On the minimum number of states for switchable matching networks

The impedance of an antenna changes heavily with changing EM environments, while RF power amplifiers (PAs) are optimized for driving a well-defined load impedance. As a solution, switchable matching networks are used in automatic antenna tuners to match the antenna impedance to (about) the desired PA load impedance. This paper presents a theoretical treaty of the minimum number of required states for switchable matching networks to achieve sufficient matching from a certain load VSWR to a sufficiently low input VSWR. First for an arbitrary passive lossless switchable matching network, the mathematical minimum required number of states as a function of the required input VSWR and of the required load VSWR is derived. Several variants are analyzed and benchmarked: single-stage one-ring configuration, single-stage two-ring configuration, two-stage one-ring configuration and three-stage one-ring configuration showing that single-ring configurations are optimum. An extension towards the required number of states for lossy matching networks is also provided

Reconfigurable Bulk Acoustic Wave Resonators and Filters Employing Electric-field-induced Piezoelectricity and Negative Piezoelectricity for 5G

The ever-expanding wireless communications and sensing are influencing every aspect of human life. With the persistent demand for higher data capacity and recent advancements in wireless technologies, the design of current radio frequency front-end circuitry in communication devices calls for transformative changes. Frequency band proliferation is the biggest contributor to the added RF front-ends complexity in the design of future radios. To operate at various frequency bands, a complex combination of switches and filters is used in mobile devices, and the number of these frequency selective components in each device is expected to exceed 100 with the advent of 5th generation (5G) communication networks. Acoustic wave filters based on piezoelectric materials are the primary technologies employed in current communication systems, including mobile phones. Alternatively, the integration of multifunctional ferroelectric materials into reconfigurable frequency selective components promises reduced complexity, diminished size, and high performance for future radios, enabling them to support 5G wireless technologies and beyond. A promising reconfigurable bulk acoustic wave technology, employing electric-field-induced piezoelectricity and negative piezoelectricity in ferroelectrics, is presented in this dissertation. Successful implementation of ferroelectric filters would eliminate the need for external switcheplexers in the RF front-ends and reduce the number of required filters, leading to a significant reduction in size, cost, and complexity. Contributions of this work are categorized into three major parts. In the first part, an intrinsically switchable thin film bulk acoustic wave resonator (FBAR) based on ferroelectric BST with the highest figure of merit (i.e., Q_m×K_t^2) in the literature is presented. The BST FBARs are then employed to design intrinsically switchable filters with the lowest insertion loss to date. Such filters combine filtering and switching functionalities onto a single device, eliminating the need for external switches in RF front-ends. The second part of this work focuses on the development of frequency and bandwidth reconfigurable filters based on BST FBARs. The first switchless acoustic wave filter bank is presented in chapter 3, demonstrating the capability of BST FBARs in simplifying future agile radios. Next, a novel bandwidth reconfigurable filter based on BST FBARs is introduced in chapter 4, where the idea is experimentally validated with multiple design examples. Finally, through rigorous mathematical analysis and experimental validation, it has been demonstrated that a dynamic ‘non-uniform piezoelectric coefficient’ created within a composite structure made up of multi-layers of ferroelectrics allows the selective excitation of different mechanical Eigenmodes with a constant electromechanical coupling coefficient. Such technology overcomes the fundamental limitations associated with the electromechanical coupling coefficient of harmonic resonances in bulk acoustic wave resonators. To create ‘non-uniform piezoelectric coefficients’ in such structures, ferroelectrics’ electric-field-induced piezoelectricity and negative piezoelectricity has been exploited. This innovative technology provides a fundamentally new approach and a framework for synthesizing programmable frequency selective components, which leads to transformative advances in wireless systems’ front-end architecture. As part of the future direction, it is suggested that the multilayer structure presented in this section to be further studies as part of a new acoustic wave resonator design, which: (a) is capable of operation at a wide frequency range up to mm-wave frequencies designated for 5G (b). Such a structure has the potential to overcome the fundamental limitation of acoustic resonator’s ever-decreasing electromechanical coupling factors (Kt2) as their frequency of operation increases.PHDElectrical EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/163011/1/milad_1.pd

Tunable and Switchable Coupling Between Two Superconducting Resonators

We realize a device allowing for tunable and switchable coupling between two superconducting resonators mediated by an artificial atom. For the latter, we utilize a persistent current flux qubit. We characterize the tunable and switchable coupling in frequency and time domain and find that the coupling between the relevant modes can be varied in a controlled way. Specifically, the coupling can be tuned by adjusting the flux through the qubit loop or by saturating the qubit. Our time domain measurements allow us to find parameter regimes for optimal switch performance with respect to qubit drive power and the dynamic range of the resonator input power

Communications techniques and equipment: A compilation

This Compilation is devoted to equipment and techniques in the field of communications. It contains three sections. One section is on telemetry, including articles on radar and antennas. The second section describes techniques and equipment for coding and handling data. The third and final section includes descriptions of amplifiers, receivers, and other communications subsystems

Chiral Surface Waves for Enhanced Circular Dichroism

We present a novel chiral sensing platform that combines a one-dimensional photonic crystal design with a birefringent surface defect. The platform sustains simultaneous transverse electric and transverse magnetic surface modes, which are exploited to generate chiral surface waves. The present design provides homogeneous and superchiral fields of both handednesses over arbitrarily large areas in a wide spectral range, resulting in the enhancement of the circular dichroism signal by two orders of magnitude, thus paving the road toward the successful combination of surface-enhanced spectroscopies and electromagnetic superchirality.Comment: Added references. Corrected typos. Included new design for broadband chiral surface wave

Four-element phased-array beamformers and a self-interference canceling full-duplex transciver in 130-nm SiGe for 5G applications at 26 GHz

This thesis is on the design of radio-frequency (RF) integrated front-end circuits for next generation 5G communication systems. The demand for higher data rates and lower latency in 5G networks can only be met using several new technologies including, but not limited to, mm-waves, massive-MIMO, and full-duplex. Use of mm-waves provides more bandwidth that is necessary for high data rates at the cost of increased attenuation in air. Massive-MIMO arrays are required to compensate for this increased path loss by providing beam steering and array gain. Furthermore, full duplex operation is desirable for improved spectrum efficiency and reduced latency. The difficulty of full duplex operation is the self-interference (SI) between transmit (TX) and receive (RX) paths. Conventional methods to suppress this interference utilize either bulky circulators, isolators, couplers or two separate antennas. These methods are not suitable for fully-integrated full-duplex massive-MIMO arrays. This thesis presents circuit and system level solutions to the issues summarized above, in the form of SiGe integrated circuits for 5G applications at 26 GHz. First, a full-duplex RF front-end architecture is proposed that is scalable to massive-MIMO arrays. It is based on blind, RF self-interference cancellation that is applicable to single/shared antenna front-ends. A high resolution RF vector modulator is developed, which is the key building block that empowers the full-duplex frontend architecture by achieving better than state-of-the-art 10-b monotonic phase control. This vector modulator is combined with linear-in-dB variable gain amplifiers and attenuators to realize a precision self-interference cancellation circuitry. Further, adaptive control of this SI canceler is made possible by including an on-chip low-power IQ downconverter. It correlates copies of transmitted and received signals and provides baseband/dc outputs that can be used to adaptively control the SI canceler. The solution comes at the cost of minimal additional circuitry, yet significantly eases linearity requirements of critical receiver blocks at RF/IF such as mixers and ADCs. Second, to complement the proposed full-duplex front-end architecture and to provide a more complete solution, high-performance beamformer ICs with 5-/6- b phase and 3-/4-b amplitude control capabilities are designed. Single-channel, separate transmitter and receiver beamformers are implemented targeting massive- MIMO mode of operation, and their four-channel versions are developed for phasedarray communication systems. Better than state-of-the-art noise performance is obtained in the RX beamformer channel, with a full-channel noise figure of 3.3 d

Counting Perfect Matchings and the Switch Chain

We examine the problem of exactly or approximately counting all perfect matchings in hereditary classes of nonbipartite graphs. In particular, we consider the switch Markov chain of Diaconis, Graham, and Holmes. We determine the largest hereditary class for which the chain is ergodic, and define a large new hereditary class of graphs for which it is rapidly mixing. We go on to show that the chain has exponential mixing time for a slightly larger class. We also examine the question of ergodicity of the switch chain in an arbitrary graph. Finally, we give exact counting algorithms for three classes