Real-time spatial modeling to detect and track resources on construction sites

For more than 10 years the U.S. construction industry has experienced over 1,000 fatalities annually. Many fatalities may have been prevented had the individuals and equipment involved been more aware of and alert to the physical state of the environment around them. Awareness may be improved by automatic 3D (three-dimensional) sensing and modeling of the job site environment in real-time. Existing 3D modeling approaches based on range scanning techniques are capable of modeling static objects only, and thus cannot model in real-time dynamic objects in an environment comprised of moving humans, equipment, and materials. Emerging prototype 3D video range cameras offer another alternative by facilitating affordable, wide field of view, automated static and dynamic object detection and tracking at frame rates better than 1Hz (real-time). This dissertation presents an imperical work and methodology to rapidly create a spatial model of construction sites and in particular to detect, model, and track the position, dimension, direction, and velocity of static and moving project resources in real-time, based on range data obtained from a three-dimensional video range camera in a static or moving position. Existing construction site 3D modeling approaches based on optical range sensing technologies (laser scanners, rangefinders, etc.) and 3D modeling approaches (dense, sparse, etc.) that offered potential solutions for this research are reviewed. The choice of an emerging sensing tool and preliminary experiments with this prototype sensing technology are discussed. These findings led to the development of a range data processing algorithm based on three-dimensional occupancy grids which is demonstrated in detail. Testing and validation of the proposed algorithms have been conducted to quantify the performance of sensor and algorithm through extensive experimentation involving static and moving objects. Experiments in indoor laboratory and outdoor construction environments have been conducted with construction resources such as humans, equipment, materials, or structures to verify the accuracy of the occupancy grid modeling approach. Results show that modeling objects and measuring their position, dimension, direction, and speed had an accuracy level compatible to the requirements of active safety features for construction. Results demonstrate that video rate 3D data acquisition and analysis of construction environments can support effective detection, tracking, and convex hull modeling of objects. Exploiting rapidly generated three-dimensional models for improved visualization, communications, and process control has inherent value, broad application, and potential impact, e.g. as-built vs. as-planned comparison, condition assessment, maintenance, operations, and construction activities control. In combination with effective management practices, this sensing approach has the potential to assist equipment operators to avoid incidents that result in reduce human injury, death, or collateral damage on construction sites.Civil, Architectural, and Environmental Engineerin

A Study on Recent Developments and Issues with Obstacle Detection Systems for Automated Vehicles

This paper reviews current developments and discusses some critical issues with obstacle detection systems for automated vehicles. The concept of autonomous driving is the driver towards future mobility. Obstacle detection systems play a crucial role in implementing and deploying autonomous driving on our roads and city streets. The current review looks at technology and existing systems for obstacle detection. Specifically, we look at the performance of LIDAR, RADAR, vision cameras, ultrasonic sensors, and IR and review their capabilities and behaviour in a number of different situations: during daytime, at night, in extreme weather conditions, in urban areas, in the presence of smooths surfaces, in situations where emergency service vehicles need to be detected and recognised, and in situations where potholes need to be observed and measured. It is suggested that combining different technologies for obstacle detection gives a more accurate representation of the driving environment. In particular, when looking at technological solutions for obstacle detection in extreme weather conditions (rain, snow, fog), and in some specific situations in urban areas (shadows, reflections, potholes, insufficient illumination), although already quite advanced, the current developments appear to be not sophisticated enough to guarantee 100% precision and accuracy, hence further valiant effort is needed

Human and Robotic Mission to Small Bodies: Mapping, Planning and Exploration

This study investigates the requirements, performs a gap analysis and makes a set of recommendations for mapping products and exploration tools required to support operations and scientific discovery for near- term and future NASA missions to small bodies. The mapping products and their requirements are based on the analysis of current mission scenarios (rendezvous, docking, and sample return) and recommendations made by the NEA Users Team (NUT) in the framework of human exploration. The mapping products that sat- isfy operational, scienti c, and public outreach goals include topography, images, albedo, gravity, mass, density, subsurface radar, mineralogical and thermal maps. The gap analysis points to a need for incremental generation of mapping products from low (flyby) to high-resolution data needed for anchoring and docking, real-time spatial data processing for hazard avoidance and astronaut or robot localization in low gravity, high dynamic environments, and motivates a standard for coordinate reference systems capable of describing irregular body shapes. Another aspect investigated in this study is the set of requirements and the gap analysis for exploration tools that support visualization and simulation of operational conditions including soil interactions, environment dynamics, and communications coverage. Building robust, usable data sets and visualisation/simulation tools is the best way for mission designers and simulators to make correct decisions for future missions. In the near term, it is the most useful way to begin building capabilities for small body exploration without needing to commit to specific mission architectures