Splice: A Standardized Peripheral Logic and Interface Creation Engine

Recent advancements in FPGA technology have allowed manufacturers to place general-purpose processors alongside user-configurable logic gates on a single chip. At first glance, these integrated devices would seem to be the ideal deployment platform for hardware-software co-designed systems, but some issues, such as incompatibility across vendors and confusion over which bus interfaces to support, have impeded adoption of these platforms. This thesis describes the design and operation of Splice, a software-based code generation tool intended to address these types of issues by providing a bus-independent structure that allows end-users to easily integrate their customized peripheral logic into embedded systems. To quantify the benefits of this approach, a comparison of a number of Splice-generated interfaces to functionally identical hand-coded mechanisms is provided in the context of a real-world use case scenario

Splice: A Standardized Peripheral Logic and Interface Creation Engine, Master\u27s Thesis, May 2007

Recent advancements in FPGA technology have allowed manufacturers to place general-purpose processors alongside user-configurable logic gates on a single chip. At first glance, these integrated devices would seem to be the ideal deployment platform for hardware-software co-designed systems, but some issues, such as incompatibility across vendors and confusion over which bus interfaces to support, have impeded adoption of these platforms. This thesis describes the design and operation of Splice, a software-based code generation tool intended to address these types of issues by providing a bus-independent structure that allows end-users to easily integrate their customized peripheral logic into embedded systems. To quantify the benefits of this approach, a comparison of a number of Splice-generated interfaces to functionally identical hand-coded mechanisms is provided in the context of a real-world use case scenario

Design methodology and productivity improvement in high speed VLSI circuits

2017 Spring.Includes bibliographical references.To view the abstract, please see the full text of the document

Doctor of Philosophy

dissertationThe design of integrated circuit (IC) requires an exhaustive verification and a thorough test mechanism to ensure the functionality and robustness of the circuit. This dissertation employs the theory of relative timing that has the advantage of enabling designers to create designs that have significant power and performance over traditional clocked designs. Research has been carried out to enable the relative timing approach to be supported by commercial electronic design automation (EDA) tools. This allows asynchronous and sequential designs to be designed using commercial cad tools. However, two very significant holes in the flow exist: the lack of support for timing verification and manufacturing test. Relative timing (RT) utilizes circuit delay to enforce and measure event sequencing on circuit design. Asynchronous circuits can optimize power-performance product by adjusting the circuit timing. A thorough analysis on the timing characteristic of each and every timing path is required to ensure the robustness and correctness of RT designs. All timing paths have to conform to the circuit timing constraints. This dissertation addresses back-end design robustness by validating full cyclical path timing verification with static timing analysis and implementing design for testability (DFT). Circuit reliability and correctness are necessary aspects for the technology to become commercially ready. In this study, scan-chain, a commercial DFT implementation, is applied to burst-mode RT designs. In addition, a novel testing approach is developed along with scan-chain to over achieve 90% fault coverage on two fault models: stuck-at fault model and delay fault model. This work evaluates the cost of DFT and its coverage trade-off then determines the best implementation. Designs such as a 64-point fast Fourier transform (FFT) design, an I2C design, and a mixed-signal design are built to demonstrate power, area, performance advantages of the relative timing methodology and are used as a platform for developing the backend robustness. Results are verified by performing post-silicon timing validation and test. This work strengthens overall relative timed circuit flow, reliability, and testability

A Survey of Asynchronous Programming Using Coroutines in the Internet of Things and Embedded Systems

Many Internet of Things and embedded projects are event-driven, and therefore require asynchronous and concurrent programming. Current proposals for C++20 suggest that coroutines will have native language support. It is timely to survey the current use of coroutines in embedded systems development. This paper investigates existing research which uses or describes coroutines on resource-constrained platforms. The existing research is analysed with regard to: software platform, hardware platform and capacity; use cases and intended benefits; and the application programming interface design used for coroutines. A systematic mapping study was performed, to select studies published between 2007 and 2018 which contained original research into the application of coroutines on resource-constrained platforms. An initial set of 566 candidate papers were reduced to only 35 after filters were applied, revealing the following taxonomy. The C & C++ programming languages were used by 22 studies out of 35. As regards hardware, 16 studies used 8- or 16-bit processors while 13 used 32-bit processors. The four most common use cases were concurrency (17 papers), network communication (15), sensor readings (9) and data flow (7). The leading intended benefits were code style and simplicity (12 papers), scheduling (9) and efficiency (8). A wide variety of techniques have been used to implement coroutines, including native macros, additional tool chain steps, new language features and non-portable assembly language. We conclude that there is widespread demand for coroutines on resource-constrained devices. Our findings suggest that there is significant demand for a formalised, stable, well-supported implementation of coroutines in C++, designed with consideration of the special needs of resource-constrained devices, and further that such an implementation would bring benefits specific to such devices.Comment: 22 pages, 8 figures, to be published in ACM Transactions on Embedded Computing Systems (TECS

Reliable interface design for combining asynchronous and synchronous circuits

Journal ArticleAbstract: In order to successfully integrate asynchronous and synchronous designs, great care must be taken at the interface between the two types of systems. Synchronizing asynchronous inputs with a free running clock can cause well-known problems with metastability in the synchronization circuits. Stretchable clocks allow a clock cycle to expand dynamically in response to the metastability effects of sampling asynchronous inputs. We use an interface organization where the special circuitry for detecting metastability and for stretching the clock that is delivered to the synchronous part of the system is encapsulated in a Q-flop-based interface. This provides a very convenient method for interfacing mixed systems, as the interface and clock generation circuitry are isolated into one special module, and neither the asynchronous nor the synchronous system need be modified internally to accommodate the interface. This is especially important when standard synchronous components are used as there is no opportunity to modify these parts. We show that this interface module is suitable for most mixed design needs and conclude with an example

The Design and Verification of a Synchronous First-In First-Out (FIFO) Module Using System Verilog Based Universal Verification Methodology (UVM)

With the conventional directed testbench, it is highly improbably to handle verification of current complex Integrated Circuit (IC) designs, because a person has to manually create every test case. The greater the complexity of the designs, the higher the probability of bugs appearing in the code. Increasing complexity of ICs has created a necessity for performing verification on designs with an advanced, automated verification environment. Ideally this would eliminate chip re-spins, minimizing the time required to enable checking of all the design specifications, ensuring 100% functional coverage. This paper deals with the design of Synchronous FIFO using Verilog. A FIFO (First-In-First-Out) is a memory queue, which controls the data flow between two modules. It has control logic embedded with it, which efficiently manages read and write operations. It has the capability to notify the concerned modules regarding its empty status and full status to help ensure no underflow or overflow of data. This FIFO design is classified as synchronous, as clocks control the read and write operations. Both read and write operations happen simultaneously using of Dual port RAM or an array of flip-flops in the design. After designing the Synchronous FIFO, its verification is carried out using the Universal Verification Methodology (UVM). A detailed discussion about the verification plan and test results is included