Design of interface selection protocols for multi-homed wireless networks

This thesis was submitted for the degree of Doctor of Philosophy and was awarded by Brunel University on 10 December 2010.The IEEE 802.11/802.16 standards conformant wireless communication stations have multi-homing transmission capability. To achieve greater communication efficiency, multi-homing capable stations use handover mechanism to select appropriate transmission channel according to variations in the channel quality. This thesis presents three internal-linked handover schemes, (1) Interface Selection Protocol (ISP), belonging to Wireless Local Area Network (WLAN)- Worldwide Interoperability for Microwave Access (WiMAX) environment (2) Fast Channel Scanning (FCS) and (3) Traffic Manager (TM), (2) and (3) belonging to WiMAX Environment. The proposed schemes in this thesis use a novel mechanism of providing a reliable communication route. This solution is based on a cross-layer communication framework, where the interface selection module uses various network related parameters from Medium Access Control (MAC) sub-layer/Physical Layer (PHY) across the protocol suite for decision making at the Network layer. The proposed solutions are highly responsive when compared with existing multi-homed schemes; responsiveness is one of the key factors in the design of such protocols. Selected route under these schemes is based on the most up to date link-layer information. Therefore, such a route is not only reliable in terms of route optimization but it also fulfils the application demands in terms of throughput and delay. Design of ISP protocol use probing frames during the route discovery process. The 802.11 mandates the use of different rates for data transmission frames. The ISP-metric can be incorporated into various routing aspects and its applicability is determined by the possibility of provision of MAC dependent parameters that are used to determine the best path metric values. In many cases, higher device density, interference and mobility cause variable medium access delays. It causes creation of ‘unreachable zones’, where destination is marked as unreachable. However, by use of the best path metric, the destination has been made reachable, anytime and anywhere, because of the intelligent use of the probing frames and interface selection algorithm implemented. The IEEE 802.16e introduces several MAC level queues for different access categories, maintaining service requirement within these queues; which imply that frames from a higher priority queue, i.e. video frames, are serviced more frequently than those belonging to lower priority queues. Such an enhancement at the MAC sub-layer introduces uneven queuing delays. Conventional routing protocols are unaware of such MAC specific constraints and as a result, these factors are not considered which result in channel performance degradation. To meet such challenges, the thesis presents FCS and TM schemes for WiMAX. For FCS, Its solution is to improve the mobile WiMAX handover and address the scanning latency. Since minimum scanning time is the most important issue in the handover process. This handover scheme aims to utilize the channel efficiently and apply such a procedure to reduce the time it takes to scan the neighboring access stations. TM uses MAC and physical layer (PHY) specific information in the interface metric and maintains a separate path to destination by applying an alternative interface operation. Simulation tests and comparisons with existing multi-homed protocols and handover schemes demonstrate the effectiveness of incorporating the medium dependent parameters. Moreover, show that suggested schemes, have shown better performance in terms of end-to-end delay and throughput, with efficiency up to 40% in specific test scenarios

Framework to facilitate smooth handovers between mobile IPv6 networks

Fourth generation (4G) mobile communication networks are characterised by heterogeneous access networks and IP based transport technologies. Different access technologies give users choices to select services such as levels of Quality of Service (QoS) support, business models and service providers. Flexibility of heterogeneous access is compounded by the overhead of scanning to discover accessible services, which added to the handoff latency. This thesis has developed mechanisms for service discovery and service selection, along with a novel proposal for mobility management architectures that reduced handoff latency. The service discovery framework included a service advertisement data repository and a single frequency band access mechanism, which enabled users to explore services offered by various operators with a reduced scanning overhead. The novel hierarchical layout of the repository enabled it to categorise information into various layers and facilitate location based information retrieval. The information made available by the repository included cost, bandwidth, Packet Loss (PL), latency, jitter, Bit Error Rate (BER), location and service connectivity information. The single frequency band access mechanism further enabled users to explore service advertisements in the absence of their main service providers. The single frequency access mechanism broadcasted service advertisements information piggybacked onto a router advertisement packet on a reserved frequency band for advertisements. Results indicated that scanning 13 channels on 802.11 b interface takes 189ms whereas executing a query with maximum permissible search parameters on the service advertisement data repository takes 67ms. A service selection algorithm was developed to make handoff decisions utilising the service advertisements acquired from the service discovery framework; based on a user's preference. The selection algorithm reduced the calculation overhead by eliminating unsuitable networks; based on interface compatibility, service provider location, unacceptable QoS (Quality of service) and unacceptable cost; from the selection process. The selection algorithm utilised cost, bandwidth, PL, latency, jitter, BER and terminal power for computing the most suitable network. Results indicated that the elimination based approach has improved the performance of the algorithm by 35% over non- elimination oriented selection procedures, even after utilising more selection parameters. The service discovery framework and the service selection algorithm are flexible enough to be employed in most mobility management architectures. The thesis recommends Seamless Mobile Internet Protocol (SMIP) as a mobility management scheme based on the simulation results. The SMIP protocol, a combination of Hierarchical Mobile Internet Protocol (HMIP) and Fast Mobile Internet Protocol (FMIP), suffered hand off latency increases when undergoing a global handoff due to HMIP. The proposed modification to the HMIP included the introduction of a coverage area overlap, to reduce the global handoff latency. The introduction of a Home Address (HA) in Wireless Local Area Networks (WLAN) binding table enabled seamless handoffs from WLANs by having a redirection mechanism for the user's packets after handoff. The thesis delivered a new mobility management architecture with mechanisms for service discovery and service selection. The proposed framework enabled user oriented, application centric and terminal based approach for selecting IPv6 networks

AN APU BASED UPDATION SCHEME WITH ADDED SECURITY MEASURES

Routing with the use of location information has become one of the most suitable routing strategies in wireless mobile ad hoc network mainly due to its scalability.  Position information of the nodes is primary requirement in geographic routing.  Nodes for forwarding are selected among neighbors based on their location. Each node in the network should be aware of its neighbor’s location in order to maintain the accuracy of local topology. Hence updation of location information through beacon is necessary. Existing mechanisms invokes periodic beacon update scheme which in turn consumes the network resources specifically when the network traffic is high it leads to packet loss and at times causes retransmission of data packet  .In this work, adaptive position update is proposed which dynamically adjusts the beacon updation frequency according to the varying network conditions. APU is based on two simple principles nodes which moves with greater speed and nodes closer to forwarding paths update their positions more frequently (and vice versa)

Provision of adaptive and context-aware service discovery for the Internet of Things

The IoT concept has revolutionised the vision of the future Internet with the advent of standards such as 6LoWPAN making it feasible to extend the Internet into previously isolated environments, e.g., WSNs. The abstraction of resources as services, has opened these environments to a new plethora of potential applications. Moreover, the web service paradigm can be used to provide interoperability by offering a standard interface to interact with these services to enable WoT paradigm. However, these networks pose many challenges, in terms of limited resources, that make the adaptability of existing IP-based solutions infeasible. As traditional service discovery and selection solutions demand heavy communication and use bulky formats, which are unsuitable for these resource-constrained devices incorporating sleep cycles to save energy. Even a registry based approach exhibits burdensome traffic in maintaining the availability status of the devices. The feasible solution for service discovery and selection is instrumental to enable the wide application coverage of these networks in the future. This research project proposes, TRENDY, a new compact and adaptive registry-based SDP with context awareness for the IoT, with more emphasis given to constrained networks, e.g., 6LoWPAN It uses CoAP-based light-weight and RESTful web services to provide standard interoperable interfaces, which can be easily translated from HTTP. TRENDY's service selection mechanism collects and intelligently uses the context information to select appropriate services for user applications based on the available context information of users and services. In addition, TRENDY introduces an adaptive timer algorithm to minimise control overhead for status maintenance, which also reduces energy consumption. Its context-aware grouping technique divides the network at the application layer, by creating location-based groups. This grouping of nodes localises the control overhead and provides the base for service composition, localised aggregation and processing of data. Different grouping roles enable the resource-awareness by offering profiles with varied responsibilities, where high capability devices can implement powerful profiles to share the load of other low capability devices. Thus, it allows the productive usage of network resources. Furthermore, this research project proposes APPUB, an adaptive caching technique, that has the following benefits: it allows service hosts to share their load with the resource directory and also decreases the service invocation delay. The performance of TRENDY and its mechanisms is evaluated using an extensive number of experiments performed using emulated Tmote sky nodes in the COOJA environment. The analysis of the results validates the benefit of performance gain for all techniques. The service selection and APPUB mechanisms improve the service invocation delay considerably that, consequently, reduces the traffic in the network. The timer technique consistently achieved the lowest control overhead, which eventually decreased the energy consumption of the nodes to prolong the network lifetime. Moreover, the low traffic in dense networks decreases the service invocations delay, and makes the solution more scalable. The grouping mechanism localises the traffic, which increases the energy efficiency while improving the scalability. In summary, the experiments demonstrate the benefit of using TRENDY and its techniques in terms of increased energy efficiency and network lifetime, reduced control overhead, better scalability and optimised service invocation time

Regressive Prediction Approach to Vertical Handover in Fourth Generation Wireless Networks

The over increasing demand for deployment of wireless access networks has made wireless mobile devices to face so many challenges in choosing the best suitable network from a set of available access networks. Some of the weighty issues in 4G wireless networks are fastness and seamlessness in handover process. This paper therefore, proposes a handover technique based on movement prediction in wireless mobile (WiMAX and LTE-A) environment. The technique enables the system to predict signal quality between the UE and Radio Base Stations (RBS)/Access Points (APs) in two different networks. Prediction is achieved by employing the Markov Decision Process Model (MDPM) where the movement of the UE is dynamically estimated and averaged to keep track of the signal strength of mobile users. With the help of the prediction, layer-3 handover activities are able to occur prior to layer-2 handover, and therefore, total handover latency can be reduced. The performances of various handover approaches influenced by different metrics (mobility velocities) were evaluated. The results presented demonstrate good accuracy the proposed method was able to achieve in predicting the next signal level by reducing the total handover latency

Handover analysis over mobile WiMAX technology.

As new mobile devices and mobile applications continue to growth, so does the data traffic demand for broadband services access and the user needs toward mobility, thereby, wireless application became today the fastest solution and lowest cost implementation unlike traditional wired deployment such as optical fibers and digital lines. WiMAX technology satisfies this gap through its high network performance over the air interface and high data rates based on the IEEE 802.16-2004 standards, this original specification does not support mobility. Therefore, the IEEE introduces a new standard that enables mobility profiles under 802.16e-2005, from which three different types of handovers process are introduced as hard handover (HHO), macro diversity handover (MDHO) and fast base station switching (FBSS) handover. The objective of this master thesis is to analyze how the handover process affects network performance. The analysis propose three scenarios, built over OPNET simulator to measure the most critical wireless parameter and performance indicator such as throughput, handover success rate, packet drop, delay and network usage.fi=Opinnäytetyö kokotekstinä PDF-muodossa.|en=Thesis fulltext in PDF format.|sv=Lärdomsprov tillgängligt som fulltext i PDF-format