9,138 research outputs found

    Design and Characterization of Crossbar architecture Velostat-based Flexible Writing Pad

    Full text link
    Pressure sensors are popular in a large variety of industries. For some applications, it is critical for these sensors to come in a flexible form factor. With the development of new synthetic polymers and novel fabrication techniques, flexible pressure sensing arrays are more easily accessible and can serve a variety of applications. As part of this dissertation, we demonstrate one such application of the same by developing a low-cost flexible writing pad and doing crosstalk analysis on sensors with similar working principles. We present a low-cost, flexible writing pad that uses a 16x16 pressure sensing matrix based on the piezoresistive thin film of velostat. The writing area is 5 cm x 5 cm with an effective pixel area of 0.06 mm^2. A read-out circuit is designed to detect the change in resistance of the velostat pixel using a voltage divider. A microprocessor raster scans through the sensor pixel matrix to obtain a data frame of 256 numbers. This data is processed using techniques like squaring and normalising (S\&N), Gaussian blurring, and adaptive thresholding to generate a more readable output. The writing pad is able to resolve characters larger than 2 cm in length. The flexible writing pad produces legible output while flexed at a bending radius of up to 4 cm. Such flexibility promises to enhance the usability and portability of the writing pad significantly. We noticed that the raw data produced by the writing pad had a lot of crosstalk which we were subsequently able to resolve using the algorithms mentioned above. Such crosstalk has been reported in literature multiple times and is common, especially for sensors of the crossbar architecture.Crosstalk, in a sensor matrix, is the unwanted signal obtained at a sensor pixel that is not directly related to the stimulus. This paper presents a novel approach towards quantifying the crosstalk characteristics of a sensor matrix

    Technology for Low Resolution Space Based RSO Detection and Characterisation

    Get PDF
    Space Situational Awareness (SSA) refers to all activities to detect, identify and track objects in Earth orbit. SSA is critical to all current and future space activities and protect space assets by providing access control, conjunction warnings, and monitoring status of active satellites. Currently SSA methods and infrastructure are not sufficient to account for the proliferations of space debris. In response to the need for better SSA there has been many different areas of research looking to improve SSA most of the requiring dedicated ground or space-based infrastructure. In this thesis, a novel approach for the characterisation of RSO’s (Resident Space Objects) from passive low-resolution space-based sensors is presented with all the background work performed to enable this novel method. Low resolution space-based sensors are common on current satellites, with many of these sensors being in space using them passively to detect RSO’s can greatly augment SSA with out expensive infrastructure or long lead times. One of the largest hurtles to overcome with research in the area has to do with the lack of publicly available labelled data to test and confirm results with. To overcome this hurtle a simulation software, ORBITALS, was created. To verify and validate the ORBITALS simulator it was compared with the Fast Auroral Imager images, which is one of the only publicly available low-resolution space-based images found with auxiliary data. During the development of the ORBITALS simulator it was found that the generation of these simulated images are computationally intensive when propagating the entire space catalog. To overcome this an upgrade of the currently used propagation method, Specialised General Perturbation Method 4th order (SGP4), was performed to allow the algorithm to run in parallel reducing the computational time required to propagate entire catalogs of RSO’s. From the results it was found that the standard facet model with a particle swarm optimisation performed the best estimating an RSO’s attitude with a 0.66 degree RMSE accuracy across a sequence, and ~1% MAPE accuracy for the optical properties. This accomplished this thesis goal of demonstrating the feasibility of low-resolution passive RSO characterisation from space-based platforms in a simulated environment

    Beam scanning by liquid-crystal biasing in a modified SIW structure

    Get PDF
    A fixed-frequency beam-scanning 1D antenna based on Liquid Crystals (LCs) is designed for application in 2D scanning with lateral alignment. The 2D array environment imposes full decoupling of adjacent 1D antennas, which often conflicts with the LC requirement of DC biasing: the proposed design accommodates both. The LC medium is placed inside a Substrate Integrated Waveguide (SIW) modified to work as a Groove Gap Waveguide, with radiating slots etched on the upper broad wall, that radiates as a Leaky-Wave Antenna (LWA). This allows effective application of the DC bias voltage needed for tuning the LCs. At the same time, the RF field remains laterally confined, enabling the possibility to lay several antennas in parallel and achieve 2D beam scanning. The design is validated by simulation employing the actual properties of a commercial LC medium

    Multi-Robot Multi-Room Exploration with Geometric Cue Extraction and Spherical Decomposition

    Full text link
    This work proposes an autonomous multi-robot exploration pipeline that coordinates the behaviors of robots in an indoor environment composed of multiple rooms. Contrary to simple frontier-based exploration approaches, we aim to enable robots to methodically explore and observe an unknown set of rooms in a structured building, keeping track of which rooms are already explored and sharing this information among robots to coordinate their behaviors in a distributed manner. To this end, we propose (1) a geometric cue extraction method that processes 3D map point cloud data and detects the locations of potential cues such as doors and rooms, (2) a spherical decomposition for open spaces used for target assignment. Using these two components, our pipeline effectively assigns tasks among robots, and enables a methodical exploration of rooms. We evaluate the performance of our pipeline using a team of up to 3 aerial robots, and show that our method outperforms the baseline by 36.6% in simulation and 26.4% in real-world experiments

    Technical Report on: Tripedal Dynamic Gaits for a Quadruped Robot

    Full text link
    A vast number of applications for legged robots entail tasks in complex, dynamic environments. But these environments put legged robots at high risk for limb damage. This paper presents an empirical study of fault tolerant dynamic gaits designed for a quadrupedal robot suffering from a single, known ``missing'' limb. Preliminary data suggests that the featured gait controller successfully anchors a previously developed planar monopedal hopping template in the three-legged spatial machine. This compositional approach offers a useful and generalizable guide to the development of a wider range of tripedal recovery gaits for damaged quadrupedal machines.Comment: Updated *increased font size on figures 2-6 *added a legend, replaced text with colors in figure 5a and 6a *made variables representing vectors boldface in equations 8-10 *expanded on calculations in equations 8-10 by adding additional lines *added a missing "2" to equation 8 (typo) *added mass of the robot to tables II and III *increased the width of figures 1 and

    GelSight360: An Omnidirectional Camera-Based Tactile Sensor for Dexterous Robotic Manipulation

    Full text link
    Camera-based tactile sensors have shown great promise in enhancing a robot's ability to perform a variety of dexterous manipulation tasks. Advantages of their use can be attributed to the high resolution tactile data and 3D depth map reconstructions they can provide. Unfortunately, many of these tactile sensors use either a flat sensing surface, sense on only one side of the sensor's body, or have a bulky form-factor, making it difficult to integrate the sensors with a variety of robotic grippers. Of the camera-based sensors that do have all-around, curved sensing surfaces, many cannot provide 3D depth maps; those that do often require optical designs specified to a particular sensor geometry. In this work, we introduce GelSight360, a fingertip-like, omnidirectional, camera-based tactile sensor capable of producing depth maps of objects deforming the sensor's surface. In addition, we introduce a novel cross-LED lighting scheme that can be implemented in different all-around sensor geometries and sizes, allowing the sensor to easily be reconfigured and attached to different grippers of varying DOFs. With this work, we enable roboticists to quickly and easily customize high resolution tactile sensors to fit their robotic system's needs

    Design and Implementation of Indoor Disinfection Robot System

    Get PDF
    After the outbreak of COVID-19 virus, disinfection has become one of the important means of epidemic prevention. Traditional manual disinfection can easily cause cross infection problems. Using robots to complete disinfection work can reduce people's social contact and block the spread of viruses. This thesis implements an engineering prototype of a indoor disinfection robot from the perspective of product development, with the amin of using robots to replace manual disinfection operations. The thesis uses disinfection module, control module and navigation module to compose the hardware of the robot. The disinfection module uses ultrasonic atomizers, UV-C ultraviolet disinfection lamps, and air purifiers to disinfect and disinfect the ground and air respectively. The control module is responsible for the movement and obstacle avoidance of the robot. The navigation module uses Raspberry Pi and LiDAR to achieve real-time robot positioning and two-dimensional plane mapping. In terms of robot software,we have done the following work: (1) Based on the ROS framework, we have implemented functions such as SLAM mapping, location positioning, and odometer data calibration.(2) Customize communication protocols to manage peripheral devices such as UV-C lights, ultrasonic atomizers, air purifiers, and motors on the control board. (3) Develop an Android mobile app that utilizes ROSBridge's lightweight communication architecture to achieve cross platform data exchange between mobile devices and navigation boards, as well as network connectivity and interaction between mobile phones and robots Finally, this thesis implements an engineering prototype of a household disinfection robot from the perspective of product development

    Humanoid Robot Co-Design: Coupling Hardware Design with Gait Generation via Hybrid Zero Dynamics

    Full text link
    Selecting robot design parameters can be challenging since these parameters are often coupled with the performance of the controller and, therefore, the resulting capabilities of the robot. This leads to a time-consuming and often expensive process whereby one iterates between designing the robot and manually evaluating its capabilities. This is particularly challenging for bipedal robots, where it can be difficult to evaluate the behavior of the system due to the underlying nonlinear and hybrid dynamics. Thus, in an effort to streamline the design process of bipedal robots, and maximize their performance, this paper presents a systematic framework for the co-design of humanoid robots and their associated walking gaits. To this end, we leverage the framework of hybrid zero dynamic (HZD) gait generation, which gives a formal approach to the generation of dynamic walking gaits. The key novelty of this paper is to consider both virtual constraints associated with the actuators of the robot, coupled with design virtual constraints that encode the associated parameters of the robot to be designed. These virtual constraints are combined in an HZD optimization problem which simultaneously determines the design parameters while finding a stable walking gait that minimizes a given cost function. The proposed approach is demonstrated through the design of a novel humanoid robot, ADAM, wherein its thigh and shin are co-designed so as to yield energy efficient bipedal locomotion.Comment: 7 pages, 6 figures, accepted to CDC 202

    Active Learning of Discrete-Time Dynamics for Uncertainty-Aware Model Predictive Control

    Full text link
    Model-based control requires an accurate model of the system dynamics for precisely and safely controlling the robot in complex and dynamic environments. Moreover, in the presence of variations in the operating conditions, the model should be continuously refined to compensate for dynamics changes. In this paper, we present a self-supervised learning approach that actively models the dynamics of nonlinear robotic systems. We combine offline learning from past experience and online learning from current robot interaction with the unknown environment. These two ingredients enable a highly sample-efficient and adaptive learning process, capable of accurately inferring model dynamics in real-time even in operating regimes that greatly differ from the training distribution. Moreover, we design an uncertainty-aware model predictive controller that is heuristically conditioned to the aleatoric (data) uncertainty of the learned dynamics. This controller actively chooses the optimal control actions that (i) optimize the control performance and (ii) improve the efficiency of online learning sample collection. We demonstrate the effectiveness of our method through a series of challenging real-world experiments using a quadrotor system. Our approach showcases high resilience and generalization capabilities by consistently adapting to unseen flight conditions, while it significantly outperforms classical and adaptive control baselines

    Utilizing artificial intelligence in perioperative patient flow:systematic literature review

    Get PDF
    Abstract. The purpose of this thesis was to map the existing landscape of artificial intelligence (AI) applications used in secondary healthcare, with a focus on perioperative care. The goal was to find out what systems have been developed, and how capable they are at controlling perioperative patient flow. The review was guided by the following research question: How is AI currently utilized in patient flow management in the context of perioperative care? This systematic literature review examined the current evidence regarding the use of AI in perioperative patient flow. A comprehensive search was conducted in four databases, resulting in 33 articles meeting the inclusion criteria. Findings demonstrated that AI technologies, such as machine learning (ML) algorithms and predictive analytics tools, have shown somewhat promising outcomes in optimizing perioperative patient flow. Specifically, AI systems have proven effective in predicting surgical case durations, assessing risks, planning treatments, supporting diagnosis, improving bed utilization, reducing cancellations and delays, and enhancing communication and collaboration among healthcare providers. However, several challenges were identified, including the need for accurate and reliable data sources, ethical considerations, and the potential for biased algorithms. Further research is needed to validate and optimize the application of AI in perioperative patient flow. The contribution of this thesis is summarizing the current state of the characteristics of AI application in perioperative patient flow. This systematic literature review provides information about the features of perioperative patient flow and the clinical tasks of AI applications previously identified
    • …
    corecore