Measurement Based Reconfigurations in Optical Ring Metro Networks

Single-hop wavelength division multiplexing (WDM) optical ring networks operating in packet mode are one of themost promising architectures for the design of innovative metropolitan network (metro) architectures. They permit a cost-effective design, with a good combination of optical and electronic technologies, while supporting features like restoration and reconfiguration that are essential in any metro scenario. In this article, we address the tunability requirements that lead to an effective resource usage and permit reconfiguration in optical WDM metros.We introduce reconfiguration algorithms that, on the basis of traffic measurements, adapt the network configuration to traffic demands to optimize performance. Using a specific network architecture as a reference case, the paper aims at the broader goal of showing which are the advantages fostered by innovative network designs exploiting the features of optical technologies

Inside all-optical networks

Imagine a world where lightning speed Internet is as common as telephones today. Imagine when light, the fastest moving thing in the universe, is the signal-carrying transport medium. Imagine when bandwidth no more remains a constraint for any application. Imagine when imagination is the only limit! This all can be made possible with only one technology and that is optical communication. Optical networks have thus far provided a realization to a greater extent to the unlimited bandwidth dreams of this era, but as the demands are increasing, the electro-optic conversions seem to become bottlenecks in blended optical networks. The only answer to this is a complete migration to `All-Optical Networks\u27 (AONs) which promise an end-to-end optical transmission. This thesis will investigate various aspects of all-optical networks and prove that AONs perform better than currently existing electro-optical networks. In today\u27s\u27 electro-optical networks, routing and switching is performed in electronic domain. Performance analysis of electro-optical and all-optical networks would include node utilization, link utilization and percentage of traffic routed. It will be shown through Opnet Transport Planner simulations that AONs work better under various traffic conditions. The coming decade will see a great boom in demands on telecommunications networks. The development in bandwidth-hungry applications like real-time video transmission, telemedicine, distance learning and video on demand require both an unlimited amount of bandwidth and dependable QoS. It is well understood that electrically switched networks and copper cables will not be able to meet the future network demands effectively. The world has already agreed to move towards optical communication techniques through the introduction of fiber in access parts of the networks replacing copper. Now the race is to bring optics in higher layers of OSI reference model. Optical communication is on the horizon, and new discoveries are still underway to add to the value of available bandwidth through this technology. My research thesis will primarily focus on the design, architecture and network properties of AONs and challenges being faced by AONs in commercial deployment. Optical components required in AONs will be explored. A comparison between AONs and electro-optical networks will also be shown through optical transport planner simulations

Convergencia de tecnologías ópticas y Ethernet en LAN, MAN y SAN: nuevas arquitecturas, análisis de prestaciones y eficiencia energética

Mención Internacional en el título de doctorThe development of Information Technologies in the last decades, especially the last two, together with the introduction of computing devices to the mainstream consumer market, has had the logical consequence of the generalisation of the Internet access. The explosive development of the smartphone market has brought ubiquity to that generalisation, to the point that social interaction, content sharing and content production happens all the time. Social networks have all but increased that trend, maximising the diffusion of multimedia content: images, audio and video, which require high network capacities to be enjoyed quickly. This need for endless bandwidth and speed in information sharing brings challenges that affect mainly optical Metropolitan Area Networks (MANs) and Wide Area Networks (WANs). Furthermore, the wide spreading of Ethernet technologies has also brought the possibility to achieve economies of scale by either extending the reach of Ethernet Local Area Networks (LANs) to the MAN and WAN environment or even integrating them with Storage Area Networks (SANs). Finally, this generalisation of telecommunication technologies in every day life has as a consequence an important rise in energy consumption as well. Because of this, providing energy efficient strategies in networking is key to ensure the scalability of the whole Internet. In this thesis, the main technologies in all the fields mentioned above are reviewed, its core challenges identified and several contributions beyond the state of the art are suggested to improve today’s MANs andWANs. In the first contribution of this thesism, the integration between Metro Ethernet and Wavelength Division Multiplexion (WDM) optical transparent rings is explored by proposing an adaptation architecture to provide efficient broadcast and multicast. The second contribution explores the fusion between transparent WDM and OCDMA architectures to simplify medium access in a ring. Regarding SANs, the third contribution explores the challenges in SANs through the problems of Fibre Channel over Ethernet due to buffer design issues. In this contribution, analysis, design and validation with FCoE traces and simulation is provided to calculate buffer overflow probabilities in the absence of flow control mechanisms taking into account the bursty nature of SAN traffic. Finally, the fourth and last contribution addresses the problems of energy efficiency in Plastic Optical Fibres (POF), a new kind of optical fibre more suitable for transmission in vehicles and for home networking. This contribution suggests two packet coalescing strategies to further improve the energy effiency mechanisms in POFs.El desarrollo de las Tecnologías de la Información en las últimas décadas, especialmente las últimas dos, junto con la introducción de dispositivos informáticos al mercado de masas, ha tenido como consecuencia lógica la generalización del acceso a Internet. El explosivo desarrollo del mercado de teléfonos inteligentes ha añadido un factor de ubicuidad a tal generalización, al extremo de que la interacción social, la compartición y producción de contenidos sucede a cada instante. Las redes sociales no han hecho sino incrementar tal tendencia, maximizando la difusión de contenido multimedia: imágenes, audio y vídeo, los cuales requieren gran capacidad en las redes para poder obtenerse con rapidez. Esta necesidad de ancho de banda ilimitado y velocidad en la compartición de información trae consigo retos que afectan principalmente a las Redes de Área Metropolitana (Metropolitan Area Networks, MANs) y Redes de Área Extensa (Wide Area Networks, WANs). Además, la gran difusión de las tecnologías Ethernet ha traído la posibilidad de alcanzar economías de escala bien extendiendo el alcance de Ethernet más allá de las Redes de Área Local (Local Area Networks, LANs) al entorno de las MAN y las WAN o incluso integrándolas con Redes de Almacenamiento (Storage Area Networks, SANs). Finalmente, esta generalización de las tecnologías de la comunicación en la vida cotidiana tiene también como consecuencia un importante aumento en el consumo de energía. Por tanto, desarrollar estrategias de transmisión en red eficientes energéticamente es clave para asegurar la escalabilidad de Internet. En esta tesis, las principales tecnologías de todos los campos mencionados arriba serán estudiadas, sus más importantes retos identificados y se sugieren varias contribuciones más allá del actual estado del arte para mejorar las actuales MANs y WANs. En la primera contribución de esta tesis, se explora la integración entre Metro Ethernet y anillos ópticos transparentes por Multiplexión en Longitud de Onda (Wavelength Division Multiplex, WDM) mediante la proposición de una arquitectura de adaptación para permitir la difusión y multidifusión eficiente. La segunda contribución explora la fusión entre las arquitecturas transparentes WDM y arquitecturas por Accesso Dividido Múltiple por Códigos Ópticos (OCDMA) para simplificar el acceso en una red en anillo. En lo referente a las SANs, la tercera contribución explora los retos en SANs a través de los problemas de Fibre Channel sobre Ethernet debido a los problemas en el diseño de búferes. En esta contribución, se provee un análisis, diseño y validación con trazas FCoE para calcular las probabilidades de desbordamiento de buffer en ausencia de mecanismos de control de flujo teniendo en cuenta la naturaleza rafagosa del tráfico de SAN. Finalmente, la cuarta y última contribución aborda los problemas de eficiencia energética en Fibras Ópticas Plásticas (POF), una nueva variedad de fibra óptica más adecuada para la transmisión en vehículos y para entornos de red caseros. Esta contribución sugiere dos estrategias de agrupamiento de paquetes para mejorar los mecanismos de eficiencia energética en POFs.Programa Oficial de Posgrado en Ingeniería TelemáticaPresidente: Luca Valcarenghi.- Secretario: Ignacio Soto Campos.- Vocal: Bas Huiszoo

Multi-MetaRing fairness control in a WDM folded-bus architecture

The paper deals with fairness issues in a slotted, single-hop, WDM (Wavelength Division Multiplexing) optical architecture, based on a folded bus topology, previously proposed as a broadband access system or as a metro network. The peculiar fairness problem arising in this folded bus based architecture is addressed and an extension of the MetaRing protocol to the WDM scenario, named Multi-MetaRing, is proposed. Feasible Multi-MetaRing strategies are defined and analyzed. Both fair access and high aggregate network throughput can be achieved with a low complexity distributed access protocol by properly handling node access through all WDM channel