Reduced-complexity maximum-likelihood decoding for 3D MIMO code

The 3D MIMO code is a robust and efficient space-time coding scheme for the distributed MIMO broadcasting. However, it suffers from the high computational complexity if the optimal maximum-likelihood (ML) decoding is used. In this paper we first investigate the unique properties of the 3D MIMO code and consequently propose a simplified decoding algorithm without sacrificing the ML optimality. Analysis shows that the decoding complexity is reduced from O(M^8) to O(M^{4.5}) in quasi-static channels when M-ary square QAM constellation is used. Moreover, we propose an efficient implementation of the simplified ML decoder which achieves a much lower decoding time delay compared to the classical sphere decoder with Schnorr-Euchner enumeration.Comment: IEEE Wireless Communications and Networking Conference (WCNC 2013), Shanghai : China (2013

Achieving Low-Complexity Maximum-Likelihood Detection for the 3D MIMO Code

The 3D MIMO code is a robust and efficient space-time block code (STBC) for the distributed MIMO broadcasting but suffers from high maximum-likelihood (ML) decoding complexity. In this paper, we first analyze some properties of the 3D MIMO code to show that the 3D MIMO code is fast-decodable. It is proved that the ML decoding performance can be achieved with a complexity of O(M^{4.5}) instead of O(M^8) in quasi static channel with M-ary square QAM modulations. Consequently, we propose a simplified ML decoder exploiting the unique properties of 3D MIMO code. Simulation results show that the proposed simplified ML decoder can achieve much lower processing time latency compared to the classical sphere decoder with Schnorr-Euchner enumeration

Space-Time Codes Concatenated with Turbo Codes over Fading Channels

The uses of space-time code (STC) and iterative processing have enabled robust communications over fading channels at previously unachievable signal-to-noise ratios. Maintaining desired transmission rate while improving the diversity from STC is challenging, and the performance of the STC suffers considerably due to lack of channel state information (CSI). This dissertation research addresses issues of considerable importance in the design of STC with emphasis on efficient concatenation of channel coding and STC with theoretical bound derivation of the proposed schemes, iterative space-time trellis coding (STTC), and differential space-time codes. First, we concatenate space-time block code (STBC) with turbo code for improving diversity gain as well as coding gain. Proper soft-information sharing is indispensable to the iterative decoding process. We derive the required soft outputs from STBC decoders for passing to outer turbo code. Traditionally, the performance of STBC schemes has been evaluated under perfect channel estimation. For fast time-varying channel, obtaining the CSI is tedious if not impossible. We introduce a scheme of calculating the CSI at the receiver from the received signal without the explicit channel estimation. The encoder of STTC, which is generally decoded using Viterbi like algorithm, is based on a trellis structure. This trellis structure provides an inherent advantage for the STTC scheme that an iterative decoding is feasible with the minimal addition computational complexity. An iteratively decoded space-time trellis coding (ISTTC) is proposed in this dissertation, where the STTC schemes are used as constituent codes of turbo code. Then, the performance upper bound of the proposed ISTTC is derived. Finally, for implementing STBC without channel estimation and maintaining trans- mission rate, we concatenate differential space-time block codes (DSTBC) with ISTTC. The serial concatenation of DSTBC or STBC with ISTTC offers improving performance, even without an outer channel code. These schemes reduce the system complexity com- pared to the standalone ISTTC and increase the transmission rate under the same SNR condition. Detailed design procedures of these proposed schemes are analyzed

Comparison of code rate and transmit diversity in MIMO systems

A thesis submitted in ful lment of the requirements for the degree of Master of Science in the Centre of Excellence in Telecommunications and Software School of Electrical and Information Engineering, March 2016In order to compare low rate error correcting codes to MIMO schemes with transmit diversity, two systems with the same throughput are compared. A VBLAST MIMO system with (15; 5) Reed-Solomon coding is compared to an Alamouti MIMO system with (15; 10) Reed-Solomon coding. The latter is found to perform signi cantly better, indicating that transmit diversity is a more e ective technique for minimising errors than reducing the code rate. The Guruswami-Sudan/Koetter-Vardy soft decision decoding algorithm was implemented to allow decoding beyond the conventional error correcting bound of RS codes and VBLAST was adapted to provide reliability information. Analysis is also performed to nd the optimal code rate when using various MIMO systems.MT201

Near-Instantaneously Adaptive HSDPA-Style OFDM Versus MC-CDMA Transceivers for WIFI, WIMAX, and Next-Generation Cellular Systems

Burts-by-burst (BbB) adaptive high-speed downlink packet access (HSDPA) style multicarrier systems are reviewed, identifying their most critical design aspects. These systems exhibit numerous attractive features, rendering them eminently eligible for employment in next-generation wireless systems. It is argued that BbB-adaptive or symbol-by-symbol adaptive orthogonal frequency division multiplex (OFDM) modems counteract the near instantaneous channel quality variations and hence attain an increased throughput or robustness in comparison to their fixed-mode counterparts. Although they act quite differently, various diversity techniques, such as Rake receivers and space-time block coding (STBC) are also capable of mitigating the channel quality variations in their effort to reduce the bit error ratio (BER), provided that the individual antenna elements experience independent fading. By contrast, in the presence of correlated fading imposed by shadowing or time-variant multiuser interference, the benefits of space-time coding erode and it is unrealistic to expect that a fixed-mode space-time coded system remains capable of maintaining a near-constant BER

MIMO Systems

In recent years, it was realized that the MIMO communication systems seems to be inevitable in accelerated evolution of high data rates applications due to their potential to dramatically increase the spectral efficiency and simultaneously sending individual information to the corresponding users in wireless systems. This book, intends to provide highlights of the current research topics in the field of MIMO system, to offer a snapshot of the recent advances and major issues faced today by the researchers in the MIMO related areas. The book is written by specialists working in universities and research centers all over the world to cover the fundamental principles and main advanced topics on high data rates wireless communications systems over MIMO channels. Moreover, the book has the advantage of providing a collection of applications that are completely independent and self-contained; thus, the interested reader can choose any chapter and skip to another without losing continuity

Generalised differential golden code modulation: error performance analysis and bandwidth efficiency.

Doctoral Degree. University of KwaZulu-Natal, Durban.The receiver of a conventional differential modulation scheme performs detection without knowledge of the channel state information (CSI). This results in a 3dB performance loss compared to coherent modulation. In order to enhance this error performance, generalised differential modulation is utilised. This thesis firstly presents a generalised differential modulation scheme for the Golden code (GDMGC) based on quadrature amplitude modulation (QAM). The average bit error probability (ABEP) for the GDM-GC scheme is derived and simulations on bit error rates (BER) are carried out in order to verify the derived theoretical framework, where it is shown that BER results lie well within the derived bounds. In addition, compared to coherent GC with maximum likelihood (ML) detection both 16QAM and 64QAM GDM-GC result in approximately 0.4 dB performance loss for a frame length of L = 400. However, the computational complexity of the GDM-GC scheme is reduced significantly in comparison to the coherent ML detector. Secondly, this thesis extends the generalised differential modulation scheme to multiple input symbol Golden code and proposes a multiple input symbol generalised differential Golden code (MIS-GD-GC) scheme. This scheme not only boosts error performance in comparison to conventional differential multiple input symbol Golden code (MIS-GC), but it lso produces multiple diversity order compared to the conventional Golden code. The simulations on BER for the MIS-GD-GC scheme not only compare very well to the derived theoretical bounds but also show that the BER draws closer to that of coherent MIS-GC when the frame length is increased. For instance, at a frame length of L = 400 , the error performance gap between MIS-GD-GC and its coherent counterpart is only 0.4 dB. Finally, driven by the need to develop a scheme that can allow for transmission of more data to help meet the demands of modern wireless communication systems, this thesis seeks to improve the bandwidth efficiency of the GDM-GC scheme. An enhanced bandwidth efficient generalised differential Golden code (EBE-GD-GC) scheme based on QAM is proposed and its ABEP derived. The simulated BER results for the EBE-GD-GC scheme are shown to lie well within the derived ABEP and achieve almost the same error performance as GDM-GC at high signal-to-noise ratio (SNR) regions but with extra bit(s) of information sent in each transmitted space-time block code (STBC) compared to the typical GDM-GC scheme. In addition, compared to the conventional generalised differential Golden code, both 16QAM and 64QAM EBE-GD-GC result in < 1dB performance loss from a BER of 1 × 10−5

Towards an enhanced noncoherent massive MU-MIMO system

PhD ThesisMany multiple-input multiple-output (MIMO) downlink transmission schemes assume channel state information (CSI) is available at the receiver/transmitter. In practice, knowledge of CSI is often obtained by using pilot symbols transmitted periodically. However, for some systems, due to high mobility and the cost of channel training and estimation, CSI acquisition is not always feasible. The problem becomes even more difficult when many antennas are used in the system and the channel is changing very rapidly before training is completed. Moreover, as the number of transmit/receive antennas grows large, the number of pilot symbols, system overheads, latency, and power consumption will grow proportionately and thereby the system becomes increasingly complex. As an alternative, a noncoherent system may be used wherein the transmitter/receiver does not need any knowledge of the CSI to perform precoding or detection. This thesis focuses on the design of a noncoherent downlink transmission system to jointly improve the performance and achieve a simple low complexity transmission scheme in three MIMO system scenarios: low rate differential spacetime block coding (STBC) in a downlink multiuser (MU-MIMO) system; high rate differential algebraic STBC in a downlink MU-MIMO system; and differential downlink transmission in a massive MU-MIMO system. Three novel design methods for each of these systems are proposed and analysed thoroughly. For the MIMO system with a low rate noncoherent scheme, a differential STBC MU-MIMO system with a downlink transmission scheme is considered. Specifically, downlink precoding combined with differential modulation (DM) is used to shift the complexity from the receivers to the transmitter. The block diagonalization (BD) precoding scheme is used to cancel co-channel interference (CCI) in addition to exploiting its advantage of enhancing diversity. Since the BD scheme requires channel knowledge at the transmitter, the downlink spreading technique along with DM is also proposed, which does not require channel knowledge neither at the transmitter nor at the receivers. The orthogonal spreading (OS) scheme is employed to have similar principle as code division multiple access (CDMA) multiplexing scheme in order to eliminate the interference between users. As a STBC scheme, the Alamouti code is used that can be encoded/decoded using DM thereby eliminating the need for channel knowledge at the receiver. The proposed schemes yield low complexity transceivers while providing good performance. For the MIMO system with a high rate noncoherent scheme, a differential STBC MU-MIMO system that operates at a high data rate is considered. In particular, a full-rate full-diversity downlink algebraic transmission scheme combined with a differential STBC systems is proposed. To achieve this, perfect algebraic space time codes and Cayley differential (CD) transforms are employed. Since CSI is not needed at the differential receiver, differential schemes are ideal for multiuser systems to shift the complexity from the receivers to the transmitter, thus simplifying user equipment. Furthermore, OS matrices are employed at the transmitter to separate the data streams of different users and enable simple single user decoding. In the OS scheme, the transmitter does not require any knowledge of the CSI to separate the data streams of multiple users; this results in a system which does not need CSI at either end. With this system, to limit the number of possible codewords, a sphere decoder (SD) is used to decode the signals at the receiving end. The proposed scheme yields low complexity transceivers while providing full-rate full-diversity system with good performance. Lastly, a differential downlink transmission scheme is proposed for a massive MIMO system without explicit channel estimation. In particular, a downlink precoding technique combined with a differential encoding scheme is used to simplify the overall system complexity. A novel precoder is designed which, with a large number of transmit antennas, can effectively precancel the multiple access interference (MAI) for each user, thus enhancing the system performance. Maximising the worst case signal-to-interference-plus-noise ratio (SINR) is adopted to optimise the precoder for the users in which full power space profile (PSP) knowledge is available to the base station (BS). Also, two suboptimal solutions based on the matched and the orthogonality approach of PSP are provided to separate the data streams of multiple users. The decision feedback differential detection (DFDD) technique is employed to further improve the performance. In summary, the proposed methods eliminate MAI, enhance system performance, and achieve a simple low complexity system. Moreover, transmission overheads are significantly reduced, the proposed methods avoid explicit channel estimation at both ends.King Fahad Security Collage at the Ministry of Interior - Saudi Arabia

Performance of MIMO Schemes in Radio-over-fibre-based Distributed Antenna System

The research presented in this thesis has focused on the use of MIMO wireless communications in a RoF-based DAS to improve wireless coverage and capacity performance in an indoor environment. The aim is to analyse the practical issues that cause throughput to deteriorate when commercial MIMO APs are used in a RoF-DAS, and also to verify that improved performance - lower error rates and higher capacities - can be achieved by a large physical separation between the RAUs when specific multi-antenna scheme algorithms are used. The performance of an IEEE 802.11n MIMO-supported AP and IEEE 802.11g spatial-diversity-supported AP are investigated in a RoF-DAS when different fibre lengths are connecting the AP in the central unit to the RAUs, and when the RAUs are widely separated. The analysis indicates that for MIMO, the throughput drops rapidly due to severe ISI caused by differential delay when the fibre-length difference exceeds a certain distance, while for spatial diversity high throughputs can be maintained even at large fibre-length difference. Further, it was observed that largely separated RAU may lead to power imbalances and the throughput drops in specific wireless user's positions when the received power imbalance was above 12-15dB for MIMO-supported AP, while for spatial-diversity-supported AP the power imbalance does not affect the throughput. The majority of previous works on RoF-DAS for improving MIMO systems were based on commercial products and the specific algorithms used within these products are unknown. An investigation was carried out at microwave frequency with SIMO algorithms in RoF-DAS uplink, MISO and MIMO algorithms in RoF-DAS downlink, and compared with the performance of a SISO system. This investigation was later extended to millimetre-wave frequency where larger bands of frequency are available enabling the possibility of wider bandwidth and higher data rates. The result shows significantly reduced error rate and modestly increased capacity for a wireless 1x2 SIMO uplink using MRC algorithm and 2x1 MISO downlink using Alamouti STBC algorithm. Also, error rate was reduced for a wireless 2x2 MIMO downlink using the zero-forcing algorithm while, most importantly, greatly increased capacity was achieved through the spatial multiplexing gain

MIMO equalization.

Thesis (M.Sc.Eng.)-University of KwaZulu-Natal, Durban, 2005.In recent years, space-time block co'des (STBC) for multi-antenna wireless systems have emerged as attractive encoding schemes for wireless communications. These codes provide full diversity gain and achieve good performance with simple receiver structures without the additional increase in bandwidth or power requirements. When implemented over broadband channels, STBCs can be combined with orthogonal frequency division multiplexing (OFDM) or single carrier frequency domain (SC-FD) transmission schemes to achieve multi-path diversity and to decouple the broadband frequency selective channel into independent flat fading channels. This dissertation focuses on the SC-FD transmission schemes that exploit the STBC structure to provide computationally cost efficient receivers in terms of equalization and channel estimation. The main contributions in this dissertation are as follows: • The original SC-FD STBC receiver that bench marks STBC in a frequency selective channel is limited to coherent detection where the knowledge of the channel state information (CSI) is assumed at the receiver. We extend this receiver to a multiple access system. Through analysis and simulations we prove that the extended system does not incur any performance penalty. This key result implies that the SC-FD STBC scheme is suitable for multiple-user systems where higher data rates are possible. • The problem of channel estimation is considered in a time and frequency selective environment. The existing receiver is based on a recursive least squares (RLS) adaptive algorithm and provides joint equalization and interference suppression. We utilize a system with perfect channel state information (CSI) to show from simulations how various design parameters for the RLS algorithm can be selected in order to get near perfect CSI performance. • The RLS receiver has two modes of operation viz. training mode and direct decision mode. In training mode, a block of known symbols is used to make the initial estimate. To ensure convergence of the algorithm a re-training interval must be predefined. This results in an increase in the system overhead. A linear predictor that utilizes the knowled~e of the autocorrelation function for a Rayleigh fading channel is developed. The predictor is combined with. the adaptive receiver to provide a bandwidth efficient receiver by decreasing the training block size.· The simulation results show that the performance penalty for the new system is negligible. • Finally, a new Q-R based receiver is developed to provide a more robust solution to the RLS adaptive receiver. The simulation results clearly show that the new receiver outperforms the RLS based receiver at higher Doppler frequencies, where rapid channel variations result in numerical instability of the RLS algorithm. The linear predictor is also added to the new receiver which results in a more robust and bandwidth efficient receiver