Arithmetic Operations in Multi-Valued Logic

This paper presents arithmetic operations like addition, subtraction and multiplications in Modulo-4 arithmetic, and also addition, multiplication in Galois field, using multi-valued logic (MVL). Quaternary to binary and binary to quaternary converters are designed using down literal circuits. Negation in modular arithmetic is designed with only one gate. Logic design of each operation is achieved by reducing the terms using Karnaugh diagrams, keeping minimum number of gates and depth of net in to consideration. Quaternary multiplier circuit is proposed to achieve required optimization. Simulation result of each operation is shown separately using Hspice.Comment: 12 Pages, VLSICS Journal 201

ハードウェアリソースの高稼働率化に基づく細粒度多値リコンフィギャラブルVLSIアーキテクチャ

Tohoku University亀山充隆課

Power Optimization of Combinational Quaternary Logic Circuits

Design of the binary logic circuits is restricted by the need of the interconnections. Interconnections increase delay, area and energy consumption in CMOS digital circuits. A possible solution could be here at by using a bigger set of signals over the same chip area. Multiple-valued logic can decrease the average power required for level transitions and reduces the number of necessary interconnections. In this paper we design various combinational circuits using quaternary logic. Various combinational circuit such as multi valued logic full adder using unique encoding technique, quaternary encoder and quaternary multiplexer. This design is target to reduce the transistor used to implement the circuit and dropping the power dissipation. Power optimization is achieved using MTCMOS technique. Simulation has been done in Tanner 13 EDA tool on BSIM3 180 nm CMOS Technology. DOI: 10.17762/ijritcc2321-8169.15026

Multi-standard programmable baseband modulator for next generation wireless communication

Considerable research has taken place in recent times in the area of parameterization of software defined radio (SDR) architecture. Parameterization decreases the size of the software to be downloaded and also limits the hardware reconfiguration time. The present paper is based on the design and development of a programmable baseband modulator that perform the QPSK modulation schemes and as well as its other three commonly used variants to satisfy the requirement of several established 2G and 3G wireless communication standards. The proposed design has been shown to be capable of operating at a maximum data rate of 77 Mbps on Xilinx Virtex 2-Pro University field programmable gate array (FPGA) board. The pulse shaping root raised cosine (RRC) filter has been implemented using distributed arithmetic (DA) technique in the present work in order to reduce the computational complexity, and to achieve appropriate power reduction and enhanced throughput. The designed multiplier-less programmable 32-tap FIR-based RRC filter has been found to withstand a peak inter-symbol interference (ISI) distortion of -41 dB

The implementation and applications of multiple-valued logic

Multiple-Valued Logic (MVL) takes two major forms. Multiple-valued circuits can implement the logic directly by using multiple-valued signals, or the logic can be implemented indirectly with binary circuits, by using more than one binary signal to represent a single multiple-valued signal. Techniques such as carry-save addition can be viewed as indirectly implemented MVL. Both direct and indirect techniques have been shown in the past to provide advantages over conventional arithmetic and logic techniques in algorithms required widely in computing for applications such as image and signal processing. It is possible to implement basic MVL building blocks at the transistor level. However, these circuits are difficult to design due to their non binary nature. In the design stage they are more like analogue circuits than binary circuits. Current integrated circuit technologies are biased towards binary circuitry. However, in spite of this, there is potential for power and area savings from MVL circuits, especially in technologies such as BiCMOS. This thesis shows that the use of voltage mode MVL will, in general not provide bandwidth increases on circuit buses because the buses become slower as the number of signal levels increases. Current mode MVL circuits however do have potential to reduce power and area requirements of arithmetic circuitry. The design of transistor level circuits is investigated in terms of a modern production technology. A novel methodology for the design of current mode MVL circuits is developed. The methodology is based upon the novel concept of the use of non-linear current encoding of signals, providing the opportunity for the efficient design of many previously unimplemented circuits in current mode MVL. This methodology is used to design a useful set of basic MVL building blocks, and fabrication results are reported. The creation of libraries of MVL circuits is also discussed. The CORDIC algorithm for two dimensional vector rotation is examined in detail as an example for indirect MVL implementation. The algorithm is extended to a set of three dimensional vector rotators using conventional arithmetic, redundant radix four arithmetic, and Taylor's series expansions. These algorithms can be used for two dimensional vector rotations in which no scale factor corrections are needed. The new algorithms are compared in terms of basic VLSI criteria against previously reported algorithms. A pipelined version of the redundant arithmetic algorithm is floorplanned and partially laid out to give indications of wiring overheads, and layout densities. An indirectly implemented MVL algorithm such as the CORDIC algorithm described in this thesis would clearly benefit from direct implementation in MVL

A high-performance inner-product processor for real and complex numbers.

A novel, high-performance fixed-point inner-product processor based on a redundant binary number system is investigated in this dissertation. This scheme decreases the number of partial products to 50%, while achieving better speed and area performance, as well as providing pipeline extension opportunities. When modified Booth coding is used, partial products are reduced by almost 75%, thereby significantly reducing the multiplier addition depth. The design is applicable for digital signal and image processing applications that require real and/or complex numbers inner-product arithmetic, such as digital filters, correlation and convolution. This design is well suited for VLSI implementation and can also be embedded as an inner-product core inside a general purpose or DSP FPGA-based processor. Dynamic control of the computing structure permits different computations, such as a variety of inner-product real and complex number computations, parallel multiplication for real and complex numbers, and real and complex number division. The same structure can also be controlled to accept redundant binary number inputs for multiplication and inner-product computations. An improved 2's-complement to redundant binary converter is also presented

Decimal Floating-point Fused Multiply Add with Redundant Number Systems

The IEEE standard of decimal floating-point arithmetic was officially released in 2008. The new decimal floating-point (DFP) format and arithmetic can be applied to remedy the conversion error caused by representing decimal floating-point numbers in binary floating-point format and to improve the computing performance of the decimal processing in commercial and financial applications. Nowadays, many architectures and algorithms of individual arithmetic functions for decimal floating-point numbers are proposed and investigated (e.g., addition, multiplication, division, and square root). However, because of the less efficiency of representing decimal number in binary devices, the area consumption and performance of the DFP arithmetic units are not comparable with the binary counterparts. IBM proposed a binary fused multiply-add (FMA) function in the POWER series of processors in order to improve the performance of floating-point computations and to reduce the complexity of hardware design in reduced instruction set computing (RISC) systems. Such an instruction also has been approved to be suitable for efficiently implementing not only stand-alone addition and multiplication, but also division, square root, and other transcendental functions. Additionally, unconventional number systems including digit sets and encodings have displayed advantages on performance and area efficiency in many applications of computer arithmetic. In this research, by analyzing the typical binary floating-point FMA designs and the design strategy of unconventional number systems, ``a high performance decimal floating-point fused multiply-add (DFMA) with redundant internal encodings" was proposed. First, the fixed-point components inside the DFMA (i.e., addition and multiplication) were studied and investigated as the basis of the FMA architecture. The specific number systems were also applied to improve the basic decimal fixed-point arithmetic. The superiority of redundant number systems in stand-alone decimal fixed-point addition and multiplication has been proved by the synthesis results. Afterwards, a new DFMA architecture which exploits the specific redundant internal operands was proposed. Overall, the specific number system improved, not only the efficiency of the fixed-point addition and multiplication inside the FMA, but also the architecture and algorithms to build up the FMA itself. The functional division, square root, reciprocal, reciprocal square root, and many other functions, which exploit the Newton's or other similar methods, can benefit from the proposed DFMA architecture. With few necessary on-chip memory devices (e.g., Look-up tables) or even only software routines, these functions can be implemented on the basis of the hardwired FMA function. Therefore, the proposed DFMA can be implemented on chip solely as a key component to reduce the hardware cost. Additionally, our research on the decimal arithmetic with unconventional number systems expands the way of performing other high-performance decimal arithmetic (e.g., stand-alone division and square root) upon the basic binary devices (i.e., AND gate, OR gate, and binary full adder). The proposed techniques are also expected to be helpful to other non-binary based applications