial samples. By transforming a normal sample with some carefully crafted human imperceptible perturbations, even highly accurate DNN make wrong decisions. Multiple defense mechanisms have been proposed which aim to hinder the generation of such adversarial samples. However, a recent work show that most of them are ineffective. In this work, we propose an alternative approach to detect adversarial samples at runtime. Our main observation is that adversarial samples are much more sensitive than normal samples if we impose random mutations on the DNN. We thus first propose a measure of `sensitivity' and show empirically that normal samples and adversarial samples have distinguishable sensitivity. We then integrate statistical hypothesis testing and model mutation testing to check whether an input sample is likely to be normal or adversarial at runtime by measuring its sensitivity. We evaluated our approach on the MNIST and CIFAR10 datasets. The results show that our approach detects adversarial samples generated by state-of-the-art attacking methods efficiently and accurately.Comment: Accepted by ICSE 201

Is the Stack Distance Between Test Case and Method Correlated With Test Effectiveness?

Mutation testing is a means to assess the effectiveness of a test suite and its outcome is considered more meaningful than code coverage metrics. However, despite several optimizations, mutation testing requires a significant computational effort and has not been widely adopted in industry. Therefore, we study in this paper whether test effectiveness can be approximated using a more light-weight approach. We hypothesize that a test case is more likely to detect faults in methods that are close to the test case on the call stack than in methods that the test case accesses indirectly through many other methods. Based on this hypothesis, we propose the minimal stack distance between test case and method as a new test measure, which expresses how close any test case comes to a given method, and study its correlation with test effectiveness. We conducted an empirical study with 21 open-source projects, which comprise in total 1.8 million LOC, and show that a correlation exists between stack distance and test effectiveness. The correlation reaches a strength up to 0.58. We further show that a classifier using the minimal stack distance along with additional easily computable measures can predict the mutation testing result of a method with 92.9% precision and 93.4% recall. Hence, such a classifier can be taken into consideration as a light-weight alternative to mutation testing or as a preceding, less costly step to that.Comment: EASE 201