Partial Enumerative Sphere Shaping

The dependency between the Gaussianity of the input distribution for the additive white Gaussian noise (AWGN) channel and the gap-to-capacity is discussed. We show that a set of particular approximations to the Maxwell-Boltzmann (MB) distribution virtually closes most of the shaping gap. We relate these symbol-level distributions to bit-level distributions, and demonstrate that they correspond to keeping some of the amplitude bit-levels uniform and independent of the others. Then we propose partial enumerative sphere shaping (P-ESS) to realize such distributions in the probabilistic amplitude shaping (PAS) framework. Simulations over the AWGN channel exhibit that shaping 2 amplitude bits of 16-ASK have almost the same performance as shaping 3 bits, which is 1.3 dB more power-efficient than uniform signaling at a rate of 3 bit/symbol. In this way, required storage and computational complexity of shaping are reduced by factors of 6 and 3, respectively.Comment: 6 pages, 6 figure

Algebraic number theory and code design for Rayleigh fading channels

Algebraic number theory is having an increasing impact in code design for many different coding applications, such as single antenna fading channels and more recently, MIMO systems. Extended work has been done on single antenna fading channels, and algebraic lattice codes have been proven to be an effective tool. The general framework has been settled in the last ten years and many explicit code constructions based on algebraic number theory are now available. The aim of this work is to provide both an overview on algebraic lattice code designs for Rayleigh fading channels, as well as a tutorial introduction to algebraic number theory. The basic facts of this mathematical field will be illustrated by many examples and by the use of a computer algebra freeware in order to make it more accessible to a large audience

SCMA Codebook Design

Multicarrier CDMA is a multiple access scheme in which modulated QAM symbols are spread over OFDMA tones by using a generally complex spreading sequence. Effectively, a QAM symbol is repeated over multiple tones. Low density signature (LDS) is a version of CDMA with low density spreading sequences allowing us to take advantage of a near optimal message passing algorithm (MPA) receiver with practically feasible complexity. Sparse code multiple access (SCMA) is a multi-dimensional codebook-based non-orthogonal spreading technique. In SCMA, the procedure of bit to QAM symbol mapping and spreading are combined together and incoming bits are directly mapped to multi-dimensional codewords of SCMA codebook sets. Each layer has its dedicated codebook. Shaping gain of a multi-dimensional constellation is one of the main sources of the performance improvement in comparison to the simple repetition of QAM symbols in LDS. Meanwhile, like LDS, SCMA enjoys the low complexity reception techniques due to the sparsity of SCMA codewords. In this paper a systematic approach is proposed to design SCMA codebooks mainly based on the design principles of lattice constellations. Simulation results are presented to show the performance gain of SCMA compared to LDS and OFDMA.Comment: Accepted for IEEE VTC-fall 201

Designing Power-Efficient Modulation Formats for Noncoherent Optical Systems

We optimize modulation formats for the additive white Gaussian noise channel with a nonnegative input constraint, also known as the intensity-modulated direct detection channel, with and without confining them to a lattice structure. Our optimization criteria are the average electrical and optical power. The nonnegativity input signal constraint is translated into a conical constraint in signal space, and modulation formats are designed by sphere packing inside this cone. Some remarkably dense packings are found, which yield more power-efficient modulation formats than previously known. For example, at a spectral efficiency of 1 bit/s/Hz, the obtained modulation format offers a 0.86 dB average electrical power gain and 0.43 dB average optical power gain over the previously best known modulation formats to achieve a symbol error rate of 10^-6. This modulation turns out to have a lattice-based structure. At a spectral efficiency of 3/2 bits/s/Hz and to achieve a symbol error rate of 10^-6, the modulation format obtained for optimizing the average electrical power offers a 0.58 dB average electrical power gain over the best lattice-based modulation and 2.55 dB gain over the best previously known format. However, the modulation format optimized for average optical power offers a 0.46 dB average optical power gain over the best lattice-based modulation and 1.35 dB gain over the best previously known format.Comment: Submitted to Globecom 201