1,366 research outputs found

    A new MAP based channel estimation technique for multiple-input multiple-output (MIMO) systems

    Get PDF
    Multiple-Input Multiple-Output (MIMO) systems that provide significant increase in channel capacity is rapidly emerging as the new frontier of wireless industry. MIMO systems require the simultaneous use of multiple transmit and receive antennas to dramatically increase data rates and to improve performance reliability. An effective and practical way to approach the capacity promised by MIMO systems is to employ space-time coding (STC). It elegantly combines temporal and spatial correlation into the transmitted symbols to realize diversity and coding gains. Most STC schemes are designed for known quasi-static channels however this assumption is not always justified. MIMO channels often undergo frequency selective fading that leads to intersymbol interference (ISI), which limits the performance of MIMO systems. The effect of imperfect channel estimation on the bit error rate (BER) of MIMO systems utilizing STC is investigated. An analysis and comparison into the BER degradations of simple transmit diversity (STD) and maximal ratio combining (MRC) schemes due to multipath channel estimation errors are presented. Closed form expressions are derived for the BER performances of the schemes that employ an equalization process to mitigate the ISI caused by the multipath in frequency selective channel. BER curves show that the performance deterioration in the MIMO scheme outweighs the benefits achieved over the single antenna case when the channel estimation errors are large. Results expose the deleterious effects of inaccurate channel estimation on the performance of MIMO systems. Hence, the development of practical and novel channel estimation approaches are desired for MIMO systems using STC. This dissertation introduces a new MAP based channel estimation technique that is amenable to STC scheme employing two transmit antennas and operating in multipath bandlimited channel. The complex channel parameters are treated as two real-valued tap coefficients; each taking one of M possible amplitude levels with equal probability. The proposed estimation technique is based on an iterative procedure derived through the maximum a posteriori (MAP) probability approach. Unlike classic estimation techniques, we iterate on the probabilities of the different coefficients rather than on the values of the coefficients. Two low complexity algorithms based on the developed channel estimation technique and simple to implement in practical MIMO systems are also introduced. The performances of the two algorithms are assessed by combined analysis and simulation. Results are presented and compared against the performance of conventional channel estimation techniques. Results show that the required performance can be achieved with less number of iterations using the proposed algorithms compared to conventional techniques

    A Novel Antenna Selection Scheme for Spatially Correlated Massive MIMO Uplinks with Imperfect Channel Estimation

    Full text link
    We propose a new antenna selection scheme for a massive MIMO system with a single user terminal and a base station with a large number of antennas. We consider a practical scenario where there is a realistic correlation among the antennas and imperfect channel estimation at the receiver side. The proposed scheme exploits the sparsity of the channel matrix for the effective selection of a limited number of antennas. To this end, we compute a sparse channel matrix by minimising the mean squared error. This optimisation problem is then solved by the well-known orthogonal matching pursuit algorithm. Widely used models for spatial correlation among the antennas and channel estimation errors are considered in this work. Simulation results demonstrate that when the impacts of spatial correlation and imperfect channel estimation introduced, the proposed scheme in the paper can significantly reduce complexity of the receiver, without degrading the system performance compared to the maximum ratio combining.Comment: in Proc. IEEE 81st Vehicular Technology Conference (VTC), May 2015, 6 pages, 5 figure

    A Data-Aided Channel Estimation Scheme for Decoupled Systems in Heterogeneous Networks

    Get PDF
    Uplink/downlink (UL/DL) decoupling promises more flexible cell association and higher throughput in heterogeneous networks (HetNets), however, it hampers the acquisition of DL channel state information (CSI) in time-division-duplex (TDD) systems due to different base stations (BSs) connected in UL/DL. In this paper, we propose a novel data-aided (DA) channel estimation scheme to address this problem by utilizing decoded UL data to exploit CSI from received UL data signal in decoupled HetNets where a massive multiple-input multiple-output BS and dense small cell BSs are deployed. We analytically estimate BER performance of UL decoded data, which are used to derive an approximated normalized mean square error (NMSE) expression of the DA minimum mean square error (MMSE) estimator. Compared with the conventional least square (LS) and MMSE, it is shown that NMSE performances of all estimators are determined by their signal-to-noise ratio (SNR)-like terms and there is an increment consisting of UL data power, UL data length and BER values in the SNR-like term of DA method, which suggests DA method outperforms the conventional ones in any scenarios. Higher UL data power, longer UL data length and better BER performance lead to more accurate estimated channels with DA method. Numerical results verify that the analytical BER and NMSE results are close to the simulated ones and a remarkable gain in both NMSE and DL rate can be achieved by DA method in multiple scenarios with different modulations

    Dispensing with channel estimation: differentially modulated cooperative wireless communications

    No full text
    As a benefit of bypassing the potentially excessive complexity and yet inaccurate channel estimation, differentially encoded modulation in conjunction with low-complexity noncoherent detection constitutes a viable candidate for user-cooperative systems, where estimating all the links by the relays is unrealistic. In order to stimulate further research on differentially modulated cooperative systems, a number of fundamental challenges encountered in their practical implementations are addressed, including the time-variant-channel-induced performance erosion, flexible cooperative protocol designs, resource allocation as well as its high-spectral-efficiency transceiver design. Our investigations demonstrate the quantitative benefits of cooperative wireless networks both from a pure capacity perspective as well as from a practical system design perspective

    Indoor off-body wireless communication: static beamforming versus space-time coding

    Get PDF
    The performance of beamforming versus space-time coding using a body-worn textile antenna array is experimentally evaluated for an indoor environment, where a walking rescue worker transmits data in the 2.45 GHz ISM band, relying on a vertical textile four-antenna array integrated into his garment. The two transmission scenarios considered are static beamforming at low-elevation angles and space-time code based transmit diversity. Signals are received by a base station equipped with a horizontal array of four dipole antennas providing spatial receive diversity through maximum-ratio combining. Signal-to-noise ratios, bit error rate characteristics, and signal correlation properties are assessed for both off-body transmission scenarios. Without receiver diversity, the performance of space-time coding is generally better. In case of fourth-order receiver diversity, beamforming is superior in line-of-sight conditions. For non-line-of-sight propagation, the space-time codes perform better as soon as bit error rates are low enough for a reliable data link

    Multipath Multiplexing for Capacity Enhancement in SIMO Wireless Systems

    Full text link
    This paper proposes a novel and simple orthogonal faster than Nyquist (OFTN) data transmission and detection approach for a single input multiple output (SIMO) system. It is assumed that the signal having a bandwidth BB is transmitted through a wireless channel with LL multipath components. Under this assumption, the current paper provides a novel and simple OFTN transmission and symbol-by-symbol detection approach that exploits the multiplexing gain obtained by the multipath characteristic of wideband wireless channels. It is shown that the proposed design can achieve a higher transmission rate than the existing one (i.e., orthogonal frequency division multiplexing (OFDM)). Furthermore, the achievable rate gap between the proposed approach and that of the OFDM increases as the number of receiver antennas increases for a fixed value of LL. This implies that the performance gain of the proposed approach can be very significant for a large-scale multi-antenna wireless system. The superiority of the proposed approach is shown theoretically and confirmed via numerical simulations. {Specifically, we have found {upper-bound average} rates of 15 bps/Hz and 28 bps/Hz with the OFDM and proposed approaches, respectively, in a Rayleigh fading channel with 32 receive antennas and signal to noise ratio (SNR) of 15.3 dB. The extension of the proposed approach for different system setups and associated research problems is also discussed.Comment: IEEE Transactions on Wireless Communication
    corecore