Unmanned Aerial Systems for Wildland and Forest Fires

Wildfires represent an important natural risk causing economic losses, human death and important environmental damage. In recent years, we witness an increase in fire intensity and frequency. Research has been conducted towards the development of dedicated solutions for wildland and forest fire assistance and fighting. Systems were proposed for the remote detection and tracking of fires. These systems have shown improvements in the area of efficient data collection and fire characterization within small scale environments. However, wildfires cover large areas making some of the proposed ground-based systems unsuitable for optimal coverage. To tackle this limitation, Unmanned Aerial Systems (UAS) were proposed. UAS have proven to be useful due to their maneuverability, allowing for the implementation of remote sensing, allocation strategies and task planning. They can provide a low-cost alternative for the prevention, detection and real-time support of firefighting. In this paper we review previous work related to the use of UAS in wildfires. Onboard sensor instruments, fire perception algorithms and coordination strategies are considered. In addition, we present some of the recent frameworks proposing the use of both aerial vehicles and Unmanned Ground Vehicles (UV) for a more efficient wildland firefighting strategy at a larger scale.Comment: A recent published version of this paper is available at: https://doi.org/10.3390/drones501001

Flame filtering and perimeter localization of wildfires using aerial thermal imagery

Airborne thermal infrared (TIR) imaging systems are being increasingly used for wild fire tactical monitoring since they show important advantages over spaceborne platforms and visible sensors while becoming much more affordable and much lighter than multispectral cameras. However, the analysis of aerial TIR images entails a number of difficulties which have thus far prevented monitoring tasks from being totally automated. One of these issues that needs to be addressed is the appearance of flame projections during the geo-correction of off-nadir images. Filtering these flames is essential in order to accurately estimate the geographical location of the fuel burning interface. Therefore, we present a methodology which allows the automatic localisation of the active fire contour free of flame projections. The actively burning area is detected in TIR georeferenced images through a combination of intensity thresholding techniques, morphological processing and active contours. Subsequently, flame projections are filtered out by the temporal frequency analysis of the appropriate contour descriptors. The proposed algorithm was tested on footages acquired during three large-scale field experimental burns. Results suggest this methodology may be suitable to automatise the acquisition of quantitative data about the fire evolution. As future work, a revision of the low-pass filter implemented for the temporal analysis (currently a median filter) was recommended. The availability of up-to-date information about the fire state would improve situational awareness during an emergency response and may be used to calibrate data-driven simulators capable of emitting short-term accurate forecasts of the subsequent fire evolution.Postprint (author's final draft

Automated location of active fire perimeters in aerial infrared imaging using unsupervised edge detectors

A variety of remote sensing techniques have been applied to forest fires. However, there is at present no system capable of monitoring an active fire precisely in a totally automated manner. Spaceborne sensors show too coarse spatio-temporal resolutions and all previous studies that extracted fire properties from infrared aerial imagery incorporated manual tasks within the image processing workflow. As a contribution to this topic, this paper presents an algorithm to automatically locate the fuel burning interface of an active wildfire in georeferenced aerial thermal infrared (TIR) imagery. An unsupervised edge detector, built upon the Canny method, was accompanied by the necessary modules for the extraction of line coordinates and the location of the total burned perimeter. The system was validated in different scenarios ranging from laboratory tests to large-scale experimental burns performed under extreme weather conditions. Output accuracy was computed through three common similarity indices and proved acceptable. Computing times were below 1¿s per image on average. The produced information was used to measure the temporal evolution of the fire perimeter and automatically generate rate of spread (ROS) fields. Information products were easily exported to standard Geographic Information Systems (GIS), such as GoogleEarth and QGIS. Therefore, this work contributes towards the development of an affordable and totally automated system for operational wildfire surveillance.Peer ReviewedPostprint (author's final draft

Beyond Measurement: {E}xtracting Vegetation Height from High Resolution Imagery with Deep Learning

Measuring and monitoring the height of vegetation provides important insights into forest age and habitat quality. These are essential for the accuracy of applications that are highly reliant on up-to-date and accurate vegetation data. Current vegetation sensing practices involve ground survey, photogrammetry, synthetic aperture radar (SAR), and airborne light detection and ranging sensors (LiDAR). While these methods provide high resolution and accuracy, their hardware and collection effort prohibits highly recurrent and widespread collection. In response to the limitations of current methods, we designed Y-NET, a novel deep learning model to generate high resolution models of vegetation from highly recurrent multispectral aerial imagery and elevation data. Y-NET’s architecture uses convolutional layers to learn correlations between different input features and vegetation height, generating an accurate vegetation surface model (VSM) at 1×1 m resolution. We evaluated Y-NET on 235 km2 of the East San Francisco Bay Area and find that Y-NET achieves low error from LiDAR when tested on new locations. Y-NET also achieves an R2 of 0.83 and can effectively model complex vegetation through side-by-side visual comparisons. Furthermore, we show that Y-NET is able to identify instances of vegetation growth and mitigation by comparing aerial imagery and LiDAR collected at different times

High-resolution SAR images for fire susceptibility estimation in urban forestry

We present an adaptive system for the automatic assessment of both physical and anthropic fire impact factors on periurban forestries. The aim is to provide an integrated methodology exploiting a complex data structure built upon a multi resolution grid gathering historical land exploitation and meteorological data, records of human habits together with suitably segmented and interpreted high resolution X-SAR images, and several other information sources. The contribution of the model and its novelty rely mainly on the definition of a learning schema lifting different factors and aspects of fire causes, including physical, social and behavioural ones, to the design of a fire susceptibility map, of a specific urban forestry. The outcome is an integrated geospatial database providing an infrastructure that merges cartography, heterogeneous data and complex analysis, in so establishing a digital environment where users and tools are interactively connected in an efficient and flexible way

Airborne and Terrestrial Laser Scanning Data for the Assessment of Standing and Lying Deadwood: Current Situation and New Perspectives

LiDAR technology is finding uses in the forest sector, not only for surveys in producing forests but also as a tool to gain a deeper understanding of the importance of the three-dimensional component of forest environments. Developments of platforms and sensors in the last decades have highlighted the capacity of this technology to catch relevant details, even at finer scales. This drives its usage towards more ecological topics and applications for forest management. In recent years, nature protection policies have been focusing on deadwood as a key element for the health of forest ecosystems and wide-scale assessments are necessary for the planning process on a landscape scale. Initial studies showed promising results in the identification of bigger deadwood components (e.g., snags, logs, stumps), employing data not specifically collected for the purpose. Nevertheless, many efforts should still be made to transfer the available methodologies to an operational level. Newly available platforms (e.g., Mobile Laser Scanner) and sensors (e.g., Multispectral Laser Scanner) might provide new opportunities for this field of study in the near future

An Automatic Statistical Segmentation Algorithm for Extraction of Fire and Smoke Regions

Estimation of the extent and spread of wildland fires is an important application of high spatial resolution multispectral images. This work addresses a fuzzy segmentation algorithm to map fire extent, active fire front, hot burn scar, and smoke regions based on a statistical model. The fuzzy results are useful data sources for integrated fire behavior and propagation models built using Dynamic Data Driven Applications Systems (DDDAS) concepts that use data assimilation techniques which require error estimates or probabilities for the data parameters. The Hidden Markov Random Field (HMRF) model has been used widely in image segmentation, but it is assumed that each pixel has a particular class label belonging to a prescribed finite set. The mixed pixel problem can be addressed by modeling the fuzzy membership process as a continuous Multivariate Gaussian Markov Random Field. Techniques for estimating the class membership and model parameters are discussed. Experimental results obtained by applying this technique to two Airborne Visible/Infrared Imaging Spectrometer (AVIRIS) images show that the proposed methodology is robust with regard to noise and variation in fire characteristics as well as background. The segmentation results of our algorithm are compared with the results of a K-means algorithm, an Expectation Maximization (EM) algorithm (which is very similar to the Fuzzy C-Means Clustering algorithm with entropy regularization), and an MRF-MAP algorithm. Our fuzzy algorithm achieves more consistent segmentation results than the comparison algorithms for these test images with the added advantage of simultaneously providing a proportion or error map needed for the data assimilation problem