Placing regenerators in optical networks to satisfy multiple sets of requests.

The placement of regenerators in optical networks has become an active area of research during the last years. Given a set of lightpaths in a network G and a positive integer d, regenerators must be placed in such a way that in any lightpath there are no more than d hops without meeting a regenerator. While most of the research has focused on heuristics and simulations, the first theoretical study of the problem has been recently provided in [10], where the considered cost function is the number of locations in the network hosting regenerators. Nevertheless, in many situations a more accurate estimation of the real cost of the network is given by the total number of regenerators placed at the nodes, and this is the cost function we consider. Furthermore, in our model we assume that we are given a finite set of p possible traffic patterns (each given by a set of lightpaths), and our objective is to place the minimum number of regenerators at the nodes so that each of the traffic patterns is satisfied. While this problem can be easily solved when d = 1 or p = 1, we prove that for any fixed d,p ≥ 2 it does not admit a PTASUnknown control sequence '\textsc', even if G has maximum degree at most 3 and the lightpaths have length O(d)(d). We complement this hardness result with a constant-factor approximation algorithm with ratio ln (d ·p). We then study the case where G is a path, proving that the problem is NP-hard for any d,p ≥ 2, even if there are two edges of the path such that any lightpath uses at least one of them. Interestingly, we show that the problem is polynomial-time solvable in paths when all the lightpaths share the first edge of the path, as well as when the number of lightpaths sharing an edge is bounded. Finally, we generalize our model in two natural directions, which allows us to capture the model of [10] as a particular case, and we settle some questions that were left open in [10]

Online regenerator placement

Connections between nodes in optical networks are realized by lightpaths. Due to the decay of the signal, a regenerator has to be placed on every lightpath after at most d hops, for some given positive integer d. A regenerator can serve only one lightpath. The placement of regenerators has become an active area of research during recent years, and various optimization problems have been studied. The first such problem is the Regeneration Location Problem (Rlp), where the goal is to place the regenerators so as to minimize the total number of nodes containing them. We consider two extreme cases of online Rlp regarding the value of d and the number k of regenerators that can be used in any single node. (1) d is arbitrary and k unbounded. In this case a feasible solution always exists. We show an O(log|X|⋅ logd)-competitive randomized algorithm for any network topology, where X is the set of paths of length d. The algorithm can be made deterministic in some cases. We show a deterministic lower bound of Ω( log(|E|/d)⋅logd log(log(|E|/d)⋅logd) ), where E is the edge set. (2) d = 2 and k = 1. In this case there is not necessarily a solution for a given input. We distinguish between feasible inputs (for which there is a solution) and infeasible ones. In the latter case, the objective is to satisfy the maximum number of lightpaths. For a path topology we show a lower bound of √ l /2 for the competitive ratio (where l is the number of internal nodes of the longest lightpath) on infeasible inputs, and a tight bound of 3 for the competitive ratio on feasible inputs

Cross-layer modeling and optimization of next-generation internet networks

Scaling traditional telecommunication networks so that they are able to cope with the volume of future traffic demands and the stringent European Commission (EC) regulations on emissions would entail unaffordable investments. For this very reason, the design of an innovative ultra-high bandwidth power-efficient network architecture is nowadays a bold topic within the research community. So far, the independent evolution of network layers has resulted in isolated, and hence, far-from-optimal contributions, which have eventually led to the issues today's networks are facing such as inefficient energy strategy, limited network scalability and flexibility, reduced network manageability and increased overall network and customer services costs. Consequently, there is currently large consensus among network operators and the research community that cross-layer interaction and coordination is fundamental for the proper architectural design of next-generation Internet networks. This thesis actively contributes to the this goal by addressing the modeling, optimization and performance analysis of a set of potential technologies to be deployed in future cross-layer network architectures. By applying a transversal design approach (i.e., joint consideration of several network layers), we aim for achieving the maximization of the integration of the different network layers involved in each specific problem. To this end, Part I provides a comprehensive evaluation of optical transport networks (OTNs) based on layer 2 (L2) sub-wavelength switching (SWS) technologies, also taking into consideration the impact of physical layer impairments (PLIs) (L0 phenomena). Indeed, the recent and relevant advances in optical technologies have dramatically increased the impact that PLIs have on the optical signal quality, particularly in the context of SWS networks. Then, in Part II of the thesis, we present a set of case studies where it is shown that the application of operations research (OR) methodologies in the desing/planning stage of future cross-layer Internet network architectures leads to the successful joint optimization of key network performance indicators (KPIs) such as cost (i.e., CAPEX/OPEX), resources usage and energy consumption. OR can definitely play an important role by allowing network designers/architects to obtain good near-optimal solutions to real-sized problems within practical running times

Multi-Band Optical Networks Capacity, Energy, and Techno-Economic Assessment

L'abstract è presente nell'allegato / the abstract is in the attachmen

Regenerator placement and fault management in multi-wavelength optical networks.

Shen, Dong.Thesis (M.Phil.)--Chinese University of Hong Kong, 2011.Includes bibliographical references (p. 98-106).Abstracts in English and Chinese.Abstract --- p.i摘要 --- p.ivAcknowledgements --- p.vTable of Contents --- p.viChapter Chapter 1 --- Background --- p.1Chapter 1.1 --- Translucent Optical Networks --- p.1Chapter 1.1.1 --- The Way Towards Translucent --- p.1Chapter 1.1.2 --- Translucent Optical Network Architecture Design and Planning --- p.3Chapter 1.1.3 --- Other Research Topics in Translucent Optical Networks --- p.6Chapter 1.2 --- Fault Monitoring in All-Optical Networks --- p.12Chapter 1.2.1 --- Fault Monitoring in Network Layer's Perspective --- p.12Chapter 1.2.2 --- Passive Optical Monitoring --- p.14Chapter 1.2.3 --- Proactive Optical Monitoring --- p.16Chapter 1.3 --- Contributions --- p.17Chapter 1.3.1 --- Translucent Optical Network Planning with Heterogeneous Modulation Formats --- p.17Chapter 1.3.2 --- Multiplexing Optimization in Translucent Optical Networks --- p.19Chapter 1.3.3 --- An Efficient Regenerator Placement and Wavelength Assignment Scheme in Translucent Optical Networks --- p.20Chapter 1.3.4 --- Adaptive Fault Monitoring in All-Optical Networks Utilizing Real-Time Data Traffic --- p.20Chapter 1.4 --- Organization of Thesis --- p.22Chapter Chapter 2 --- Regenerator Placement and Resource Allocation Optimization in Translucent Optical Networks --- p.23Chapter 2.1 --- Introduction --- p.23Chapter 2.2 --- Translucent Optical Network Planning with Heterogeneous Modulation Formats --- p.25Chapter 2.2.1 --- Motivation and Problem Statements --- p.25Chapter 2.2.2 --- A Two-Step Planning Algorithm Using Two Modulation Formats to Realize Any-to-Any Topology Connectivity --- p.28Chapter 2.2.3 --- Illustrative Examples --- p.30Chapter 2.2.3 --- ILP Formulation of Minimizing Translucent Optical Network Cost with Two Modulation Formats under Static Traffic Demands --- p.34Chapter 2.2.4 --- Illustrative Numeric Examples --- p.42Chapter 2.3 --- Resource Allocation Optimization in Translucent Optical Networks --- p.45Chapter 2.3.1 --- Multiplexing Optimization with Auxiliary Graph --- p.45Chapter 2.3.2 --- Simulation Study of Proposed Algorithm --- p.51Chapter 2.3.3 --- An Efficient Regenerator Placement and Wavelength Assignment Solution --- p.55Chapter 2.3.4 --- Simulation Study of Proposed Algorithm --- p.60Chapter 2.4 --- Summary --- p.64Chapter Chapter 3 --- Adaptive Fault Monitoring in All-Optical Networks Utilizing Real-Time Data Traffic --- p.65Chapter 3.1 --- Introduction --- p.65Chapter 3.2 --- Adaptive Fault Monitoring --- p.68Chapter 3.2.1 --- System Framework --- p.68Chapter 3.2.2 --- Phase 1: Passive Monitoring --- p.70Chapter 3.2.3 --- Phase 2: Proactive Probing --- p.71Chapter 3.2.4 --- Control Plane Design and Analysis --- p.80Chapter 3.2.5 --- Physical Layer Implementation and Suggestions --- p.83Chapter 3.3 --- Placement of Label Monitors --- p.83Chapter 3.3.1 --- ILP Formulation --- p.84Chapter 3.3.2 --- Simulation Studies --- p.86Chapter 3.3.3 --- Discussion of Topology Evolution Adaptiveness --- p.93Chapter 3.4 --- Summary --- p.95Chapter Chapter 4 --- Conclusions and Future Work --- p.95Chapter 4.1 --- Conclusions --- p.96Chapter 4.2 --- Future Work --- p.97Bibliography --- p.98Publications during M.Phil Study --- p.10

Optimal Regenerator Placement for Dedicated Path Protection in Impairment-Aware WDM Networks

Building resilient Wavelength Division Multiplexed (WDM) optical networks is an important area of research. This thesis deals with the design of reliable WDM networks where physical layer impairments are taken into account. This research addresses both the regenerator placement problem (RPP) and the routing with regenerator problem (RRP) in impairment-aware WDM networks, using dedicated path protection. Both the problems have been tackled using linear Integer formulations which can be implemented, using a solver such as the CPLEX. For solving RPP, two solutions have been proposed - i) a formulation that gives optimal solutions which works only for small networks, and ii) a highly effective heuristic which given an optimal solution in 97.5 to 99% of cases for networks having a size up to 60 nodes

Evaluation of the impact of resource disaggregation in future optical transport networks

The communications industry is experiencing constant transformation. Telecom operators consider Network Disaggregation a potential approach to redesign their current network architecture in order to thrive. It focuses on decoupling the optical transport hardware into independent functional blocks, combined with open-source orchestration systems, to abstract the control layer from the physical layer, acquiring software-based control and automation features. The key perceived benefits include reducing vendor lock-in, drive innovation and evolution, and offer flexibility to deploy the best-in-class equipment that fits the network needs, regardless of the supplier. However, there is uncertainty regarding the performance of a disaggregated system, with the introduction of interoperable open nodes to the network, a demerit on the reach of the propagated optical signals is expected compared to a traditional single-vendor system. In this regard, this thesis evaluates the impact of disaggregation on the network performance, specifically, considering several levels of lightpaths' reach reduction, the average number of connections which are denied service is estimated. Since signal regeneration emerges as the straight answer to overcome the reach limitations, its influence on the behavior of the network is analyzed as well. Moreover, the traffic grooming concept is introduced as an alternative to improve the network performance. The idea is to take benefit of the additional optical to electrical conversions performed for signal regeneration and groom low rate traffic streams in the already established lightpaths, looking to increase the capacity of the network. To this end, a network simulator was developed to test a disaggregated system under several conditions as varying the number of regenerators available in the network, allowing or not traffic grooming, and applying different modulation formats or connections' traffic profiles, all of them are compared to the behavior of a traditional integrated system. Overall the simulation results demonstrate an important demerit of the performance of the network as a function of the transmission reach reduction, forcing the use of additional regenerator nodes. Nevertheless, when implementing traffic grooming with a limited number of regenerators, a significant decrease of the network blocking probability is achieved. Thus, network operators must analyze if this benefit plus the advantages of an open model prevails to the cost generated by the additional OEO nodes

Optimization of WDM Optical Networks

Optical network, with its enormous data carrying capability, has become the obvious choice for today\u27s high speed communication networks. Wavelength Division Multiplexing (WDM) technology and Traffic Grooming techniques enable us to efficiently exploit the huge bandwidth capacity of optical fibers. Wide area translucent networks use sparse placement of regenerators to overcome the physical impairments and wavelength constraints introduced by all optical (transparent) networks, and achieve a performance level close to fully switched (opaque) networks at a much lesser network cost. In this dissertation we discuss our research on several issues on the optimal design of optical networks, including optimal traffic grooming in WDM optical networks, optimal regenerator placement problem (RRP) in translucent networks, dynamic lightpath allocation and dynamic survivable lightpath allocation in translucent networks and static lightpath allocation in translucent networks. With extensive simulation experiments, we have established the effectiveness and efficiencies of our proposed algorithms

Contribution à l'amélioration de l'efficacité des réseaux IP sur WDM en évaluant et en dépassant les limites du dimensionnement multicouche

The traffic passing through core networks grows by nearly 25% each year. To bring the costs under control, the different network layers of the network should work together to include more and more parameters during the network planning phase. This is called “multilayer network planning”. We study the multilayer network planning of static networks composed of two circuit switched layers (typically IP-over-WDM). We propose a semi-analytical model explaining the behavior of algorithms responsible for aggregation and routing in both layers. This theory allows comparing multilayer planning algorithms between them, but also explaining and enhancing their efficiency. We then describe the impact of the optical reach constraint in WDM networks on the results of a multilayer planning algorithm. Finally, we explain how these results apply to the design of future networks (dynamic and with heterogeneous optical layers)La quantité de données devant être transportée via les réseaux de cœur croit de près de 25% par an. Pour maîtriser les coûts, les différentes couches du réseau doivent mettre des informations en commun pour inclure de plus en plus de paramètres lors du dimensionnement du réseau. Cela s’appelle « dimensionnement multicouche ». Nous étudions le dimensionnement multicouche de réseaux statiques composés de deux couches utilisant la commutation en mode circuit (typiquement IP-sur-WDM). Nous proposons un modèle semi-analytique expliquant le comportement des algorithmes responsables de l’agrégation et du routage dans les deux couches. Ce cadre théorique permet de comparer les algorithmes de dimensionnement multicouche entre eux, mais aussi d’expliquer et d’améliorer leur efficience. Nous décrivons ensuite comment la contrainte de portée optique affecte les résultats d’un algorithme de dimensionnement multicouche. Enfin, nous expliquons comment ces résultats s'appliquent au dimensionnement des réseaux de nouvelle génération (dynamiques et hétérogènes en capacité optique