Barrel Shifter Physical Unclonable Function Based Encryption

Physical Unclonable Functions (PUFs) are circuits designed to extract physical randomness from the underlying circuit. This randomness depends on the manufacturing process. It differs for each device enabling chip-level authentication and key generation applications. We present a protocol utilizing a PUF for secure data transmission. Parties each have a PUF used for encryption and decryption; this is facilitated by constraining the PUF to be commutative. This framework is evaluated with a primitive permutation network - a barrel shifter. Physical randomness is derived from the delay of different shift paths. Barrel shifter (BS) PUF captures the delay of different shift paths. This delay is entangled with message bits before they are sent across an insecure channel. BS-PUF is implemented using transmission gates; their characteristics ensure same-chip reproducibility, a necessary property of PUFs. Post-layout simulations of a common centroid layout 8-level barrel shifter in 0.13 {\mu}m technology assess uniqueness, stability and randomness properties. BS-PUFs pass all selected NIST statistical randomness tests. Stability similar to Ring Oscillator (RO) PUFs under environment variation is shown. Logistic regression of 100,000 plaintext-ciphertext pairs (PCPs) failed to successfully model BS- PUF behavior

Extended Abstract: Analysis of 1000 Arbiter PUF based RFID Tags

In this extended abstract a large-scale analysis of 4- way Arbiter PUFs is performed with measurement results from 1000 RFID tags. Arbiter PUFs are one of the most important building blocks in PUF-based protocols and have been the subject of many papers. However, in the past often only software simulations or a limited number of test chips were available for analysis. Therefore, the goal of this work is to verify earlier findings in regard to the uniqueness and reliability of Arbiter PUFs by using a much larger measurement set. Furthermore, we used machine learning algorithms to approximate and compare the internal delay differences of the employed PUF. One of the main research questions in this paper is to examine if any “outliers” occurred, i.e., if some tags performed considerably different. This might for example happen due to some unusual manufacturing variations or faults. However, our findings are that for all of the analyzed tags the parameters fell within the range of a Gaussian distribution without significant outliers. Hence, our results are indeed in line with the results of prior work

Energy Harvesting and Sensor Based Hardware Security Primitives for Cyber-Physical Systems

The last few decades have seen a large proliferation in the prevalence of cyber-physical systems. Although cyber-physical systems can offer numerous advantages to society, their large scale adoption does not come without risks. Internet of Things (IoT) devices can be considered a significant component within cyber-physical systems. They can provide network communication in addition to controlling the various sensors and actuators that exist within the larger cyber-physical system. The adoption of IoT features can also provide attackers with new potential avenues to access and exploit a system\u27s vulnerabilities. Previously, existing systems could more or less be considered a closed system with few potential points of access for attackers. Security was thus not typically a core consideration when these systems were originally designed. The cumulative effect is that these systems are now vulnerable to new security risks without having native security countermeasures that can easily address these vulnerabilities. Even just adding standard security features to these systems is itself not a simple task. The devices that make up these systems tend to have strict resource constraints in the form of power consumption and processing power. In this dissertation, we explore how security devices known as Physically Unclonable Functions (PUFs) could be used to address these concerns. PUFs are a class of circuits that are unique and unclonable due to inherent variations caused by the device manufacturing process. We can take advantage of these PUF properties by using the outputs of PUFs to generate secret keys or pseudonyms that are similarly unique and unclonable. Existing PUF designs are commonly based around transistor level variations in a special purpose integrated circuit (IC). Integrating these designs within a system would still require additional hardware along with system modification to interact with the device. We address these concerns by proposing a novel PUF design methodology for the creation of PUFs whose integration within these systems would minimize the cost of redesigning the system by reducing the need to add additional hardware. This goal is achieved by creating PUF designs from components that may already exist within these systems. A PUF designed from existing components creates the possibility of adding a PUF (and thus security features) to the system without actually adding any additional hardware. This could allow PUFs to become a more attractive security option for integration with resource constrained devices. Our proposed approach specifically targets sensors and energy harvesting devices since they can provide core functions within cyber-physical systems such as power generation and sensing capabilities. These components are known to exhibit variations due to the manufacturing process and could thus be utilized to design a PUF. Our first contribution is the proposal of a novel PUF design methodology based on using components which are already commonly found within cyber-physical systems. The proposed methodology uses eight sensors or energy harvesting devices along with a microcontroller. It is unlikely that single type of sensor or energy harvester will exist in all possible cyber-physical systems. Therefore, it is important to create a range of designs in order to reach a greater portion of cyber-physical systems. The second contribution of this work is the design of a PUF based on piezo sensors. Our third contribution is the design of a PUF that utilizes thermistor temperature sensors. The fourth contribution of this work is a proposed solar cell based PUF design. Furthermore, as a fifth contribution of this dissertation we evaluate a selection of common solar cell materials to establish which type of solar cell would be best suited to the creation of a PUF based on the operating conditions. The viability of the proposed designs is evaluated through testing in terms of reliability and uniformity. In addition, Monte Carlo simulations are performed to evaluate the uniqueness property of the designs. For our final contribution we illustrate the security benefits that can be achieved through the adoption of PUFs by cyber-physical systems. For this purpose we chose to highlight vehicles since they are a very popular example of a cyber-physical system and they face unique security challenges which are not readily solvable by standard solutions. Our contribution is the proposal of a novel controller area network (CAN) security framework that is based on PUFs. The framework does not require any changes to the underlying CAN protocol and also minimizes the amount of additional message passing overhead needed for its operation. The proposed framework is a good example of how the cost associated with implementing such a framework could be further reduced through the adoption of our proposed PUF designs. The end result is a method which could introduce security to an inherently insecure system while also making its integration as seamless as possible by attempting to minimize the need for additional hardware

Introduction to Physically Unclonable Fuctions: Properties and Applications

During the last years, Physically Unclonable Functions (PUFs) have become a very important research area in the field of hardware security due to their capability of generating volatile secret keys as well as providing a low-cost authentication. In this paper, an introduction to Physically Unclonable Functions is given, including their definition, properties and applications. Finally, as an example of how to design a PUF, the general structure of a ring oscillator PUF is presented

Physical Unclonable Function Reliability on Reconfigurable Hardware and Reliability Degradation with Temperature and Supply Voltage Variations

A hardware security solution using a Physical Unclonable Function (PUF) is a promising approach to ensure security for physical systems. PUF utilizes the inherent instance-specific parameters of physical objects and it is evaluated based on the performance parameters such as uniqueness, reliability, randomness, and tamper evidence of the Challenge and Response Pairs (CRPs). These performance parameters are affected by operating conditions such as temperature and supply voltage variations. In addition, PUF implementation on Field Programmable Gate Array (FPGA) platform is proven to be more complicated than PUF implementation on Application-Specific Integrated Circuit (ASIC) technologies. The automatic placement and routing of logic cells in FPGA can affect the performance of PUFs due to path delay imbalance. In this work, the impact of power supply and temperature variations, on the reliability of an arbiter PUF is studied. Simulation results are conducted to determine the effects of these varying conditions on the CRPs. Simulation results show that ± 10% of power supply variation can affect the reliability of an arbiter PUF by about 51%, similarly temperature fluctuation between -40 0C and +60 0C reduces the PUF reliability by 58%. In addition, a new methodology to implement a reliable arbiter PUF on an FPGA platform is presented. Instead of using an extra delay measurement module, the Chip Planner tool for FPGA is used for manually placement to minimize the path delay misalignment to less than 8 ps

Total Ionizing Dose Effects on a Delay-Based Physical Unclonable Function Implemented in FPGAs

Physical Unclonable Functions (PUFs) are hardware security primitives that are increasingly being used for authentication and key generation in ICs and FPGAs. For space systems, they are a promising approach to meet the needs for secure communications at low cost. To this purpose, it is essential to determine if they are reliable in the space radiation environment. In this work we evaluate the Total Ionizing Dose effects on a delay-based PUF implemented in SRAM-FPGA, namely a Ring Oscillator PUF. Several major quality metrics have been used to analyze the evolution of the PUF response with the total ionizing dose. Experimental results demonstrate that total ionizing dose has a perceptible effect on the quality of the PUF response, but it could still be used for space applications by making some appropriate corrections.Ministerio de Economía y Competitividad ESP2015-68245-C4-1-P, ESP-2015-68245-C4-4-P