46,473 research outputs found
Two-Hop Routing with Traffic-Differentiation for QoS Guarantee in Wireless Sensor Networks
This paper proposes a Traffic-Differentiated Two-Hop Routing protocol for
Quality of Service (QoS) in Wireless Sensor Networks (WSNs). It targets WSN
applications having different types of data traffic with several priorities.
The protocol achieves to increase Packet Reception Ratio (PRR) and reduce
end-to-end delay while considering multi-queue priority policy, two-hop
neighborhood information, link reliability and power efficiency. The protocol
is modular and utilizes effective methods for estimating the link metrics.
Numerical results show that the proposed protocol is a feasible solution to
addresses QoS service differenti- ation for traffic with different priorities.Comment: 13 page
An objective based classification of aggregation techniques for wireless sensor networks
Wireless Sensor Networks have gained immense popularity in recent years due to their ever increasing capabilities and wide range of critical applications. A huge body of research efforts has been dedicated to find ways to utilize limited resources of these sensor nodes in an efficient manner. One of the common ways to minimize energy consumption has been aggregation of input data. We note that every aggregation technique has an improvement objective to achieve with respect to the output it produces. Each technique is designed to achieve some target e.g. reduce data size, minimize transmission energy, enhance accuracy etc. This paper presents a comprehensive survey of aggregation techniques that can be used in distributed manner to improve lifetime and energy conservation of wireless sensor networks. Main contribution of this work is proposal of a novel classification of such techniques based on the type of improvement they offer when applied to WSNs. Due to the existence of a myriad of definitions of aggregation, we first review the meaning of term aggregation that can be applied to WSN. The concept is then associated with the proposed classes. Each class of techniques is divided into a number of subclasses and a brief literature review of related work in WSN for each of these is also presented
A Geometric Approach to Slot Alignment in Wireless Sensor Networks
Traditionally, slotted communication protocols have employed guard times to delineate and align slots. These guard times may expand the slot duration significantly, especially when clocks are allowed to drift for longer time to reduce clock synchronization overhead. Recently, a new class of lightweight protocols for statistical estimation in wireless sensor networks have been proposed. This new class requires very short transmission durations (jam signals), thus the traditional approach of using guard times would impose significant overhead. We propose a new, more efficient algorithm to align slots. Based on geometrical properties of space, we prove that our approach bounds the slot duration by only a constant factor of what is needed. Furthermore, we show by simulation that this bound is loose and an even smaller slot duration is required, making our approach even more efficient.National Science Foundation (CNS Cybertrust Award 0524477, CNS ITR Award 0205294, EIA RI Award 0202067
Low Power, Low Delay: Opportunistic Routing meets Duty Cycling
Traditionally, routing in wireless sensor networks consists of
two steps: First, the routing protocol selects a next hop,
and, second, the MAC protocol waits for the intended destination
to wake up and receive the data. This design makes
it difficult to adapt to link dynamics and introduces delays
while waiting for the next hop to wake up.
In this paper we introduce ORW, a practical opportunistic
routing scheme for wireless sensor networks. In a dutycycled
setting, packets are addressed to sets of potential receivers
and forwarded by the neighbor that wakes up first
and successfully receives the packet. This reduces delay and
energy consumption by utilizing all neighbors as potential
forwarders. Furthermore, this increases resilience to wireless
link dynamics by exploiting spatial diversity. Our results
show that ORW reduces radio duty-cycles on average
by 50% (up to 90% on individual nodes) and delays by 30%
to 90% when compared to the state of the art
On Link Estimation in Dense RPL Deployments
The Internet of Things vision foresees billions of
devices to connect the physical world to the digital world. Sensing
applications such as structural health monitoring, surveillance or
smart buildings employ multi-hop wireless networks with high
density to attain sufficient area coverage. Such applications need
networking stacks and routing protocols that can scale with
network size and density while remaining energy-efficient and
lightweight. To this end, the IETF RoLL working group has
designed the IPv6 Routing Protocol for Low-Power and Lossy
Networks (RPL). This paper discusses the problems of link quality
estimation and neighbor management policies when it comes
to handling high densities. We implement and evaluate different
neighbor management policies and link probing techniques in
Contiki’s RPL implementation. We report on our experience
with a 100-node testbed with average 40-degree density. We show
the sensitivity of high density routing with respect to cache sizes
and routing metric initialization. Finally, we devise guidelines for
design and implementation of density-scalable routing protocols
IETF standardization in the field of the Internet of Things (IoT): a survey
Smart embedded objects will become an important part of what is called the Internet of Things. However, the integration of embedded devices into the Internet introduces several challenges, since many of the existing Internet technologies and protocols were not designed for this class of devices. In the past few years, there have been many efforts to enable the extension of Internet technologies to constrained devices. Initially, this resulted in proprietary protocols and architectures. Later, the integration of constrained devices into the Internet was embraced by IETF, moving towards standardized IP-based protocols. In this paper, we will briefly review the history of integrating constrained devices into the Internet, followed by an extensive overview of IETF standardization work in the 6LoWPAN, ROLL and CoRE working groups. This is complemented with a broad overview of related research results that illustrate how this work can be extended or used to tackle other problems and with a discussion on open issues and challenges. As such the aim of this paper is twofold: apart from giving readers solid insights in IETF standardization work on the Internet of Things, it also aims to encourage readers to further explore the world of Internet-connected objects, pointing to future research opportunities
- …