Numerical Simulation and Design Assessment of Limited Feedback Channel Estimation in Massive MIMO Communication System

The Internet of Things (IoT) has attracted a great deal of interest in various fields including governments, business, academia as an evolving technology that aims to make anything connected, communicate, and exchange of data. The massive connectivity, stringent energy restrictions, and ultra-reliable transmission requirements are also defined as the most distinctive features of IoT. This feature is a natural IoT supporting technology, as massive multiple input (MIMO) inputs will result in enormous spectral/energy efficiency gains and boost IoT transmission reliability dramatically through a coherent processing of the large-scale antenna array signals. However, the processing is coherent and relies on accurate estimation of channel state information (CSI) between BS and users. Massive multiple input (MIMO) is a powerous support technology that fulfils the Internet of Things' (IoT) energy/spectral performance and reliability needs. However, the benefit of MIMOs is dependent on the availability of CSIs. This research proposes an adaptive sparse channel calculation with limited feedback to estimate accurate and prompt CSIs for large multi-intimate-output systems based on Duplex Frequency Division (DFD) systems. The minimal retro-feedback scheme must retrofit the burden of the base station antennas in a linear proportion. This work offers a narrow feedback algorithm to elevate the burden by means of a MIMO double-way representation (DD) channel using uniform dictionaries linked to the arrival angle and start angle (AoA) (AoD). Although the number of transmission antennas in the BS is high, the algorithms offer an acceptable channel estimation accuracy using a limited number of feedback bits, making it suitable for 5G massively MIMO. The results of the simulation indicate the output limit can be achieved with the proposed algorithm

Rate Splitting for MIMO Wireless Networks: A Promising PHY-Layer Strategy for LTE Evolution

MIMO processing plays a central part towards the recent increase in spectral and energy efficiencies of wireless networks. MIMO has grown beyond the original point-to-point channel and nowadays refers to a diverse range of centralized and distributed deployments. The fundamental bottleneck towards enormous spectral and energy efficiency benefits in multiuser MIMO networks lies in a huge demand for accurate channel state information at the transmitter (CSIT). This has become increasingly difficult to satisfy due to the increasing number of antennas and access points in next generation wireless networks relying on dense heterogeneous networks and transmitters equipped with a large number of antennas. CSIT inaccuracy results in a multi-user interference problem that is the primary bottleneck of MIMO wireless networks. Looking backward, the problem has been to strive to apply techniques designed for perfect CSIT to scenarios with imperfect CSIT. In this paper, we depart from this conventional approach and introduce the readers to a promising strategy based on rate-splitting. Rate-splitting relies on the transmission of common and private messages and is shown to provide significant benefits in terms of spectral and energy efficiencies, reliability and CSI feedback overhead reduction over conventional strategies used in LTE-A and exclusively relying on private message transmissions. Open problems, impact on standard specifications and operational challenges are also discussed.Comment: accepted to IEEE Communication Magazine, special issue on LTE Evolutio

Massive MIMO 시스템을 위한 채널 추정 및 피드백 기법

학위논문 (박사)-- 서울대학교 대학원 : 전기·컴퓨터공학부, 2017. 2. 이정우.To meet the demand of high throughput in next generation wireless systems, various directions for physical layer evolution are being explored. Massive multiple-input multiple-output (MIMO) systems, characterized by a large number of antennas at the transmitter, are expected to become a key enabler for spectral efficiency improvement. In massive MIMO systems, thanks to the orthogonality between different users' channels, high spectral and energy efficiency can be achieved through simple signal processing techniques. However, to get such advantages, accurate channel state information (CSI) needs to be available, and acquiring CSI in massive MIMO systems is challenging due to the increased channel dimension. In frequency division duplexing (FDD) systems, where CSI at the transmitter is achieved through downlink training and uplink feedback, the overhead for the training and feedback increases proportionally to the number of antennas, and the resource for data transmission becomes scarce in massive MIMO systems. In time division duplexing (TDD) systems, where the channel reciprocity holds and the downlink CSI can be obtained through uplink training, pilot contamination due to correlated pilots becomes a performance bottleneck when the number of antennas increases. In this dissertation, I propose efficient CSI acquisition techniques for various massive MIMO systems. First, I develop a downlink training technique for FDD massive MIMO systems, which estimates the downlink channel with small overhead. To this end, compressed sensing tools are utilized, and the training overhead can be highly reduced by exploiting the previous channel information. Next, a limited feedback scheme is developed for FDD massive MIMO systems. The proposed scheme reduces the feedback overhead using a dimension reduction technique that exploits spatial and temporal correlation of the channel. Lastly, I analyze the effect of pilot contamination, which has been regarded as a performance bottleneck in multi-cell massive MIMO systems, and propose two uplink training strategies. An iterative pilot design scheme is developed for small networks, and a scalable training framework is also proposed for networks with many cells.1 Introduction 1 1.1 Massive MIMO 1 1.2 CSI Acquisition in Massive MIMO Systems 3 1.3 Contributions and Organization 6 1.4 Notations 7 2 Compressed Sensing-Aided Downlink Training 9 2.1 Introduction 10 2.2 System Model 13 2.2.1 Channel Model 13 2.2.2 Downlink Channel Estimation 16 2.3 CS-Aided Channel Training 19 2.3.1 Training Sequence Design 20 2.3.2 Channel Estimation 21 2.3.3 Estimation Error 23 2.4 Discussions 26 2.4.1 Design of Measurement Matrix 26 2.4.2 Extension to MIMO Systems 27 2.4.3 Comparison to CS with Partial Support Information 28 2.5 Simulation Results 29 2.6 Conclusion 37 3 Projection-Based Differential Feedback 39 3.1 Introduction 40 3.2 System Model 44 3.2.1 Multi-User Beamforming with Limited Feedback 45 3.2.2 Massive MIMO Channel 47 3.3 Projection-Based Differential Feedback 48 3.3.1 Projection-Based Differential Feedback Framework 48 3.3.2 Projection for PBDF Framework 51 3.3.3 Efficient Algorithm 57 3.4 Discussions 58 3.4.1 Projection with Imperfect CSIR 58 3.4.2 Acquisition of Channel Statistics 61 3.5 Simulation Results 62 3.6 Conclusion 69 4 Mitigating Pilot Contamination via Pilot Design 71 4.1 Introduction 72 4.2 System Model 73 4.2.1 Multi-cell Massive MIMO Systems 74 4.2.2 Uplink Channel Training 75 4.2.3 Data Transmission 77 4.3 Iterative Pilot Design Algorithm 78 4.3.1 Algorithm 79 4.3.2 Proof of Convergence 81 4.4 Generalized Pilot Reuse 81 4.4.1 Concept of Pilot Reuse Schemes 81 4.4.2 Pilot Design based on Grassmannian Subspace Packing 82 4.5 Simulation Results 85 4.5.1 Iterative Pilot Design 85 4.5.2 Generalized Pilot Reuse 87 4.6 Conclusion 89 5 Conclusion 91 5.1 Summary 91 5.2 Future Directions 93 Bibliography 96 Abstract (In Korean) 109Docto

FDD Massive MIMO Based on Efficient Downlink Channel Reconstruction

Massive multiple-input multiple-output (MIMO) systems deploying a large number of antennas at the base station considerably increase the spectrum efficiency by serving multiple users simultaneously without causing severe interference. However, the advantage relies on the availability of the downlink channel state information (CSI) of multiple users, which is still a challenge in frequency-division-duplex transmission systems. This paper aims to solve this problem by developing a full transceiver framework that includes downlink channel training (or estimation), CSI feedback, and channel reconstruction schemes. Our framework provides accurate reconstruction results for multiple users with small amounts of training and feedback overhead. Specifically, we first develop an enhanced Newtonized orthogonal matching pursuit (eNOMP) algorithm to extract the frequency-independent parameters (i.e., downtilts, azimuths, and delays) from the uplink. Then, by leveraging the information from these frequency-independent parameters, we develop an efficient downlink training scheme to estimate the downlink channel gains for multiple users. This training scheme offers an acceptable estimation error rate of the gains with a limited pilot amount. Numerical results verify the precision of the eNOMP algorithm and demonstrate that the sum-rate performance of the system using the reconstructed downlink channel can approach that of the system using perfect CSI