Equivalent random analysis of a buffered optical switch with general interarrival times

We propose an approximate analytic model of an optical switch with fibre delay lines and wavelength converters by employing Equivalent Random Theory. General arrival traffic is modelled by means of Gamma-distributed interarrival times. The analysis is formulated in terms of virtual traffic flows within the optical switch from which we derive expressions for burst blocking probability, fibre delay line occupancy and mean delay. Emphasis is on approximations that give good numerical efficiency so that the method can be useful for formulating dimensioning problems for large-scale networks. Numerical solution values from the proposed analysis method compare well with results from a discrete-event simulation of an optical burst switch

A hybrid queueing model for fast broadband networking simulation

PhDThis research focuses on the investigation of a fast simulation method for broadband telecommunication networks, such as ATM networks and IP networks. As a result of this research, a hybrid simulation model is proposed, which combines the analytical modelling and event-driven simulation modelling to speeding up the overall simulation. The division between foreground and background traffic and the way of dealing with these different types of traffic to achieve improvement in simulation time is the major contribution reported in this thesis. Background traffic is present to ensure that proper buffering behaviour is included during the course of the simulation experiments, but only the foreground traffic of interest is simulated, unlike traditional simulation techniques. Foreground and background traffic are dealt with in a different way. To avoid the need for extra events on the event list, and the processing overhead, associated with the background traffic, the novel technique investigated in this research is to remove the background traffic completely, adjusting the service time of the queues for the background traffic to compensate (in most cases, the service time for the foreground traffic will increase). By removing the background traffic from the event-driven simulator the number of cell processing events dealt with is reduced drastically. Validation of this approach shows that, overall, the method works well, but the simulation using this method does have some differences compared with experimental results on a testbed. The reason for this is mainly because of the assumptions behind the analytical model that make the modelling tractable. Hence, the analytical model needs to be adjusted. This is done by having a neural network trained to learn the relationship between the input traffic parameters and the output difference between the proposed model and the testbed. Following this training, simulations can be run using the output of the neural network to adjust the analytical model for those particular traffic conditions. The approach is applied to cell scale and burst scale queueing to simulate an ATM switch, and it is also used to simulate an IP router. In all the applications, the method ensures a fast simulation as well as an accurate result

Creation and Simulation of a Model for a Discrete Time Buffer System with Interrupted Poisson Arrivals and Uncorrelated Server Interruptions

A mathematical model for a discrete-time buffer system with both arrival and server interruptions is developed. In this model fixed-size packets arrive at the buffer according to a Poisson distribution and are stored there until they can be transmitted over the output channel. Service times are constant and the buffer is assumed to be of infinite size. Both arrival stream as well as the service of the packets are subjected to random interruptions described by Bernoulli processes, where the interruption process of the Poisson input stream is uncorrelated to the interruptions of the output line. Expressions are derived for the mean waiting time, the mean queue length, the average lengths of idle and busy periods of the server, and for the server utilization. The behavior of the system is demonstrated with a computer simulation; the simulation results are used to indicate optimal buffer sizes

Performance Modelling and Optimisation of Multi-hop Networks

A major challenge in the design of large-scale networks is to predict and optimise the total time and energy consumption required to deliver a packet from a source node to a destination node. Examples of such complex networks include wireless ad hoc and sensor networks which need to deal with the effects of node mobility, routing inaccuracies, higher packet loss rates, limited or time-varying effective bandwidth, energy constraints, and the computational limitations of the nodes. They also include more reliable communication environments, such as wired networks, that are susceptible to random failures, security threats and malicious behaviours which compromise their quality of service (QoS) guarantees. In such networks, packets traverse a number of hops that cannot be determined in advance and encounter non-homogeneous network conditions that have been largely ignored in the literature. This thesis examines analytical properties of packet travel in large networks and investigates the implications of some packet coding techniques on both QoS and resource utilisation. Specifically, we use a mixed jump and diffusion model to represent packet traversal through large networks. The model accounts for network non-homogeneity regarding routing and the loss rate that a packet experiences as it passes successive segments of a source to destination route. A mixed analytical-numerical method is developed to compute the average packet travel time and the energy it consumes. The model is able to capture the effects of increased loss rate in areas remote from the source and destination, variable rate of advancement towards destination over the route, as well as of defending against malicious packets within a certain distance from the destination. We then consider sending multiple coded packets that follow independent paths to the destination node so as to mitigate the effects of losses and routing inaccuracies. We study a homogeneous medium and obtain the time-dependent properties of the packet’s travel process, allowing us to compare the merits and limitations of coding, both in terms of delivery times and energy efficiency. Finally, we propose models that can assist in the analysis and optimisation of the performance of inter-flow network coding (NC). We analyse two queueing models for a router that carries out NC, in addition to its standard packet routing function. The approach is extended to the study of multiple hops, which leads to an optimisation problem that characterises the optimal time that packets should be held back in a router, waiting for coding opportunities to arise, so that the total packet end-to-end delay is minimised

Performance analysis of priority queueing systems in discrete time

The integration of different types of traffic in packet-based networks spawns the need for traffic differentiation. In this tutorial paper, we present some analytical techniques to tackle discrete-time queueing systems with priority scheduling. We investigate both preemptive (resume and repeat) and non-preemptive priority scheduling disciplines. Two classes of traffic are considered, high-priority and low-priority traffic, which both generate variable-length packets. A probability generating functions approach leads to performance measures such as moments of system contents and packet delays of both classes

An Analytical Approach to Cycle Time Evaluation in an Unreliable Multi-Product Production Line with Finite Buffers

This thesis develops an analytical approximation method to measure the performance of a multi-product unreliable production line with finite buffers between workstations. The performance measure used in this thesis is Total Cycle Time. The proposed approximation method generalizes the processing times to relax the variation of product types in a multi-product system. A decomposition method is then employed to approximate the production rate of a multi-product production line. The decomposition method considers generally distributed processing times as well as random failure and repair. A GI/G/1/N queuing model is also applied to obtain parameters such as blocking and starving probabilities that are needed for the approximation procedure. Several numerical experiments under different scenarios are performed, and results are validated by simulation models in order to assess the accuracy and strength of the approximation method. Consequent analysis and discussion of the results is also presented

Analysis of generic discrete-time buffer models with irregular packet arrival patterns

De kwaliteit van de multimediadiensten die worden aangeboden over de huidige breedband-communicatienetwerken, wordt in hoge mate bepaald door de performantie van de buffers die zich in de diverse netwerkele-menten (zoals schakelknooppunten, routers, modems, toegangsmultiplexers, netwerkinter- faces, ...) bevinden. In dit proefschrift bestuderen we de performantie van een dergelijke buffer met behulp van een geschikt stochastisch discrete-tijd wachtlijnmodel, waarbij we het geval van meerdere uitgangskanalen en (niet noodzakelijk identieke) pakketbronnen beschouwen, en de pakkettransmissietijden in eerste instantie één slot bedragen. De grillige, of gecorreleerde, aard van een pakketstroom die door een bron wordt gegenereerd, wordt gekarakteriseerd aan de hand van een algemeen D-BMAP (discrete-batch Markovian arrival process), wat een generiek kader creëert voor het beschrijven van een superpositie van dergelijke informatiestromen. In een later stadium breiden we onze studie uit tot het geval van transmissietijden met een algemene verdeling, waarbij we ons beperken tot een buffer met één enkel uitgangskanaal. De analyse van deze wachtlijnmodellen gebeurt hoofdzakelijk aan de hand van een particuliere wiskundig-analytische aanpak waarbij uitvoerig gebruik gemaakt wordt van probabiliteitsgenererende functies, die er toe leidt dat de diverse performantiematen (min of meer expliciet) kunnen worden uitgedrukt als functie van de systeemparameters. Dit resul-teert op zijn beurt in efficiënte en accurate berekeningsalgoritmen voor deze grootheden, die op relatief eenvoudige wijze geïmplementeerd kunnen worden

Analysis of a discrete-time single-server queue with an occasional extra server

We consider a discrete-time queueing system having two distinct servers: one server, the "regular" server, is permanently available, while the second server, referred to as the "extra" server, is only allocated to the system intermittently. Apart from their availability, the two servers are identical, in the sense that the customers have deterministic service times equal to 1 fixed-length time slot each, regardless of the server that processes them. In this paper, we assume that the extra server is available during random "up-periods", whereas it is unavailable during random "down-periods". Up-periods and down-periods occur alternately on the time axis. The up-periods have geometrically distributed lengths (expressed in time slots), whereas the distribution of the lengths of the down-periods is general, at least in the first instance. Customers enter the system according to a general independent arrival process, i.e., the numbers of arrivals during consecutive time slots are i.i.d. random variables with arbitrary distribution. For this queueing model, we are able to derive closed-form expressions for the steady-state probability generating functions (pgfs) and the expected values of the numbers of customers in the system at various observation epochs, such as the start of an up-period, the start of a down-period and the beginning of an arbitrary time slot. At first sight, these formulas, however, appear to contain an infinite number of unknown constants. One major issue of the mathematical analysis turns out to be the determination of these constants. In the paper, we show that restricting the pgf of the down-periods to be a rational function of its argument, brings about the crucial simplification that the original infinite number of unknown constants appearing in the formulas can be expressed in terms of a finite number of independent unknowns. The latter can then be adequately determined based on the bounded nature of pgfs inside the complex unit disk, and an extensive use of properties of polynomials. Various special cases, both from the perspective of the arrival distribution and the down-period distribution, are discussed. The results are also illustrated by means of relevant numerical examples. Possible applications of this type of queueing model are numerous: the extra server could be the regular server of another similar queue, helping whenever an idle period occurs in its own queue; a geometric distribution for these idle times is then a very natural modeling assumption. A typical example would be the situation at the check-in counter at a gate in an airport: the regular server serves customers with a low-fare ticket, while the extra server gives priority to the business-class and first-class customers, but helps checking regular customers, whenever the priority line is empty. (C) 2017 Elsevier B.V. All rights reserved

A Simple, Practical Prioritization Scheme for a Job Shop Processing Multiple Job Types

The maintenance, repair, and overhaul (MRO) process is used to recondition equipment in the railroad, off-shore drilling, aircraft, and shipping industries. In the typical MRO process, the equipment is disassembled into component parts and these parts are routed to back-shops for repair. Repaired parts are returned for reassembling the equipment. Scheduling the back-shop for smooth flow often requires prioritizing the repair of component parts from different original assemblies at different machines. To enable such prioritization, we model the back-shop as a multi-class queueing network with a ConWIP execution system and introduce a new priority scheme to maximize the system performance. In this scheme, we identify the bottleneck machine based on overall workload and classify machines into two categories: the bottleneck machine and the non-bottleneck machine(s). Assemblies with the lowest cycle time receive the highest priority on the bottleneck machine and the lowest priority on non-bottleneck machine(s). Our experimental results show that this priority scheme increases the system performance by lowering the average cycle times without adversely impacting the total throughput. The contribution of this thesis consists primarily of three parts. First, we develop a simple priority scheme for multi-class, multi-server, ConWIP queueing systems with the disassembly/reassembly feature so that schedulers for a job-shop environment would be able to know which part should be given priority, in what order and where. Next, we provide an exact analytical solution to a two-class, two-server closed queueing model with mixed non-preemptive priority scheme. The queueing network model we study has not been analyzed in the literature, and there are no existing models that address the underlying problem of deciding prioritization by job types to maximize the system performance. Finally, we explore conditions under which the non-preemptive priority discipline can be approximated by a preemptive priority discipline