On thermal sensor calibration and software techniques for many-core thermal management

The high power density of a many-core processor results in increased temperature which negatively impacts system reliability and performance. Dynamic thermal management applies thermal-aware techniques at run time to avoid overheating using temperature information collected from on-chip thermal sensors. Temperature sensing and thermal control schemes are two critical technologies for successfully maintaining thermal safety. In this dissertation, on-line thermal sensor calibration schemes are developed to provide accurate temperature information. Software-based dynamic thermal management techniques are proposed using calibrated thermal sensors. Due to process variation and silicon aging, on-chip thermal sensors require periodic calibration before use in DTM. However, the calibration cost for thermal sensors can be prohibitively high as the number of on-chip sensors increases. Linear models which are suitable for on-line calculation are employed to estimate temperatures at multiple sensor locations using performance counters. The estimated temperature and the actual sensor thermal profile show a very high similarity with correlation coefficient ~0.9 for SPLASH2 and SPEC2000 benchmarks. A calibration approach is proposed to combine potentially inaccurate temperature values obtained from two sources: thermal sensor readings and temperature estimations. A data fusion strategy based on Bayesian inference, which combines information from these two sources, is demonstrated. The result shows the strategy can effectively recalibrate sensor readings in response to inaccuracies caused by process variation and environmental noise. The average absolute error of the corrected sensor temperature readings is A dynamic task allocation strategy is proposed to address localized overheating in many-core systems. Our approach employs reinforcement learning, a dynamic machine learning algorithm that performs task allocation based on current temperatures and a prediction regarding which assignment will minimize the peak temperature. Our results show that the proposed technique is fast (scheduling performed in \u3c1 \u3ems) and can efficiently reduce peak temperature by up to 8 degree C in a 49-core processor (6% on average) versus a leading competing task allocation approach for a series of SPLASH-2 benchmarks. Reinforcement learning has also been applied to 3D integrated circuits to allocate tasks with thermal awareness

Capstan drive transport system for motion picture film

The work presented describes the development of a capstan drive system for the transport of motion picture film. From a model description of the plant and computer aided system design analysis, control algorithms are formulated. The work shows how these relativity complex control algorithms are implemented by making use of the parallel processing capabilities of the transputer. A critical investigation of current film transport methods is undertaken leading to the design and testing of a prototype capstan drive mechanism. The capstan drive system is shown to eliminate problems of sprocket drives and their associated mechanisms. A multi-input multi-output controller is presented using state-space methods of design. The developed control strategies are fully tested on a model of the plant before hardware testing. The control outputs of the system are speed and tension. The final control solution is shown to be a combination of full-state feedback, integral control, and a Kalman filter estimator for the elimination of system disturbances. The transputer implementation of the developed control strategies is presented together with a comparison between simulation and experimental results. It is shown that computational times can be reduced by using multiple transputers and placing computation-intensive sections of the control algorithm on separate processors. Transputer configurations and interconnections are shown. The capstan system has been shown to allow faster printing speeds with improved transport accuracy leading to better quality of the final picture print. The system has been shown to be 'robust' to external disturbances and changes in plant parameters

Revisiting Matrix Product on Master-Worker Platforms

This paper is aimed at designing efficient parallel matrix-product algorithms for heterogeneous master-worker platforms. While matrix-product is well-understood for homogeneous 2D-arrays of processors (e.g., Cannon algorithm and ScaLAPACK outer product algorithm), there are three key hypotheses that render our work original and innovative: - Centralized data. We assume that all matrix files originate from, and must be returned to, the master. - Heterogeneous star-shaped platforms. We target fully heterogeneous platforms, where computational resources have different computing powers. - Limited memory. Because we investigate the parallelization of large problems, we cannot assume that full matrix panels can be stored in the worker memories and re-used for subsequent updates (as in ScaLAPACK). We have devised efficient algorithms for resource selection (deciding which workers to enroll) and communication ordering (both for input and result messages), and we report a set of numerical experiments on various platforms at Ecole Normale Superieure de Lyon and the University of Tennessee. However, we point out that in this first version of the report, experiments are limited to homogeneous platforms

A generalized software framework for accurate and efficient management of performance goals

A number of techniques have been proposed to provide runtime performance guarantees while minimizing power consumption. One drawback of existing approaches is that they work only on a fixed set of components (or actuators) that must be specified at design time. If new components become available, these management systems must be redesigned and reimplemented. In this paper, we propose PTRADE, a novel performance management framework that is general with respect to the components it manages. PTRADE can be deployed to work on a new system with different components without redesign and reimplementation. PTRADE's generality is demonstrated through the management of performance goals for a variety of benchmarks on two different Linux/x86 systems and a simulated 128-core system, each with different components governing power and performance tradeoffs. Our experimental results show that PTRADE provides generality while meeting performance goals with low error and close to optimal power consumption.United States. Defense Advanced Research Projects Agency. The Ubiquitous High Performance Computing Progra

FPGAs in Industrial Control Applications

The aim of this paper is to review the state-of-the-art of Field Programmable Gate Array (FPGA) technologies and their contribution to industrial control applications. Authors start by addressing various research fields which can exploit the advantages of FPGAs. The features of these devices are then presented, followed by their corresponding design tools. To illustrate the benefits of using FPGAs in the case of complex control applications, a sensorless motor controller has been treated. This controller is based on the Extended Kalman Filter. Its development has been made according to a dedicated design methodology, which is also discussed. The use of FPGAs to implement artificial intelligence-based industrial controllers is then briefly reviewed. The final section presents two short case studies of Neural Network control systems designs targeting FPGAs