Single-RF spatial modulation requires single-carrier transmission: frequency-domain turbo equalization for dispersive channels

In this paper, we propose a broadband single-carrier (SC) spatial-modulation (SM) based multiple-input multipleoutput (MIMO) architecture relying on a soft-decision (SoD) frequency-domain equalization (FDE) receiver. We demonstrate that conventional orthogonal frequency-division multiplexing (OFDM)-based broadband transmissions are not readily suitable for the single–radio frequency (RF) assisted SM-MIMO schemes, since this scheme does not exhibit any substantial performance advantage over single-antenna transmissions. To circumvent this limitation, a low-complexity soft-decision (SoD) FDE algorithm based on the minimum mean-square error (MMSE) criterion is invoked for our broadband SC-based SM-MIMO scheme, which is capable of operating in a strongly dispersive channel having a long channel impulse response (CIR) at a moderate decoding complexity. Furthermore, our SoD FDE attains a near-capacity performance with the aid of a three-stage concatenated SC-based SM architecture

Near-Capacity Turbo Coded Soft-decision Aided DAPSK/Star-QAM for Amplify-and-Forward based Cooperative Communications

Multilevel Differential Amplitude and Phase-Shift Keying (DAPSK) schemes do not require any channel estimation, which results in low complexity. In this treatise we derive the soft-output probability formulas required for a soft-decision based demodulation of high-order DAPSK, in order to facilitate iterative detection by exchanging extrinsic information with an outer Turbo Code (TC). Furthermore, when the TC block size is increased, the system operates closer to the channel capacity. Compared to the identical-throughput TC assisted 64-ary Differential Phase-Shift Keying (64-DPSK) scheme, the 4-ring based TC assisted 64-ary DAPSK arrangement has a power-efficiency improvement of 2.3 dB at a bit error rate (BER) of 10-5 . Furthermore, when the TC block size is increased, the system operates closer to the channel capacity. More specifically, when using a TC block length of 400 modulated symbols, the 64 DAPSK (4, 16) scheme is 7.56 dB away from its capacity curve, while it had a reduced gap as low as 2.25 dB, when using a longer TC block length of 40 000 modulated symbols. Finally, as a novel application example, the soft-decision M-DAPSK scheme was incorporated into an Amplify-and-Forward (AF) based cooperative communication system, which attains another 4.5 dB SNR improvement for a TC block length of 40 000 modulated symbols

Design guidelines for spatial modulation

A new class of low-complexity, yet energyefficient Multiple-Input Multiple-Output (MIMO) transmission techniques, namely the family of Spatial Modulation (SM) aided MIMOs (SM-MIMO) has emerged. These systems are capable of exploiting the spatial dimensions (i.e. the antenna indices) as an additional dimension invoked for transmitting information, apart from the traditional Amplitude and Phase Modulation (APM). SM is capable of efficiently operating in diverse MIMO configurations in the context of future communication systems. It constitutes a promising transmission candidate for large-scale MIMO design and for the indoor optical wireless communication whilst relying on a single-Radio Frequency (RF) chain. Moreover, SM may also be viewed as an entirely new hybrid modulation scheme, which is still in its infancy. This paper aims for providing a general survey of the SM design framework as well as of its intrinsic limits. In particular, we focus our attention on the associated transceiver design, on spatial constellation optimization, on link adaptation techniques, on distributed/ cooperative protocol design issues, and on their meritorious variants

The Impact of Hard-Decision Detection on the Energy Efficiency of Phase and Frequency Modulation

The central design challenge in next generation wireless systems is to have these systems operate at high bandwidths and provide high data rates while being cognizant of the energy consumption levels especially in mobile applications. Since communicating at very high data rates prohibits obtaining high bit resolutions from the analog-to-digital (A/D) converters, analysis of the energy efficiency under the assumption of hard-decision detection is called for to accurately predict the performance levels. In this paper, transmission over the additive white Gaussian noise (AWGN) channel, and coherent and noncoherent fading channels is considered, and the impact of hard-decision detection on the energy efficiency of phase and frequency modulations is investigated. Energy efficiency is analyzed by studying the capacity of these modulation schemes and the energy required to send one bit of information reliably in the low signal-to-noise ratio (SNR) regime. The capacity of hard-decision-detected phase and frequency modulations is characterized at low SNR levels through closed-form expressions for the first and second derivatives of the capacity at zero SNR. Subsequently, bit energy requirements in the low-SNR regime are identified. The increases in the bit energy incurred by hard-decision detection and channel fading are quantified. Moreover, practical design guidelines for the selection of the constellation size are drawn from the analysis of the spectral efficiency--bit energy tradeoff.Comment: To appear in the IEEE Transactions on Wireless Communication

Successive-relaying-aided decode-and-forward coherent versus noncoherent cooperative multicarrier space–time shift keying

Abstract—Successive-relaying-aided (SR) cooperative multi-carrier (MC) space–time shift keying (STSK) is proposed for frequency-selective channels. We invoke SR to mitigate the typical 50% throughput loss of conventional half-duplex relaying schemes and MC code-division multiple access (MC-CDMA) to circumvent the dispersive effects of wireless channels and to reduce the SR-induced interference. The distributed relay terminals form two virtual antenna arrays (VAAs), and the source node (SN) successively transmits frequency-domain (FD) spread signals to one of the VAAs, in addition to directly transmitting to the destination node (DN). The constituent relay nodes (RNs) of each VAA activate cyclic-redundancy-checking-based (CRC) selective decode-and-forward (DF) relaying. The DN can jointly detect the signals received via the SN-to-DN and VAA-to-DN links using a low-complexity single-stream-based joint maximum-likelihood (ML) detector. We also propose a differentially encoded cooperative MC-CDMA STSK scheme to facilitate communications over hostile dispersive channels without requiring channel estimation (CE). Dispensing with CE is important since the relays cannot be expected to altruistically estimate the SN-to-RN links for simply supporting the source. Furthermore, we propose soft-decision-aided serially concatenated recursive systematic convolutional (RSC) and unity-rate-coded (URC) cooperative MC STSK and investigate its performance in both coherent and noncoherent scenarios

Short-range ultrasonic communications in air using quadrature modulation

A study has been undertaken of ultrasonic communications methods in air, using a quadrature modulation method. Simulations were first performed to establish the likely performance of quadrature phase shift keying over the limited bandwidth available in an ultrasonic system. Quadrature phase shift keying modulation was then implemented within an experimental communication system, using capacitive ultrasonic sources and receivers. The results show that such a system is feasible in principle for communications over distances of several meters, using frequencies in the 200 to 400 kHz range